From: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
To: Richard Acayan <mailingradian@gmail.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>, Conor Dooley <conor+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Tianshu Qiu <tian.shu.qiu@intel.com>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-msm@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>,
Robert Mader <robert.mader@collabora.com>,
Bryan O'Donoghue <bod@kernel.org>,
David Heidelberg <david@ixit.cz>,
phone-devel@vger.kernel.org
Subject: Re: [PATCH v6 1/5] dt-bindings: media: i2c: Add Sony IMX355
Date: Wed, 7 Jan 2026 06:41:59 +0200 [thread overview]
Message-ID: <e5c52f0c-a5bb-49d9-a673-9dbaffe3e689@linaro.org> (raw)
In-Reply-To: <20260107043044.92485-2-mailingradian@gmail.com>
On 1/7/26 06:30, Richard Acayan wrote:
> The IMX355 camera sensor is a camera sensor that can be found as the
> front camera in some smartphones, such as the Pixel 3, Pixel 3 XL, Pixel
> 3a, and Pixel 3a XL. It already has a driver, but needs support for
> device tree. Document the IMX355 to support defining it in device tree.
>
> Signed-off-by: Richard Acayan <mailingradian@gmail.com>
> ---
> .../bindings/media/i2c/sony,imx355.yaml | 115 ++++++++++++++++++
> 1 file changed, 115 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx355.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx355.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx355.yaml
> new file mode 100644
> index 000000000000..33d253ca0e4f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx355.yaml
> @@ -0,0 +1,115 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/sony,imx355.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sony IMX355 Sensor
> +
> +maintainers:
> + - Richard Acayan <mailingradian@gmail.com>
> +
> +description:
> + The IMX355 sensor is a 3280x2464 image sensor, commonly found as the front
> + camera in smartphones.
> +
> +allOf:
> + - $ref: /schemas/media/video-interface-devices.yaml#
> +
> +properties:
> + compatible:
> + const: sony,imx355
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + avdd-supply:
> + description: Analog power supply.
> +
> + dvdd-supply:
> + description: Digital power supply.
> +
> + dovdd-supply:
> + description: Interface power supply.
> +
> + reset-gpios:
> + description: Reset GPIO (active low).
> + maxItems: 1
> +
> + port:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + additionalProperties: false
> +
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + items:
> + - const: 1
> + - const: 2
> + - const: 3
> + - const: 4
> +
> + required:
> + - link-frequencies
> +
> + required:
> + - endpoint
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - avdd-supply
> + - dvdd-supply
> + - dovdd-supply
> + - port
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,camcc-sdm845.h>
> + #include <dt-bindings/gpio/gpio.h>
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + camera@1a {
> + compatible = "sony,imx355";
> + reg = <0x1a>;
> +
> + clocks = <&camcc CAM_CC_MCLK2_CLK>;
> +
> + assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
> + assigned-clock-rates = <24000000>;
> +
> + reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
> +
> + avdd-supply = <&cam_front_ldo>;
> + dvdd-supply = <&cam_front_ldo>;
> + dovdd-supply = <&cam_vio_ldo>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&cam_front_default>;
> +
> + rotation = <270>;
> + orientation = <0>;
> +
> + port {
> + cam_front_endpoint: endpoint {
> + data-lanes = <1 2 3 4>;
> + link-frequencies = /bits/ 64 <360000000>;
> + remote-endpoint = <&camss_endpoint1>;
> + };
> + };
> + };
> + };
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
--
Best wishes,
Vladimir
next prev parent reply other threads:[~2026-01-07 4:42 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-07 4:30 [PATCH v6 0/5] media: i2c: IMX355 for the Pixel 3a Richard Acayan
2026-01-07 4:30 ` [PATCH v6 1/5] dt-bindings: media: i2c: Add Sony IMX355 Richard Acayan
2026-01-07 4:41 ` Vladimir Zapolskiy [this message]
2026-01-07 7:35 ` Krzysztof Kozlowski
2026-01-09 0:09 ` Richard Acayan
2026-01-07 4:30 ` [PATCH v6 2/5] media: i2c: imx355: Support devicetree and power management Richard Acayan
2026-01-07 4:55 ` Vladimir Zapolskiy
2026-01-07 7:34 ` Krzysztof Kozlowski
2026-01-08 3:28 ` Richard Acayan
2026-01-07 13:31 ` Bryan O'Donoghue
2026-01-07 18:49 ` Sakari Ailus
2026-01-08 4:15 ` Richard Acayan
2026-01-07 4:30 ` [PATCH v6 3/5] arm64: dts: qcom: sdm670: label the camss ports instead of endpoints Richard Acayan
2026-01-07 4:59 ` Vladimir Zapolskiy
2026-01-07 13:36 ` Bryan O'Donoghue
2026-01-07 4:30 ` [PATCH v6 4/5] arm64: dts: qcom: sdm670: add camera mclk pins Richard Acayan
2026-01-07 4:30 ` [PATCH v6 5/5] arm64: dts: qcom: sdm670-google-sargo: add imx355 front camera Richard Acayan
2026-01-07 5:05 ` Vladimir Zapolskiy
2026-01-07 13:37 ` Bryan O'Donoghue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e5c52f0c-a5bb-49d9-a673-9dbaffe3e689@linaro.org \
--to=vladimir.zapolskiy@linaro.org \
--cc=andersson@kernel.org \
--cc=bod@kernel.org \
--cc=conor+dt@kernel.org \
--cc=david@ixit.cz \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mailingradian@gmail.com \
--cc=mchehab@kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=robert.mader@collabora.com \
--cc=robh@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=tian.shu.qiu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox