Linux ARM-MSM sub-architecture
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Rajendra Nayak <rnayak@codeaurora.org>
Cc: agross@kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org, swboyd@chromium.org
Subject: Re: [PATCH 2/2] soc: qcom: rpmhpd: Make mx as a parent of cx only for sdm845
Date: Thu, 18 Nov 2021 21:19:27 -0600	[thread overview]
Message-ID: <YZcXvw0KExXvPwSV@builder.lan> (raw)
In-Reply-To: <1637040382-22987-2-git-send-email-rnayak@codeaurora.org>

On Mon 15 Nov 23:26 CST 2021, Rajendra Nayak wrote:

> The requirement to specify the active + sleep and active-only MX power
> domains as the parents of the corresponding CX power domains is applicable
> only on the sdm845 SoC. With the same struct definition reused for all the
> SoCs this condition was wrongly applied to all those SoCs as well, which
> isn't needed. Define new sdm845 specific structures to manage this
> dependency and remove the parent assignements from the common structure.
> 

Looking at the downstream sm8150 dts I see that both cx and mmcx
specifies mx as parent "supply".

Is this not needed or should we instead name these resources
"cx_with_mx_parent" and have sm8150 opt in as well?

Regards,
Bjorn

> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
> ---
>  drivers/soc/qcom/rpmhpd.c | 22 ++++++++++++++++++----
>  1 file changed, 18 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
> index c71481d..12d8ce9 100644
> --- a/drivers/soc/qcom/rpmhpd.c
> +++ b/drivers/soc/qcom/rpmhpd.c
> @@ -108,7 +108,6 @@ static struct rpmhpd cx_ao;
>  static struct rpmhpd cx = {
>  	.pd = { .name = "cx", },
>  	.peer = &cx_ao,
> -	.parent = &mx.pd,
>  	.res_name = "cx.lvl",
>  };
>  
> @@ -116,7 +115,6 @@ static struct rpmhpd cx_ao = {
>  	.pd = { .name = "cx_ao", },
>  	.active_only = true,
>  	.peer = &cx,
> -	.parent = &mx_ao.pd,
>  	.res_name = "cx.lvl",
>  };
>  
> @@ -149,12 +147,28 @@ static struct rpmhpd mxc_ao = {
>  };
>  
>  /* SDM845 RPMH powerdomains */
> +static struct rpmhpd sdm845_cx_ao;
> +static struct rpmhpd sdm845_cx = {
> +	.pd = { .name = "cx", },
> +	.peer = &sdm845_cx_ao,
> +	.parent = &mx.pd,
> +	.res_name = "cx.lvl",
> +};
> +
> +static struct rpmhpd sdm845_cx_ao = {
> +	.pd = { .name = "cx_ao", },
> +	.active_only = true,
> +	.peer = &sdm845_cx,
> +	.parent = &mx_ao.pd,
> +	.res_name = "cx.lvl",
> +};
> +
>  static struct rpmhpd *sdm845_rpmhpds[] = {
>  	[SDM845_EBI] = &ebi,
>  	[SDM845_MX] = &mx,
>  	[SDM845_MX_AO] = &mx_ao,
> -	[SDM845_CX] = &cx,
> -	[SDM845_CX_AO] = &cx_ao,
> +	[SDM845_CX] = &sdm845_cx,
> +	[SDM845_CX_AO] = &sdm845_cx_ao,
>  	[SDM845_LMX] = &lmx,
>  	[SDM845_LCX] = &lcx,
>  	[SDM845_GFX] = &gfx,
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> 

  reply	other threads:[~2021-11-19  3:19 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-16  5:26 [PATCH 1/2] soc: qcom: rpmhpd: Rename rpmhpd struct names Rajendra Nayak
2021-11-16  5:26 ` [PATCH 2/2] soc: qcom: rpmhpd: Make mx as a parent of cx only for sdm845 Rajendra Nayak
2021-11-19  3:19   ` Bjorn Andersson [this message]
2021-11-23  7:15     ` Rajendra Nayak
2021-12-02  7:48       ` Rajendra Nayak
2021-11-18 18:26 ` [PATCH 1/2] soc: qcom: rpmhpd: Rename rpmhpd struct names Matthias Kaehlcke
2021-11-19  3:11 ` Bjorn Andersson
2021-12-01 20:44 ` Stephen Boyd
2021-12-15 22:27 ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YZcXvw0KExXvPwSV@builder.lan \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rnayak@codeaurora.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox