[PATCH 00/27] clk: remove deprecated API divider_round_rate() and friends

[PATCH 00/27] clk: remove deprecated API divider_round_rate() and friends

[Brian Masney]

Here's a series that gets rid of the deprecated APIs
divider_round_rate(), divider_round_rate_parent(), and
divider_ro_round_rate_parent() since these functions are just wrappers
for the determine_rate variant.

Note that when I converted some of these drivers from round_rate to
determine_rate, this was mistakenly converted to the following in some
cases:

    req->rate = divider_round_rate(...)

This is invalid in the case when an error occurs since it can set the
rate to a negative value. So this series fixes those bugs and removes
the deprecated APIs all in one go.

Three of the patches ended up being a more complicated migration, and I
put them as the first three patches in this series (clk: sophgo:
cv18xx-ip), (clk: sunxi-ng), and (rtc: ac100). The remaining patches I
feel are all straight forward.

Merge strategy
==============

Only three of the patches are outside of drivers/clk (drm/msm, phy, and
rtc). For simplicity, I think it would be easiest if Stephen takes this
whole series through the clk tree. Subsystem maintainers please leave an
Acked-by for Stephen. Thanks!

Signed-off-by: Brian Masney <bmasney@redhat.com>
---
Brian Masney (27):
      clk: sophgo: cv18xx-ip: convert from divider_round_rate() to divider_determine_rate()
      clk: sunxi-ng: convert from divider_round_rate_parent() to divider_determine_rate()
      rtc: ac100: convert from divider_round_rate() to divider_determine_rate()
      clk: actions: owl-composite: convert from owl_divider_helper_round_rate() to divider_determine_rate()
      clk: actions: owl-divider: convert from divider_round_rate() to divider_determine_rate()
      clk: bm1880: convert from divider_ro_round_rate() to divider_ro_determine_rate()
      clk: bm1880: convert from divider_round_rate() to divider_determine_rate()
      clk: hisilicon: clkdivider-hi6220: convert from divider_round_rate() to divider_determine_rate()
      clk: loongson1: convert from divider_round_rate() to divider_determine_rate()
      clk: milbeaut: convert from divider_ro_round_rate() to divider_ro_determine_rate()
      clk: milbeaut: convert from divider_round_rate() to divider_determine_rate()
      clk: nuvoton: ma35d1-divider: convert from divider_round_rate() to divider_determine_rate()
      clk: nxp: lpc32xx: convert from divider_round_rate() to divider_determine_rate()
      clk: qcom: alpha-pll: convert from divider_round_rate() to divider_determine_rate()
      clk: qcom: regmap-divider: convert from divider_ro_round_rate() to divider_ro_determine_rate()
      clk: qcom: regmap-divider: convert from divider_round_rate() to divider_determine_rate()
      clk: sophgo: sg2042-clkgen: convert from divider_round_rate() to divider_determine_rate()
      clk: sprd: div: convert from divider_round_rate() to divider_determine_rate()
      clk: stm32: stm32-core: convert from divider_ro_round_rate() to divider_ro_determine_rate()
      clk: stm32: stm32-core: convert from divider_round_rate_parent() to divider_determine_rate()
      clk: versaclock3: convert from divider_round_rate() to divider_determine_rate()
      clk: x86: cgu: convert from divider_round_rate() to divider_determine_rate()
      clk: zynqmp: divider: convert from divider_round_rate() to divider_determine_rate()
      drm/msm/dsi_phy_14nm: convert from divider_round_rate() to divider_determine_rate()
      phy: ti: phy-j721e-wiz: convert from divider_round_rate() to divider_determine_rate()
      clk: divider: remove divider_ro_round_rate_parent()
      clk: divider: remove divider_round_rate() and divider_round_rate_parent()

 drivers/clk/actions/owl-composite.c        |  11 +--
 drivers/clk/actions/owl-divider.c          |  17 +---
 drivers/clk/actions/owl-divider.h          |   5 -
 drivers/clk/clk-bm1880.c                   |  13 +--
 drivers/clk/clk-divider.c                  |  44 ---------
 drivers/clk/clk-loongson1.c                |   5 +-
 drivers/clk/clk-milbeaut.c                 |  15 +--
 drivers/clk/clk-versaclock3.c              |   7 +-
 drivers/clk/hisilicon/clkdivider-hi6220.c  |   6 +-
 drivers/clk/nuvoton/clk-ma35d1-divider.c   |   7 +-
 drivers/clk/nxp/clk-lpc32xx.c              |   6 +-
 drivers/clk/qcom/clk-alpha-pll.c           |  21 ++--
 drivers/clk/qcom/clk-regmap-divider.c      |  16 +--
 drivers/clk/sophgo/clk-cv18xx-ip.c         | 154 ++++++++++++++++-------------
 drivers/clk/sophgo/clk-sg2042-clkgen.c     |  15 +--
 drivers/clk/sprd/div.c                     |   6 +-
 drivers/clk/stm32/clk-stm32-core.c         |  42 +++-----
 drivers/clk/sunxi-ng/ccu_div.c             |  25 +++--
 drivers/clk/sunxi-ng/ccu_mp.c              |  26 ++---
 drivers/clk/sunxi-ng/ccu_mult.c            |  16 +--
 drivers/clk/sunxi-ng/ccu_mux.c             |  49 +++++----
 drivers/clk/sunxi-ng/ccu_mux.h             |   8 +-
 drivers/clk/sunxi-ng/ccu_nkm.c             |  25 ++---
 drivers/clk/x86/clk-cgu.c                  |   6 +-
 drivers/clk/zynqmp/divider.c               |   5 +-
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c |   7 +-
 drivers/phy/ti/phy-j721e-wiz.c             |   5 +-
 drivers/rtc/rtc-ac100.c                    |  75 +++++++-------
 include/linux/clk-provider.h               |  28 ------
 29 files changed, 257 insertions(+), 408 deletions(-)
---
base-commit: f8f97927abf7c12382dddc93a144fc9df7919b77
change-id: 20260107-clk-divider-round-rate-1cfd117b0670

Best regards,
-- 
Brian Masney <bmasney@redhat.com>

[PATCH 14/27] clk: qcom: alpha-pll: convert from divider_round_rate() to divider_determine_rate()

[Brian Masney]

The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.

Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:

    req->rate = divider_round_rate(...)

This is invalid in the case when an error occurs since it can set the
rate to a negative value.

Fixes: 0e56e3369b60 ("clk: qcom: alpha-pll: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>

---
To: Bjorn Andersson <andersson@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
---
 drivers/clk/qcom/clk-alpha-pll.c | 21 ++++++---------------
 1 file changed, 6 insertions(+), 15 deletions(-)

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 6aeba40358c11e44c5f39d15f149d62149393cd3..a84e8bee6534629bf578af6d2592ea998f6c9090 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -1257,11 +1257,8 @@ static int clk_alpha_pll_postdiv_determine_rate(struct clk_hw *hw,
 	else
 		table = clk_alpha_div_table;
 
-	req->rate = divider_round_rate(hw, req->rate, &req->best_parent_rate,
-				       table, pll->width,
-				       CLK_DIVIDER_POWER_OF_TWO);
-
-	return 0;
+	return divider_determine_rate(hw, req, table, pll->width,
+				      CLK_DIVIDER_POWER_OF_TWO);
 }
 
 static int clk_alpha_pll_postdiv_ro_determine_rate(struct clk_hw *hw,
@@ -1617,11 +1614,8 @@ static int clk_trion_pll_postdiv_determine_rate(struct clk_hw *hw,
 {
 	struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
 
-	req->rate = divider_round_rate(hw, req->rate, &req->best_parent_rate,
-				       pll->post_div_table,
-				       pll->width, CLK_DIVIDER_ROUND_CLOSEST);
-
-	return 0;
+	return divider_determine_rate(hw, req, pll->post_div_table, pll->width,
+				      CLK_DIVIDER_ROUND_CLOSEST);
 };
 
 static int
@@ -1657,11 +1651,8 @@ static int clk_alpha_pll_postdiv_fabia_determine_rate(struct clk_hw *hw,
 {
 	struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
 
-	req->rate = divider_round_rate(hw, req->rate, &req->best_parent_rate,
-				       pll->post_div_table,
-				       pll->width, CLK_DIVIDER_ROUND_CLOSEST);
-
-	return 0;
+	return divider_determine_rate(hw, req, pll->post_div_table, pll->width,
+				      CLK_DIVIDER_ROUND_CLOSEST);
 }
 
 static int clk_alpha_pll_postdiv_fabia_set_rate(struct clk_hw *hw,

-- 
2.52.0

[PATCH 15/27] clk: qcom: regmap-divider: convert from divider_ro_round_rate() to divider_ro_determine_rate()

[Brian Masney]

The divider_ro_round_rate() function is now deprecated, so let's migrate
to divider_ro_determine_rate() instead so that this deprecated API can
be removed.

Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:

    req->rate = divider_round_rate(...)

This is invalid in the case when an error occurs since it can set the
rate to a negative value.

Fixes: 859a7e020b23 ("clk: qcom: regmap-divider: convert from divider_round_rate() to divider_determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>

---
To: Bjorn Andersson <andersson@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
---
 drivers/clk/qcom/clk-regmap-divider.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/qcom/clk-regmap-divider.c b/drivers/clk/qcom/clk-regmap-divider.c
index 4f5395f0ab6d0ed8cebbb32cc231063932ba85a1..af9c01dd785372166122224e717c119a2365f4e1 100644
--- a/drivers/clk/qcom/clk-regmap-divider.c
+++ b/drivers/clk/qcom/clk-regmap-divider.c
@@ -26,12 +26,8 @@ static int div_ro_determine_rate(struct clk_hw *hw,
 	val >>= divider->shift;
 	val &= BIT(divider->width) - 1;
 
-	req->rate = divider_ro_round_rate(hw, req->rate,
-					  &req->best_parent_rate, NULL,
-					  divider->width,
-					  CLK_DIVIDER_ROUND_CLOSEST, val);
-
-	return 0;
+	return divider_ro_determine_rate(hw, req, NULL, divider->width,
+					 CLK_DIVIDER_ROUND_CLOSEST, val);
 }
 
 static int div_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)

-- 
2.52.0

[PATCH 16/27] clk: qcom: regmap-divider: convert from divider_round_rate() to divider_determine_rate()

[Brian Masney]

The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.

Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:

    req->rate = divider_round_rate(...)

This is invalid in the case when an error occurs since it can set the
rate to a negative value.

Fixes: b6f90511c165 ("clk: qcom: regmap-divider: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>

---
To: Bjorn Andersson <andersson@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
---
 drivers/clk/qcom/clk-regmap-divider.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/qcom/clk-regmap-divider.c b/drivers/clk/qcom/clk-regmap-divider.c
index af9c01dd785372166122224e717c119a2365f4e1..672e82caf2050446d14e64617a4b90d0b09201a4 100644
--- a/drivers/clk/qcom/clk-regmap-divider.c
+++ b/drivers/clk/qcom/clk-regmap-divider.c
@@ -34,12 +34,8 @@ static int div_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
 {
 	struct clk_regmap_div *divider = to_clk_regmap_div(hw);
 
-	req->rate = divider_round_rate(hw, req->rate, &req->best_parent_rate,
-				       NULL,
-				       divider->width,
-				       CLK_DIVIDER_ROUND_CLOSEST);
-
-	return 0;
+	return divider_determine_rate(hw, req, NULL, divider->width,
+				      CLK_DIVIDER_ROUND_CLOSEST);
 }
 
 static int div_set_rate(struct clk_hw *hw, unsigned long rate,

-- 
2.52.0

[PATCH 24/27] drm/msm/dsi_phy_14nm: convert from divider_round_rate() to divider_determine_rate()

[Brian Masney]

The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.

Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:

    req->rate = divider_round_rate(...)

This is invalid in the case when an error occurs since it can set the
rate to a negative value.

Fixes: cc41f29a6b04 ("drm/msm/dsi_phy_14nm: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>

---
To: Rob Clark <robin.clark@oss.qualcomm.com>
To: Dmitry Baryshkov <lumag@kernel.org>
To: David Airlie <airlied@gmail.com>
To: Simona Vetter <simona@ffwll.ch>
Cc: Abhinav Kumar <abhinav.kumar@linux.dev>
Cc: Jessica Zhang <jesszhan0024@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
index fdefcbd9c2848a1c76414a41b811b29e5fed9ddc..a156c7e7cea83286e7ad47aa9818761670c68e89 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
@@ -628,12 +628,7 @@ static int dsi_pll_14nm_postdiv_determine_rate(struct clk_hw *hw,
 
 	DBG("DSI%d PLL parent rate=%lu", pll_14nm->phy->id, req->rate);
 
-	req->rate = divider_round_rate(hw, req->rate, &req->best_parent_rate,
-				       NULL,
-				       postdiv->width,
-				       postdiv->flags);
-
-	return 0;
+	return divider_determine_rate(hw, req, NULL, postdiv->width, postdiv->flags);
 }
 
 static int dsi_pll_14nm_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,

-- 
2.52.0

Re: [PATCH 14/27] clk: qcom: alpha-pll: convert from divider_round_rate() to divider_determine_rate()

[Konrad Dybcio]

On 1/8/26 10:16 PM, Brian Masney wrote:
> The divider_round_rate() function is now deprecated, so let's migrate
> to divider_determine_rate() instead so that this deprecated API can be
> removed.
> 
> Note that when the main function itself was migrated to use
> determine_rate, this was mistakenly converted to:
> 
>     req->rate = divider_round_rate(...)
> 
> This is invalid in the case when an error occurs since it can set the
> rate to a negative value.
> 
> Fixes: 0e56e3369b60 ("clk: qcom: alpha-pll: convert from round_rate() to determine_rate()")
> Signed-off-by: Brian Masney <bmasney@redhat.com>
> 
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH 15/27] clk: qcom: regmap-divider: convert from divider_ro_round_rate() to divider_ro_determine_rate()

[Konrad Dybcio]

On 1/8/26 10:16 PM, Brian Masney wrote:
> The divider_ro_round_rate() function is now deprecated, so let's migrate
> to divider_ro_determine_rate() instead so that this deprecated API can
> be removed.
> 
> Note that when the main function itself was migrated to use
> determine_rate, this was mistakenly converted to:
> 
>     req->rate = divider_round_rate(...)
> 
> This is invalid in the case when an error occurs since it can set the
> rate to a negative value.
> 
> Fixes: 859a7e020b23 ("clk: qcom: regmap-divider: convert from divider_round_rate() to divider_determine_rate()")
> Signed-off-by: Brian Masney <bmasney@redhat.com>
> 
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH 16/27] clk: qcom: regmap-divider: convert from divider_round_rate() to divider_determine_rate()

[Konrad Dybcio]

On 1/8/26 10:16 PM, Brian Masney wrote:
> The divider_round_rate() function is now deprecated, so let's migrate
> to divider_determine_rate() instead so that this deprecated API can be
> removed.
> 
> Note that when the main function itself was migrated to use
> determine_rate, this was mistakenly converted to:
> 
>     req->rate = divider_round_rate(...)
> 
> This is invalid in the case when an error occurs since it can set the
> rate to a negative value.
> 
> Fixes: b6f90511c165 ("clk: qcom: regmap-divider: convert from round_rate() to determine_rate()")
> Signed-off-by: Brian Masney <bmasney@redhat.com>
> 
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH 24/27] drm/msm/dsi_phy_14nm: convert from divider_round_rate() to divider_determine_rate()

[Konrad Dybcio]

On 1/8/26 10:16 PM, Brian Masney wrote:
> The divider_round_rate() function is now deprecated, so let's migrate
> to divider_determine_rate() instead so that this deprecated API can be
> removed.
> 
> Note that when the main function itself was migrated to use
> determine_rate, this was mistakenly converted to:
> 
>     req->rate = divider_round_rate(...)
> 
> This is invalid in the case when an error occurs since it can set the
> rate to a negative value.
> 
> Fixes: cc41f29a6b04 ("drm/msm/dsi_phy_14nm: convert from round_rate() to determine_rate()")
> Signed-off-by: Brian Masney <bmasney@redhat.com>
> 
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH 14/27] clk: qcom: alpha-pll: convert from divider_round_rate() to divider_determine_rate()

[Abel Vesa]

On 26-01-08 16:16:32, Brian Masney wrote:
> The divider_round_rate() function is now deprecated, so let's migrate
> to divider_determine_rate() instead so that this deprecated API can be
> removed.
> 
> Note that when the main function itself was migrated to use
> determine_rate, this was mistakenly converted to:
> 
>     req->rate = divider_round_rate(...)
> 
> This is invalid in the case when an error occurs since it can set the
> rate to a negative value.
> 
> Fixes: 0e56e3369b60 ("clk: qcom: alpha-pll: convert from round_rate() to determine_rate()")
> Signed-off-by: Brian Masney <bmasney@redhat.com>

Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>

Re: [PATCH 15/27] clk: qcom: regmap-divider: convert from divider_ro_round_rate() to divider_ro_determine_rate()

[Abel Vesa]

On 26-01-08 16:16:33, Brian Masney wrote:
> The divider_ro_round_rate() function is now deprecated, so let's migrate
> to divider_ro_determine_rate() instead so that this deprecated API can
> be removed.
> 
> Note that when the main function itself was migrated to use
> determine_rate, this was mistakenly converted to:
> 
>     req->rate = divider_round_rate(...)
> 
> This is invalid in the case when an error occurs since it can set the
> rate to a negative value.
> 
> Fixes: 859a7e020b23 ("clk: qcom: regmap-divider: convert from divider_round_rate() to divider_determine_rate()")
> Signed-off-by: Brian Masney <bmasney@redhat.com>

Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>

Re: [PATCH 16/27] clk: qcom: regmap-divider: convert from divider_round_rate() to divider_determine_rate()

[Abel Vesa]

On 26-01-08 16:16:34, Brian Masney wrote:
> The divider_round_rate() function is now deprecated, so let's migrate
> to divider_determine_rate() instead so that this deprecated API can be
> removed.
> 
> Note that when the main function itself was migrated to use
> determine_rate, this was mistakenly converted to:
> 
>     req->rate = divider_round_rate(...)
> 
> This is invalid in the case when an error occurs since it can set the
> rate to a negative value.
> 
> Fixes: b6f90511c165 ("clk: qcom: regmap-divider: convert from round_rate() to determine_rate()")
> Signed-off-by: Brian Masney <bmasney@redhat.com>

Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>

Re: [PATCH 24/27] drm/msm/dsi_phy_14nm: convert from divider_round_rate() to divider_determine_rate()

[Abel Vesa]

On 26-01-08 16:16:42, Brian Masney wrote:
> The divider_round_rate() function is now deprecated, so let's migrate
> to divider_determine_rate() instead so that this deprecated API can be
> removed.
> 
> Note that when the main function itself was migrated to use
> determine_rate, this was mistakenly converted to:
> 
>     req->rate = divider_round_rate(...)
> 
> This is invalid in the case when an error occurs since it can set the
> rate to a negative value.
> 
> Fixes: cc41f29a6b04 ("drm/msm/dsi_phy_14nm: convert from round_rate() to determine_rate()")
> Signed-off-by: Brian Masney <bmasney@redhat.com>

Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>

Re: (subset) [PATCH 00/27] clk: remove deprecated API divider_round_rate() and friends

[Bjorn Andersson]

On Thu, 08 Jan 2026 16:16:18 -0500, Brian Masney wrote:
> Here's a series that gets rid of the deprecated APIs
> divider_round_rate(), divider_round_rate_parent(), and
> divider_ro_round_rate_parent() since these functions are just wrappers
> for the determine_rate variant.
> 
> Note that when I converted some of these drivers from round_rate to
> determine_rate, this was mistakenly converted to the following in some
> cases:
> 
> [...]

Applied, thanks!

[14/27] clk: qcom: alpha-pll: convert from divider_round_rate() to divider_determine_rate()
        commit: e1f08613e113f02a3ec18c9a7964de97f940acbf
[15/27] clk: qcom: regmap-divider: convert from divider_ro_round_rate() to divider_ro_determine_rate()
        commit: 35a48f41b63f67c490f3a2a89b042536be67cf0f
[16/27] clk: qcom: regmap-divider: convert from divider_round_rate() to divider_determine_rate()
        commit: b2f36d675e09299d9aee395c6f83d8a95d4c9441

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

Re: [PATCH 00/27] clk: remove deprecated API divider_round_rate() and friends

[Dmitry Baryshkov]

On Thu, 08 Jan 2026 16:16:18 -0500, Brian Masney wrote:
> Here's a series that gets rid of the deprecated APIs
> divider_round_rate(), divider_round_rate_parent(), and
> divider_ro_round_rate_parent() since these functions are just wrappers
> for the determine_rate variant.
> 
> Note that when I converted some of these drivers from round_rate to
> determine_rate, this was mistakenly converted to the following in some
> cases:
> 
> [...]

Applied to msm-next, thanks!

[24/27] drm/msm/dsi_phy_14nm: convert from divider_round_rate() to divider_determine_rate()
        https://gitlab.freedesktop.org/lumag/msm/-/commit/1d232f793d4d

Best regards,
-- 
With best wishes
Dmitry

Re: [PATCH 00/27] clk: remove deprecated API divider_round_rate() and friends

[Brian Masney]

Hi Stephen,

On Thu, Jan 08, 2026 at 04:16:18PM -0500, Brian Masney wrote:
> Here's a series that gets rid of the deprecated APIs
> divider_round_rate(), divider_round_rate_parent(), and
> divider_ro_round_rate_parent() since these functions are just wrappers
> for the determine_rate variant.

I sent you a GIT PULL for what can go to Linus for the upcoming merge
window from this series:

https://lore.kernel.org/linux-clk/aXFYU324yQ6uBmk0@redhat.com/T/#u

Thanks,

Brian

Re: (subset) [PATCH 00/27] clk: remove deprecated API divider_round_rate() and friends

[Vinod Koul]

On Thu, 08 Jan 2026 16:16:18 -0500, Brian Masney wrote:
> Here's a series that gets rid of the deprecated APIs
> divider_round_rate(), divider_round_rate_parent(), and
> divider_ro_round_rate_parent() since these functions are just wrappers
> for the determine_rate variant.
> 
> Note that when I converted some of these drivers from round_rate to
> determine_rate, this was mistakenly converted to the following in some
> cases:
> 
> [...]

Applied, thanks!

[25/27] phy: ti: phy-j721e-wiz: convert from divider_round_rate() to divider_determine_rate()
        commit: dbeea86fecef7cf2b93aded4525d74f6277376ef

Best regards,
-- 
~Vinod