* [PATCH] ARM: dts: qcom: use "okay" for status
@ 2023-01-27 9:53 Krzysztof Kozlowski
2023-01-27 10:03 ` Konrad Dybcio
2023-02-09 4:23 ` Bjorn Andersson
0 siblings, 2 replies; 3+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-27 9:53 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
"okay" over "ok" is preferred:
serial@f991f000: status:0: 'ok' is not one of ['okay', 'disabled', 'reserved']
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts | 2 +-
arch/arm/boot/dts/qcom-sdx55-t55.dts | 6 +++---
arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts | 6 +++---
3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
index 6a082ad4418a..288cacd5d1fa 100644
--- a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
+++ b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
@@ -20,5 +20,5 @@ chosen {
};
&blsp1_uart3 {
- status = "ok";
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom-sdx55-t55.dts
index 61ac5f54cd57..ccf2b8b42b16 100644
--- a/arch/arm/boot/dts/qcom-sdx55-t55.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-t55.dts
@@ -233,7 +233,7 @@ ldo16 {
};
&blsp1_uart3 {
- status = "ok";
+ status = "okay";
};
&ipa {
@@ -243,11 +243,11 @@ &ipa {
};
&qpic_bam {
- status = "ok";
+ status = "okay";
};
&qpic_nand {
- status = "ok";
+ status = "okay";
nand@0 {
reg = <0>;
diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
index c9c1f7da1261..db7b3d5b0bd0 100644
--- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
@@ -233,7 +233,7 @@ ldo16 {
};
&blsp1_uart3 {
- status = "ok";
+ status = "okay";
};
&ipa {
@@ -258,11 +258,11 @@ &pcie_ep {
};
&qpic_bam {
- status = "ok";
+ status = "okay";
};
&qpic_nand {
- status = "ok";
+ status = "okay";
nand@0 {
reg = <0>;
--
2.34.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] ARM: dts: qcom: use "okay" for status
2023-01-27 9:53 [PATCH] ARM: dts: qcom: use "okay" for status Krzysztof Kozlowski
@ 2023-01-27 10:03 ` Konrad Dybcio
2023-02-09 4:23 ` Bjorn Andersson
1 sibling, 0 replies; 3+ messages in thread
From: Konrad Dybcio @ 2023-01-27 10:03 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
On 27.01.2023 10:53, Krzysztof Kozlowski wrote:
> "okay" over "ok" is preferred:
>
> serial@f991f000: status:0: 'ok' is not one of ['okay', 'disabled', 'reserved']
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts | 2 +-
> arch/arm/boot/dts/qcom-sdx55-t55.dts | 6 +++---
> arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts | 6 +++---
> 3 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
> index 6a082ad4418a..288cacd5d1fa 100644
> --- a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
> +++ b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
> @@ -20,5 +20,5 @@ chosen {
> };
>
> &blsp1_uart3 {
> - status = "ok";
> + status = "okay";
> };
> diff --git a/arch/arm/boot/dts/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom-sdx55-t55.dts
> index 61ac5f54cd57..ccf2b8b42b16 100644
> --- a/arch/arm/boot/dts/qcom-sdx55-t55.dts
> +++ b/arch/arm/boot/dts/qcom-sdx55-t55.dts
> @@ -233,7 +233,7 @@ ldo16 {
> };
>
> &blsp1_uart3 {
> - status = "ok";
> + status = "okay";
> };
>
> &ipa {
> @@ -243,11 +243,11 @@ &ipa {
> };
>
> &qpic_bam {
> - status = "ok";
> + status = "okay";
> };
>
> &qpic_nand {
> - status = "ok";
> + status = "okay";
>
> nand@0 {
> reg = <0>;
> diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
> index c9c1f7da1261..db7b3d5b0bd0 100644
> --- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
> +++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
> @@ -233,7 +233,7 @@ ldo16 {
> };
>
> &blsp1_uart3 {
> - status = "ok";
> + status = "okay";
> };
>
> &ipa {
> @@ -258,11 +258,11 @@ &pcie_ep {
> };
>
> &qpic_bam {
> - status = "ok";
> + status = "okay";
> };
>
> &qpic_nand {
> - status = "ok";
> + status = "okay";
>
> nand@0 {
> reg = <0>;
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] ARM: dts: qcom: use "okay" for status
2023-01-27 9:53 [PATCH] ARM: dts: qcom: use "okay" for status Krzysztof Kozlowski
2023-01-27 10:03 ` Konrad Dybcio
@ 2023-02-09 4:23 ` Bjorn Andersson
1 sibling, 0 replies; 3+ messages in thread
From: Bjorn Andersson @ 2023-02-09 4:23 UTC (permalink / raw)
To: Andy Gross, Rob Herring, Krzysztof Kozlowski, Konrad Dybcio,
devicetree, linux-kernel, Krzysztof Kozlowski, linux-arm-msm
On Fri, 27 Jan 2023 10:53:19 +0100, Krzysztof Kozlowski wrote:
> "okay" over "ok" is preferred:
>
> serial@f991f000: status:0: 'ok' is not one of ['okay', 'disabled', 'reserved']
>
>
Applied, thanks!
[1/1] ARM: dts: qcom: use "okay" for status
commit: 8676ff664b0ec6de46adf1abc59b7903c6b6049c
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-02-09 4:31 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-01-27 9:53 [PATCH] ARM: dts: qcom: use "okay" for status Krzysztof Kozlowski
2023-01-27 10:03 ` Konrad Dybcio
2023-02-09 4:23 ` Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox