From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Mohammad Rafi Shaik <quic_mohs@quicinc.com>,
Banajit Goswami <bgoswami@quicinc.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org, linux-arm-msm@vger.kernel.org,
linux-sound@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, quic_rohkumar@quicinc.com,
quic_pkumpatl@quicinc.com,
Konrad Dybcio <konrad.dybcio@linaro.org>
Subject: Re: [RESEND v5 6/7] ASoC: codecs: wcd937x: add capture dapm widgets
Date: Mon, 10 Jun 2024 08:05:18 +0100 [thread overview]
Message-ID: <ba911ebd-aef5-46af-ace1-84d13bee6876@linaro.org> (raw)
In-Reply-To: <20240527111956.444425-7-quic_mohs@quicinc.com>
On 27/05/2024 12:19, Mohammad Rafi Shaik wrote:
> +static int __wcd937x_codec_enable_micbias(struct snd_soc_dapm_widget *w,
> + int event)
> +{
> + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
> + int micb_num;
> +
> + if (strnstr(w->name, "MIC BIAS1", sizeof("MIC BIAS1")))
> + micb_num = MIC_BIAS_1;
> + else if (strnstr(w->name, "MIC BIAS2", sizeof("MIC BIAS2")))
> + micb_num = MIC_BIAS_2;
> + else if (strnstr(w->name, "MIC BIAS3", sizeof("MIC BIAS3")))
> + micb_num = MIC_BIAS_3;
> + else
> + return -EINVAL;
> +
See last comment..
> + switch (event) {
> + case SND_SOC_DAPM_PRE_PMU:
> + wcd937x_micbias_control(component, micb_num,
> + MICB_ENABLE, true);
> + break;
> + case SND_SOC_DAPM_POST_PMU:
> + usleep_range(1000, 1100);
> + break;
> + case SND_SOC_DAPM_POST_PMD:
> + wcd937x_micbias_control(component, micb_num,
> + MICB_DISABLE, true);
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static int wcd937x_codec_enable_micbias(struct snd_soc_dapm_widget *w,
> + struct snd_kcontrol *kcontrol,
> + int event)
> +{
> + return __wcd937x_codec_enable_micbias(w, event);
> +}
> +
> +static int __wcd937x_codec_enable_micbias_pullup(struct snd_soc_dapm_widget *w,
> + int event)
> +{
> + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
> + int micb_num;
> +
> + if (strnstr(w->name, "VA MIC BIAS1", sizeof("VA MIC BIAS1")))
> + micb_num = MIC_BIAS_1;
> + else if (strnstr(w->name, "VA MIC BIAS2", sizeof("VA MIC BIAS2")))
> + micb_num = MIC_BIAS_2;
> + else if (strnstr(w->name, "VA MIC BIAS3", sizeof("VA MIC BIAS3")))
> + micb_num = MIC_BIAS_3;
> + else
> + return -EINVAL;
> +
same..
> + switch (event) {
> + case SND_SOC_DAPM_PRE_PMU:
> + wcd937x_micbias_control(component, micb_num, MICB_PULLUP_ENABLE, true);
> + break;
> + case SND_SOC_DAPM_POST_PMU:
> + usleep_range(1000, 1100);
> + break;
> + case SND_SOC_DAPM_POST_PMD:
> + wcd937x_micbias_control(component, micb_num, MICB_PULLUP_DISABLE, true);
> + break;
> + }
> +
> + return 0;
> +}
> +
...
> static const struct snd_soc_dapm_widget wcd937x_dapm_widgets[] = {
...> + /* MIC_BIAS widgets */
> + SND_SOC_DAPM_SUPPLY("MIC BIAS1", SND_SOC_NOPM, 0, 0,
Please use shift here like
SND_SOC_DAPM_SUPPLY("MIC BIAS1", SND_SOC_NOPM, MIC_BIAS_1, 0,
SND_SOC_DAPM_SUPPLY("MIC BIAS2", SND_SOC_NOPM, MIC_BIAS_2, 0,
to avoid doing a string compares on wideget name.
--srini
> + wcd937x_codec_enable_micbias,
> + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
> + SND_SOC_DAPM_POST_PMD),
> + SND_SOC_DAPM_SUPPLY("MIC BIAS2", SND_SOC_NOPM, 0, 0,
> + wcd937x_codec_enable_micbias,
> + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
> + SND_SOC_DAPM_POST_PMD),
> + SND_SOC_DAPM_SUPPLY("MIC BIAS3", SND_SOC_NOPM, 0, 0,
> + wcd937x_codec_enable_micbias,
> + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
> + SND_SOC_DAPM_POST_PMD),
> +
> SND_SOC_DAPM_SUPPLY("VDD_BUCK", SND_SOC_NOPM, 0, 0,
> wcd937x_codec_enable_vdd_buck,
> SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
> @@ -2007,11 +2312,101 @@ static const struct snd_soc_dapm_widget wcd937x_dapm_widgets[] = {
> SND_SOC_DAPM_MIXER("HPHR_RDAC", SND_SOC_NOPM, 0, 0,
> hphr_rdac_switch, ARRAY_SIZE(hphr_rdac_switch)),
>
> + /* TX output widgets */
> + SND_SOC_DAPM_OUTPUT("ADC1_OUTPUT"),
> + SND_SOC_DAPM_OUTPUT("ADC2_OUTPUT"),
> + SND_SOC_DAPM_OUTPUT("ADC3_OUTPUT"),
> + SND_SOC_DAPM_OUTPUT("WCD_TX_OUTPUT"),
> +
> /* RX output widgets */
> SND_SOC_DAPM_OUTPUT("EAR"),
> SND_SOC_DAPM_OUTPUT("AUX"),
> SND_SOC_DAPM_OUTPUT("HPHL"),
> SND_SOC_DAPM_OUTPUT("HPHR"),
> +
> + /* MIC_BIAS pull up widgets */
> + SND_SOC_DAPM_SUPPLY("VA MIC BIAS1", SND_SOC_NOPM, 0, 0,
> + wcd937x_codec_enable_micbias_pullup,
> + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
> + SND_SOC_DAPM_POST_PMD),
> + SND_SOC_DAPM_SUPPLY("VA MIC BIAS2", SND_SOC_NOPM, 0, 0,
> + wcd937x_codec_enable_micbias_pullup,
> + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
> + SND_SOC_DAPM_POST_PMD),
> + SND_SOC_DAPM_SUPPLY("VA MIC BIAS3", SND_SOC_NOPM, 0, 0,
> + wcd937x_codec_enable_micbias_pullup,
> + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
> + SND_SOC_DAPM_POST_PMD),
next prev parent reply other threads:[~2024-06-10 7:05 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-27 11:19 [RESEND v5 0/7] ASoC: codecs: wcd937x: add wcd937x audio codec support Mohammad Rafi Shaik
2024-05-27 11:19 ` [RESEND v5 1/7] ASoC: dt-bindings: document wcd937x Audio Codec Mohammad Rafi Shaik
2024-05-27 11:19 ` [RESEND v5 2/7] ASoC: codecs: wcd937x-sdw: add SoundWire driver Mohammad Rafi Shaik
2024-05-27 11:19 ` [RESEND v5 3/7] ASoC: codecs: wcd937x: add wcd937x codec driver Mohammad Rafi Shaik
2024-05-27 11:19 ` [RESEND v5 4/7] ASoC: codecs: wcd937x: add basic controls Mohammad Rafi Shaik
2024-05-27 11:19 ` [RESEND v5 5/7] ASoC: codecs: wcd937x: add playback dapm widgets Mohammad Rafi Shaik
2024-05-27 11:19 ` [RESEND v5 6/7] ASoC: codecs: wcd937x: add capture " Mohammad Rafi Shaik
2024-06-10 7:05 ` Srinivas Kandagatla [this message]
2024-06-11 4:39 ` Mohammad Rafi Shaik
2024-05-27 11:19 ` [RESEND v5 7/7] ASoC: codecs: wcd937x: add audio routing and Kconfig Mohammad Rafi Shaik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ba911ebd-aef5-46af-ace1-84d13bee6876@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=alsa-devel@alsa-project.org \
--cc=bgoswami@quicinc.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=quic_mohs@quicinc.com \
--cc=quic_pkumpatl@quicinc.com \
--cc=quic_rohkumar@quicinc.com \
--cc=robh@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox