Re: [PATCH v3 08/11] coresight-tpdm: Add nodes to configure pattern match output

[Suzuki K Poulose <suzuki.poulose@arm.com>]

On 23/03/2023 06:04, Tao Zhang wrote:
> Add nodes to configure trigger pattern and trigger pattern mask.
> Each DSB subunit TPDM has maximum of n(n<7) XPR registers to
> configure trigger pattern match output. Eight 32 bit registers
> providing DSB interface trigger output pattern match comparison.
> And each DSB subunit TPDM has maximum of m(m<7) XPMR registers to
> configure trigger pattern mask match output. Eight 32 bit
> registers providing DSB interface trigger output pattern match
> mask.
> 
> Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
> ---
>   .../ABI/testing/sysfs-bus-coresight-devices-tpdm   | 24 +++++++
>   drivers/hwtracing/coresight/coresight-tpdm.c       | 84 ++++++++++++++++++++++
>   drivers/hwtracing/coresight/coresight-tpdm.h       |  8 +++
>   3 files changed, 116 insertions(+)
> 
> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
> index 094d624..c06374f 100644
> --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
> @@ -71,3 +71,27 @@ Description:
>   		value 1: Start EDCMR register number
>   		value 2: End EDCMR register number
>   		value 3: The value need to be written
> +
> +What:		/sys/bus/coresight/devices/<tpdm-name>/dsb_trig_patt_val
> +Date:		March 2023
> +KernelVersion	6.3
> +Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
> +Description:
> +		(Write) Set the trigger pattern value of DSB tpdm.
> +		Read the trigger pattern value of DSB tpdm.
> +
> +		Accepts the following two values.
> +		value 1: Index number of XPR register
> +		value 2: The value need to be written

minor nit: What values are acceptable ? Otherwise looks fine.

Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>