From: Krzysztof Kozlowski <krzk@kernel.org>
To: weifu wu <wwfu06@163.com>, andersson@kernel.org, konradybcio@kernel.org
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/2] arm64: dts: qcom: add Acer Swift SFA14-11 device tree
Date: Mon, 5 Jan 2026 13:04:06 +0100 [thread overview]
Message-ID: <b046f769-6586-487c-8c11-f3eabefe78f4@kernel.org> (raw)
In-Reply-To: <20260105110431.2596253-2-wwfu06@163.com>
On 05/01/2026 12:04, weifu wu wrote:
> Add initial device tree for Acer Swift SFA14-11 laptop based on Qualcomm X1E78100 SoC.
Still not properly wrapped.
You keep ignoring feedback, so for the last time: can you please read
it, respond to it and implement it?
>
> This enables basic peripherals including eDP panel, backlight, USB and PCIe.
>
> Tested by building dtbs and booting on the target hardware.
Irrelevant. I already wrote that you cannot test by building.
I am not reviewing the rest because you keep ignoring EXISTING feedback,
except one more comment
>
> Signed-off-by: weifu wu <wwfu06@163.com>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 2 +
> .../dts/qcom/x1e78100-acer-swift-sfa14-11.dts | 1650 +++++++++++++++++
> 2 files changed, 1652 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/x1e78100-acer-swift-sfa14-11.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 76cf0115a00a..d8b4d91dec82 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -326,6 +326,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8750-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8750-qrd.dtb
> x1e001de-devkit-el2-dtbs := x1e001de-devkit.dtb x1-el2.dtbo
> dtb-$(CONFIG_ARCH_QCOM) += x1e001de-devkit.dtb x1e001de-devkit-el2.dtb
> +x1e78100-acer-swift-sfa14-11-el2-dtbs := x1e78100-acer-swift-sfa14-11.dtb x1-el2.dtbo
> +dtb-$(CONFIG_ARCH_QCOM) += x1e78100-acer-swift-sfa14-11.dtb x1e78100-acer-swift-sfa14-11-el2.dtb
> x1e78100-lenovo-thinkpad-t14s-el2-dtbs := x1e78100-lenovo-thinkpad-t14s.dtb x1-el2.dtbo
> dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s.dtb x1e78100-lenovo-thinkpad-t14s-el2.dtb
> x1e78100-lenovo-thinkpad-t14s-oled-el2-dtbs := x1e78100-lenovo-thinkpad-t14s-oled.dtb x1-el2.dtbo
> diff --git a/arch/arm64/boot/dts/qcom/x1e78100-acer-swift-sfa14-11.dts b/arch/arm64/boot/dts/qcom/x1e78100-acer-swift-sfa14-11.dts
> new file mode 100644
> index 000000000000..b962d00f756d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/x1e78100-acer-swift-sfa14-11.dts
> @@ -0,0 +1,1650 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2024, Linaro Limited
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/gpio-keys.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +
> +#include "hamoa.dtsi"
> +#include "hamoa-pmics.dtsi"
> +
> +/ {
> + model = "Acer Swift 14 Go Pro AI (SFA14-11)";
> + compatible = "acer,swift-sfa14-11", "lenovo,thinkpad-t14s", "qcom,x1e78100", "qcom,x1e80100";
I told you did not test it. You never replied to it. This is wrong and
simple dtbs_check would tell you that. You never asked for any
clarification, just sent the same THIRD TIME.
So I am done with this, NAK.
Respond to EACH of the reviews according to mailing list style.
Best regards,
Krzysztof
next prev parent reply other threads:[~2026-01-05 12:04 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-05 11:04 [PATCH v2 0/2] Add Acer Swift SFA14-11 DT and bindings weifu wu
2026-01-05 11:04 ` [PATCH v2 1/2] arm64: dts: qcom: add Acer Swift SFA14-11 device tree weifu wu
2026-01-05 12:04 ` Krzysztof Kozlowski [this message]
2026-01-05 15:05 ` Bjorn Andersson
2026-01-05 11:04 ` [PATCH v2 2/2] dt-bindings: arm: qcom: add Acer Swift SFA14-11 weifu wu
2026-01-05 12:01 ` Krzysztof Kozlowski
2026-01-05 12:08 ` [PATCH v2 0/2] Add Acer Swift SFA14-11 DT and bindings Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b046f769-6586-487c-8c11-f3eabefe78f4@kernel.org \
--to=krzk@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=wwfu06@163.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox