Re: [PATCH v2 4/7] PCI: qcom: Add support for IPQ9574

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 4/9/24 21:08, Alexandru Gagniuc wrote:
> Add support for the PCIe on IPQ9574. The main difference from ipq6018
> is that the "iface" clock is not necessarry. Add a special case in
> qcom_pcie_get_resources_2_9_0() to handle this.
> 
> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   drivers/pci/controller/dwc/pcie-qcom.c | 13 +++++++++----
>   1 file changed, 9 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 14772edcf0d3..10560d6d6336 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1101,15 +1101,19 @@ static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie)
>   	struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0;
>   	struct dw_pcie *pci = pcie->pci;
>   	struct device *dev = pci->dev;
> -	int ret;
> +	int ret, num_clks = ARRAY_SIZE(res->clks) - 1;
>   
> -	res->clks[0].id = "iface";
> +	res->clks[0].id = "rchng";
>   	res->clks[1].id = "axi_m";
>   	res->clks[2].id = "axi_s";
>   	res->clks[3].id = "axi_bridge";
> -	res->clks[4].id = "rchng";
>   
> -	ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks);
> +	if (!of_device_is_compatible(dev->of_node, "qcom,pcie-ipq9574")) {
> +		res->clks[4].id = "iface";
> +		num_clks++;

Or use devm_clk_bulk_get_optional and rely on the bindings to sanity-check.

Mani, thoughts?

Konrad