[PATCH v3 0/5] Add interconnect driver for IPQ5332 SoC

[PATCH v3 0/5] Add interconnect driver for IPQ5332 SoC

[Varadarajan Narayanan]

Enable icc-clk based interconnect driver for IPQ5332. This is
similar to IPQ9574's icc-clk based driver.

dt_bindings_check and dtbs_check passed.

Ensured that icc_sync_state is called and relevant clocks are
disabled.

v3: Not taking Reviewed-By: Krzysztof, due to minor change in file

    Add 'clk: qcom: ipq5332: Register gcc_qdss_tsctr_clk_src' to fix
    gpll4_main's CLK_IGNORE_UNUSED issue.

v2: Removed dependency as it is merged
    dt-bindings update to accommodate USB clock names change
    Use icc-clk for USB also

v1:
Dependency:
[1] https://lore.kernel.org/linux-arm-msm/20240430064214.2030013-1-quic_varada@quicinc.com/


Varadarajan Narayanan (5):
  dt-bindings: interconnect: Add Qualcomm IPQ5332 support
  dt-bindings: usb: qcom,dwc3: Update ipq5332 clock details
  clk: qcom: ipq5332: Register gcc_qdss_tsctr_clk_src
  clk: qcom: ipq5332: Use icc-clk for enabling NoC related clocks
  arm64: dts: qcom: ipq5332: Add icc provider ability to gcc

 .../bindings/clock/qcom,ipq5332-gcc.yaml      |  2 +
 .../devicetree/bindings/usb/qcom,dwc3.yaml    | 17 ++++++-
 arch/arm64/boot/dts/qcom/ipq5332.dtsi         |  7 ++-
 drivers/clk/qcom/gcc-ipq5332.c                | 36 ++++++++++-----
 .../dt-bindings/interconnect/qcom,ipq5332.h   | 46 +++++++++++++++++++
 5 files changed, 94 insertions(+), 14 deletions(-)
 create mode 100644 include/dt-bindings/interconnect/qcom,ipq5332.h

-- 
2.34.1

[PATCH v3 1/5] dt-bindings: interconnect: Add Qualcomm IPQ5332 support

[Varadarajan Narayanan]

Add interconnect-cells to clock provider so that it can be
used as icc provider.

Add master/slave ids for Qualcomm IPQ5332 Network-On-Chip
interfaces. This will be used by the gcc-ipq5332 driver
for providing interconnect services using the icc-clk
framework.

Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
v3: Not taking Reviewed-By: Krzysztof, fixed copy paste error
    INTERCONNECT_QCOM_IPQ9574_H -> INTERCONNECT_QCOM_IPQ5332_H
---
 .../bindings/clock/qcom,ipq5332-gcc.yaml      |  2 +
 .../dt-bindings/interconnect/qcom,ipq5332.h   | 46 +++++++++++++++++++
 2 files changed, 48 insertions(+)
 create mode 100644 include/dt-bindings/interconnect/qcom,ipq5332.h

diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
index adc30d84fa8f..9193de681de2 100644
--- a/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
@@ -31,6 +31,8 @@ properties:
       - description: USB PCIE wrapper pipe clock source
 
   '#power-domain-cells': false
+  '#interconnect-cells':
+    const: 1
 
 required:
   - compatible
diff --git a/include/dt-bindings/interconnect/qcom,ipq5332.h b/include/dt-bindings/interconnect/qcom,ipq5332.h
new file mode 100644
index 000000000000..16475bb07a48
--- /dev/null
+++ b/include/dt-bindings/interconnect/qcom,ipq5332.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+#ifndef INTERCONNECT_QCOM_IPQ5332_H
+#define INTERCONNECT_QCOM_IPQ5332_H
+
+#define MASTER_SNOC_PCIE3_1_M		0
+#define SLAVE_SNOC_PCIE3_1_M		1
+#define MASTER_ANOC_PCIE3_1_S		2
+#define SLAVE_ANOC_PCIE3_1_S		3
+#define MASTER_SNOC_PCIE3_2_M		4
+#define SLAVE_SNOC_PCIE3_2_M		5
+#define MASTER_ANOC_PCIE3_2_S		6
+#define SLAVE_ANOC_PCIE3_2_S		7
+#define MASTER_SNOC_USB			8
+#define SLAVE_SNOC_USB			9
+#define MASTER_NSSNOC_NSSCC		10
+#define SLAVE_NSSNOC_NSSCC		11
+#define MASTER_NSSNOC_SNOC_0		12
+#define SLAVE_NSSNOC_SNOC_0		13
+#define MASTER_NSSNOC_SNOC_1		14
+#define SLAVE_NSSNOC_SNOC_1		15
+#define MASTER_NSSNOC_ATB		16
+#define SLAVE_NSSNOC_ATB		17
+#define MASTER_NSSNOC_PCNOC_1		18
+#define SLAVE_NSSNOC_PCNOC_1		19
+#define MASTER_NSSNOC_QOSGEN_REF	20
+#define SLAVE_NSSNOC_QOSGEN_REF		21
+#define MASTER_NSSNOC_TIMEOUT_REF	22
+#define SLAVE_NSSNOC_TIMEOUT_REF	23
+#define MASTER_NSSNOC_XO_DCD		24
+#define SLAVE_NSSNOC_XO_DCD		25
+
+#define MASTER_NSSNOC_PPE		0
+#define SLAVE_NSSNOC_PPE		1
+#define MASTER_NSSNOC_PPE_CFG		2
+#define SLAVE_NSSNOC_PPE_CFG		3
+#define MASTER_NSSNOC_NSS_CSR		4
+#define SLAVE_NSSNOC_NSS_CSR		5
+#define MASTER_NSSNOC_CE_APB		6
+#define SLAVE_NSSNOC_CE_APB		7
+#define MASTER_NSSNOC_CE_AXI		8
+#define SLAVE_NSSNOC_CE_AXI		9
+
+#define MASTER_CNOC_AHB			0
+#define SLAVE_CNOC_AHB			1
+
+#endif /* INTERCONNECT_QCOM_IPQ5332_H */
-- 
2.34.1

[PATCH v3 2/5] dt-bindings: usb: qcom,dwc3: Update ipq5332 clock details

[Varadarajan Narayanan]

USB uses icc-clk framework to enable the NoC interface clock.
Hence the 'iface' clock is removed from the list of clocks.
Update the clock-names list accordingly.

Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 .../devicetree/bindings/usb/qcom,dwc3.yaml      | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index efde47a5b145..6c5f962bbcf9 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -220,6 +220,22 @@ allOf:
             - const: sleep
             - const: mock_utmi
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq5332-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: core
+            - const: sleep
+            - const: mock_utmi
+
   - if:
       properties:
         compatible:
@@ -267,7 +283,6 @@ allOf:
           contains:
             enum:
               - qcom,ipq5018-dwc3
-              - qcom,ipq5332-dwc3
               - qcom,msm8994-dwc3
               - qcom,qcs404-dwc3
     then:
-- 
2.34.1

[PATCH v3 3/5] clk: qcom: ipq5332: Register gcc_qdss_tsctr_clk_src

[Varadarajan Narayanan]

gcc_qdss_tsctr_clk_src (enabled in the boot loaders and dependent
on gpll4_main) was not registered as one of the ipq5332 clocks.
Hence clk_disable_unused() disabled 'gpll4_main' assuming there
were no consumers for 'gpll4_main' resulting in system freeze or
reboots.

After registering gcc_qdss_tsctr_clk_src, CLK_IGNORE_UNUSED can
be removed from gpll4_main.

Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 drivers/clk/qcom/gcc-ipq5332.c | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)

diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
index f98591148a97..237b6a766179 100644
--- a/drivers/clk/qcom/gcc-ipq5332.c
+++ b/drivers/clk/qcom/gcc-ipq5332.c
@@ -126,17 +126,6 @@ static struct clk_alpha_pll gpll4_main = {
 			.parent_data = &gcc_parent_data_xo,
 			.num_parents = 1,
 			.ops = &clk_alpha_pll_stromer_ops,
-			/*
-			 * There are no consumers for this GPLL in kernel yet,
-			 * (will be added soon), so the clock framework
-			 * disables this source. But some of the clocks
-			 * initialized by boot loaders uses this source. So we
-			 * need to keep this clock ON. Add the
-			 * CLK_IGNORE_UNUSED flag so the clock will not be
-			 * disabled. Once the consumer in kernel is added, we
-			 * can get rid of this flag.
-			 */
-			.flags = CLK_IGNORE_UNUSED,
 		},
 	},
 };
@@ -3388,6 +3377,7 @@ static struct clk_regmap *gcc_ipq5332_clocks[] = {
 	[GCC_QDSS_DAP_DIV_CLK_SRC] = &gcc_qdss_dap_div_clk_src.clkr,
 	[GCC_QDSS_ETR_USB_CLK] = &gcc_qdss_etr_usb_clk.clkr,
 	[GCC_QDSS_EUD_AT_CLK] = &gcc_qdss_eud_at_clk.clkr,
+	[GCC_QDSS_TSCTR_CLK_SRC] = &gcc_qdss_tsctr_clk_src.clkr,
 	[GCC_QPIC_AHB_CLK] = &gcc_qpic_ahb_clk.clkr,
 	[GCC_QPIC_CLK] = &gcc_qpic_clk.clkr,
 	[GCC_QPIC_IO_MACRO_CLK] = &gcc_qpic_io_macro_clk.clkr,
-- 
2.34.1

[PATCH v3 4/5] clk: qcom: ipq5332: Use icc-clk for enabling NoC related clocks

[Varadarajan Narayanan]

Use the icc-clk framework to enable few clocks to be able to
create paths and use the peripherals connected on those NoCs.

Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
v3: Not taking Reviewed-by: Konrad as NAK-ed by Dmitry
    Remove CLK_IGNORE_UNUSED -> CLK_IS_CRITICAL change and fix
    that in a separate patch
---

 drivers/clk/qcom/gcc-ipq5332.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
index 237b6a766179..9536b2b7d07c 100644
--- a/drivers/clk/qcom/gcc-ipq5332.c
+++ b/drivers/clk/qcom/gcc-ipq5332.c
@@ -4,12 +4,14 @@
  */
 
 #include <linux/clk-provider.h>
+#include <linux/interconnect-provider.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
 #include <dt-bindings/clock/qcom,ipq5332-gcc.h>
+#include <dt-bindings/interconnect/qcom,ipq5332.h>
 
 #include "clk-alpha-pll.h"
 #include "clk-branch.h"
@@ -3618,6 +3620,24 @@ static const struct qcom_reset_map gcc_ipq5332_resets[] = {
 	[GCC_UNIPHY1_XPCS_ARES] = { 0x16060 },
 };
 
+#define IPQ_APPS_ID			5332	/* some unique value */
+
+static struct qcom_icc_hws_data icc_ipq5332_hws[] = {
+	{ MASTER_SNOC_PCIE3_1_M, SLAVE_SNOC_PCIE3_1_M, GCC_SNOC_PCIE3_1LANE_M_CLK },
+	{ MASTER_ANOC_PCIE3_1_S, SLAVE_ANOC_PCIE3_1_S, GCC_SNOC_PCIE3_1LANE_S_CLK },
+	{ MASTER_SNOC_PCIE3_2_M, SLAVE_SNOC_PCIE3_2_M, GCC_SNOC_PCIE3_2LANE_M_CLK },
+	{ MASTER_ANOC_PCIE3_2_S, SLAVE_ANOC_PCIE3_2_S, GCC_SNOC_PCIE3_2LANE_S_CLK },
+	{ MASTER_SNOC_USB, SLAVE_SNOC_USB, GCC_SNOC_USB_CLK },
+	{ MASTER_NSSNOC_NSSCC, SLAVE_NSSNOC_NSSCC, GCC_NSSNOC_NSSCC_CLK },
+	{ MASTER_NSSNOC_SNOC_0, SLAVE_NSSNOC_SNOC_0, GCC_NSSNOC_SNOC_CLK },
+	{ MASTER_NSSNOC_SNOC_1, SLAVE_NSSNOC_SNOC_1, GCC_NSSNOC_SNOC_1_CLK },
+	{ MASTER_NSSNOC_ATB, SLAVE_NSSNOC_ATB, GCC_NSSNOC_ATB_CLK },
+	{ MASTER_NSSNOC_PCNOC_1, SLAVE_NSSNOC_PCNOC_1, GCC_NSSNOC_PCNOC_1_CLK },
+	{ MASTER_NSSNOC_QOSGEN_REF, SLAVE_NSSNOC_QOSGEN_REF, GCC_NSSNOC_QOSGEN_REF_CLK },
+	{ MASTER_NSSNOC_TIMEOUT_REF, SLAVE_NSSNOC_TIMEOUT_REF, GCC_NSSNOC_TIMEOUT_REF_CLK },
+	{ MASTER_NSSNOC_XO_DCD, SLAVE_NSSNOC_XO_DCD, GCC_NSSNOC_XO_DCD_CLK },
+};
+
 static const struct regmap_config gcc_ipq5332_regmap_config = {
 	.reg_bits = 32,
 	.reg_stride = 4,
@@ -3646,6 +3666,9 @@ static const struct qcom_cc_desc gcc_ipq5332_desc = {
 	.num_resets = ARRAY_SIZE(gcc_ipq5332_resets),
 	.clk_hws = gcc_ipq5332_hws,
 	.num_clk_hws = ARRAY_SIZE(gcc_ipq5332_hws),
+	.icc_hws = icc_ipq5332_hws,
+	.num_icc_hws = ARRAY_SIZE(icc_ipq5332_hws),
+	.icc_first_node_id = IPQ_APPS_ID,
 };
 
 static int gcc_ipq5332_probe(struct platform_device *pdev)
@@ -3664,6 +3687,7 @@ static struct platform_driver gcc_ipq5332_driver = {
 	.driver = {
 		.name = "gcc-ipq5332",
 		.of_match_table = gcc_ipq5332_match_table,
+		.sync_state = icc_sync_state,
 	},
 };
 
-- 
2.34.1

[PATCH v3 5/5] arm64: dts: qcom: ipq5332: Add icc provider ability to gcc

[Varadarajan Narayanan]

IPQ SoCs dont involve RPM in managing NoC related clocks and
there is no NoC scaling. Linux itself handles these clocks.
However, these should not be exposed as just clocks and align
with other Qualcomm SoCs that handle these clocks from a
interconnect provider.

Hence include icc provider capability to the gcc node so that
peripherals can use the interconnect facility to enable these
clocks. Change USB to use the icc-clk framework for the iface
clock.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
v3: Fix #include file order
---
 arch/arm64/boot/dts/qcom/ipq5332.dtsi | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 573656587c0d..7e8f9d578382 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/clock/qcom,apss-ipq.h>
 #include <dt-bindings/clock/qcom,ipq5332-gcc.h>
+#include <dt-bindings/interconnect/qcom,ipq5332.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
@@ -208,6 +209,7 @@ gcc: clock-controller@1800000 {
 			reg = <0x01800000 0x80000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			#interconnect-cells = <1>;
 			clocks = <&xo_board>,
 				 <&sleep_clk>,
 				 <0>,
@@ -327,11 +329,9 @@ usb: usb@8af8800 {
 					  "dm_hs_phy_irq";
 
 			clocks = <&gcc GCC_USB0_MASTER_CLK>,
-				 <&gcc GCC_SNOC_USB_CLK>,
 				 <&gcc GCC_USB0_SLEEP_CLK>,
 				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
 			clock-names = "core",
-				      "iface",
 				      "sleep",
 				      "mock_utmi";
 
@@ -342,6 +342,9 @@ usb: usb@8af8800 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
+			interconnects = <&gcc MASTER_SNOC_USB &gcc SLAVE_SNOC_USB>,
+					<&gcc MASTER_SNOC_USB &gcc SLAVE_SNOC_USB>;
+			interconnect-names = "usb-ddr", "apps-usb";
 
 			status = "disabled";
 
-- 
2.34.1

Re: [PATCH v3 1/5] dt-bindings: interconnect: Add Qualcomm IPQ5332 support

[Krzysztof Kozlowski]

On 22/07/2024 07:55, Varadarajan Narayanan wrote:
> Add interconnect-cells to clock provider so that it can be
> used as icc provider.
> 
> Add master/slave ids for Qualcomm IPQ5332 Network-On-Chip
> interfaces. This will be used by the gcc-ipq5332 driver
> for providing interconnect services using the icc-clk
> framework.
> 
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
> v3: Not taking Reviewed-By: Krzysztof, fixed copy paste error
>     INTERCONNECT_QCOM_IPQ9574_H -> INTERCONNECT_QCOM_IPQ5332_H

Really? You expect re-doing review because of guard typo? The guard name
does not matter. Read submitting patches before posting.

<form letter>
This is a friendly reminder during the review process.

It looks like you received a tag and forgot to add it.

If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions, under or above your Signed-off-by tag. Tag is "received", when
provided in a message replied to you on the mailing list. Tools like b4
can help here. However, there's no need to repost patches *only* to add
the tags. The upstream maintainer will do that for tags received on the
version they apply.

https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577

If a tag was not added on purpose, please state why and what changed.
</form letter>

Best regards,
Krzysztof

Re: [PATCH v3 3/5] clk: qcom: ipq5332: Register gcc_qdss_tsctr_clk_src

[Dmitry Baryshkov]

On Mon, Jul 22, 2024 at 11:25:37AM GMT, Varadarajan Narayanan wrote:
> gcc_qdss_tsctr_clk_src (enabled in the boot loaders and dependent
> on gpll4_main) was not registered as one of the ipq5332 clocks.
> Hence clk_disable_unused() disabled 'gpll4_main' assuming there
> were no consumers for 'gpll4_main' resulting in system freeze or
> reboots.
> 
> After registering gcc_qdss_tsctr_clk_src, CLK_IGNORE_UNUSED can
> be removed from gpll4_main.

Commented below.

> 
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>

Fixes?

> ---
>  drivers/clk/qcom/gcc-ipq5332.c | 12 +-----------
>  1 file changed, 1 insertion(+), 11 deletions(-)
> 
> diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
> index f98591148a97..237b6a766179 100644
> --- a/drivers/clk/qcom/gcc-ipq5332.c
> +++ b/drivers/clk/qcom/gcc-ipq5332.c
> @@ -126,17 +126,6 @@ static struct clk_alpha_pll gpll4_main = {
>  			.parent_data = &gcc_parent_data_xo,
>  			.num_parents = 1,
>  			.ops = &clk_alpha_pll_stromer_ops,
> -			/*
> -			 * There are no consumers for this GPLL in kernel yet,
> -			 * (will be added soon), so the clock framework
> -			 * disables this source. But some of the clocks
> -			 * initialized by boot loaders uses this source. So we
> -			 * need to keep this clock ON. Add the
> -			 * CLK_IGNORE_UNUSED flag so the clock will not be
> -			 * disabled. Once the consumer in kernel is added, we
> -			 * can get rid of this flag.
> -			 */
> -			.flags = CLK_IGNORE_UNUSED,

You can't drop it in this patch, since GPLL4 still can get disabled if
GCC_QDSS_TSCTR_CLK_SRC gets disabled. This chunk should go to the next
patch (or you should reorder the patches).

>  		},
>  	},
>  };
> @@ -3388,6 +3377,7 @@ static struct clk_regmap *gcc_ipq5332_clocks[] = {
>  	[GCC_QDSS_DAP_DIV_CLK_SRC] = &gcc_qdss_dap_div_clk_src.clkr,
>  	[GCC_QDSS_ETR_USB_CLK] = &gcc_qdss_etr_usb_clk.clkr,
>  	[GCC_QDSS_EUD_AT_CLK] = &gcc_qdss_eud_at_clk.clkr,
> +	[GCC_QDSS_TSCTR_CLK_SRC] = &gcc_qdss_tsctr_clk_src.clkr,
>  	[GCC_QPIC_AHB_CLK] = &gcc_qpic_ahb_clk.clkr,
>  	[GCC_QPIC_CLK] = &gcc_qpic_clk.clkr,
>  	[GCC_QPIC_IO_MACRO_CLK] = &gcc_qpic_io_macro_clk.clkr,
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry

Re: [PATCH v3 3/5] clk: qcom: ipq5332: Register gcc_qdss_tsctr_clk_src

[Varadarajan Narayanan]

On Mon, Jul 22, 2024 at 11:24:33AM +0300, Dmitry Baryshkov wrote:
> On Mon, Jul 22, 2024 at 11:25:37AM GMT, Varadarajan Narayanan wrote:
> > gcc_qdss_tsctr_clk_src (enabled in the boot loaders and dependent
> > on gpll4_main) was not registered as one of the ipq5332 clocks.
> > Hence clk_disable_unused() disabled 'gpll4_main' assuming there
> > were no consumers for 'gpll4_main' resulting in system freeze or
> > reboots.
> >
> > After registering gcc_qdss_tsctr_clk_src, CLK_IGNORE_UNUSED can
> > be removed from gpll4_main.
>
> Commented below.
>
> >
> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
>
> Fixes?

Will add that. Was hesitant to add as it would point to the approx
3800 line commit (3d89d52970fd) that introduced the gcc-ipq5332.c file.

> > ---
> >  drivers/clk/qcom/gcc-ipq5332.c | 12 +-----------
> >  1 file changed, 1 insertion(+), 11 deletions(-)
> >
> > diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
> > index f98591148a97..237b6a766179 100644
> > --- a/drivers/clk/qcom/gcc-ipq5332.c
> > +++ b/drivers/clk/qcom/gcc-ipq5332.c
> > @@ -126,17 +126,6 @@ static struct clk_alpha_pll gpll4_main = {
> >  			.parent_data = &gcc_parent_data_xo,
> >  			.num_parents = 1,
> >  			.ops = &clk_alpha_pll_stromer_ops,
> > -			/*
> > -			 * There are no consumers for this GPLL in kernel yet,
> > -			 * (will be added soon), so the clock framework
> > -			 * disables this source. But some of the clocks
> > -			 * initialized by boot loaders uses this source. So we
> > -			 * need to keep this clock ON. Add the
> > -			 * CLK_IGNORE_UNUSED flag so the clock will not be
> > -			 * disabled. Once the consumer in kernel is added, we
> > -			 * can get rid of this flag.
> > -			 */
> > -			.flags = CLK_IGNORE_UNUSED,
>
> You can't drop it in this patch, since GPLL4 still can get disabled if
> GCC_QDSS_TSCTR_CLK_SRC gets disabled. This chunk should go to the next
> patch (or you should reorder the patches).

Ok, will move the above chunk to next patch.

Thanks
Varada

> >  		},
> >  	},
> >  };
> > @@ -3388,6 +3377,7 @@ static struct clk_regmap *gcc_ipq5332_clocks[] = {
> >  	[GCC_QDSS_DAP_DIV_CLK_SRC] = &gcc_qdss_dap_div_clk_src.clkr,
> >  	[GCC_QDSS_ETR_USB_CLK] = &gcc_qdss_etr_usb_clk.clkr,
> >  	[GCC_QDSS_EUD_AT_CLK] = &gcc_qdss_eud_at_clk.clkr,
> > +	[GCC_QDSS_TSCTR_CLK_SRC] = &gcc_qdss_tsctr_clk_src.clkr,
> >  	[GCC_QPIC_AHB_CLK] = &gcc_qpic_ahb_clk.clkr,
> >  	[GCC_QPIC_CLK] = &gcc_qpic_clk.clkr,
> >  	[GCC_QPIC_IO_MACRO_CLK] = &gcc_qpic_io_macro_clk.clkr,
> > --
> > 2.34.1
> >
>
> --
> With best wishes
> Dmitry