* [PATCH] thermal/drivers/qcom/temp-alarm: Use dev_err_probe
@ 2023-06-25 11:11 Luca Weiss
2023-06-26 9:47 ` Konrad Dybcio
2023-06-26 11:20 ` Daniel Lezcano
0 siblings, 2 replies; 3+ messages in thread
From: Luca Weiss @ 2023-06-25 11:11 UTC (permalink / raw)
To: ~postmarketos/upstreaming, phone-devel, Amit Kucheria,
Thara Gopinath, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Rafael J. Wysocki, Daniel Lezcano, Zhang Rui
Cc: linux-arm-msm, linux-pm, linux-kernel, Luca Weiss
Use the dev_err_probe function instead of dev_err in the probe function
so that the printed message includes the return value and also handles
-EPROBE_DEFER nicely.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 34 ++++++++++++-----------------
1 file changed, 14 insertions(+), 20 deletions(-)
diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
index 2a3b3e21260f..0e8ebfcd84c5 100644
--- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
+++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
@@ -411,22 +411,19 @@ static int qpnp_tm_probe(struct platform_device *pdev)
chip->base = res;
ret = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, &type);
- if (ret < 0) {
- dev_err(&pdev->dev, "could not read type\n");
- return ret;
- }
+ if (ret < 0)
+ return dev_err_probe(&pdev->dev, ret,
+ "could not read type\n");
ret = qpnp_tm_read(chip, QPNP_TM_REG_SUBTYPE, &subtype);
- if (ret < 0) {
- dev_err(&pdev->dev, "could not read subtype\n");
- return ret;
- }
+ if (ret < 0)
+ return dev_err_probe(&pdev->dev, ret,
+ "could not read subtype\n");
ret = qpnp_tm_read(chip, QPNP_TM_REG_DIG_MAJOR, &dig_major);
- if (ret < 0) {
- dev_err(&pdev->dev, "could not read dig_major\n");
- return ret;
- }
+ if (ret < 0)
+ return dev_err_probe(&pdev->dev, ret,
+ "could not read dig_major\n");
if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1
&& subtype != QPNP_TM_SUBTYPE_GEN2)) {
@@ -448,16 +445,13 @@ static int qpnp_tm_probe(struct platform_device *pdev)
*/
chip->tz_dev = devm_thermal_of_zone_register(
&pdev->dev, 0, chip, &qpnp_tm_sensor_ops);
- if (IS_ERR(chip->tz_dev)) {
- dev_err(&pdev->dev, "failed to register sensor\n");
- return PTR_ERR(chip->tz_dev);
- }
+ if (IS_ERR(chip->tz_dev))
+ return dev_err_probe(&pdev->dev, PTR_ERR(chip->tz_dev),
+ "failed to register sensor\n");
ret = qpnp_tm_init(chip);
- if (ret < 0) {
- dev_err(&pdev->dev, "init failed\n");
- return ret;
- }
+ if (ret < 0)
+ return dev_err_probe(&pdev->dev, ret, "init failed\n");
devm_thermal_add_hwmon_sysfs(&pdev->dev, chip->tz_dev);
---
base-commit: 8d2be868b42c08290509c60515865f4de24ea704
change-id: 20230625-spmi-temp-alarm-defer-0889b80544e3
Best regards,
--
Luca Weiss <luca@z3ntu.xyz>
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] thermal/drivers/qcom/temp-alarm: Use dev_err_probe
2023-06-25 11:11 [PATCH] thermal/drivers/qcom/temp-alarm: Use dev_err_probe Luca Weiss
@ 2023-06-26 9:47 ` Konrad Dybcio
2023-06-26 11:20 ` Daniel Lezcano
1 sibling, 0 replies; 3+ messages in thread
From: Konrad Dybcio @ 2023-06-26 9:47 UTC (permalink / raw)
To: Luca Weiss, ~postmarketos/upstreaming, phone-devel, Amit Kucheria,
Thara Gopinath, Andy Gross, Bjorn Andersson, Rafael J. Wysocki,
Daniel Lezcano, Zhang Rui
Cc: linux-arm-msm, linux-pm, linux-kernel
On 25.06.2023 13:11, Luca Weiss wrote:
> Use the dev_err_probe function instead of dev_err in the probe function
> so that the printed message includes the return value and also handles
> -EPROBE_DEFER nicely.
>
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 34 ++++++++++++-----------------
> 1 file changed, 14 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
> index 2a3b3e21260f..0e8ebfcd84c5 100644
> --- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
> +++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
> @@ -411,22 +411,19 @@ static int qpnp_tm_probe(struct platform_device *pdev)
> chip->base = res;
>
> ret = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, &type);
> - if (ret < 0) {
> - dev_err(&pdev->dev, "could not read type\n");
> - return ret;
> - }
> + if (ret < 0)
> + return dev_err_probe(&pdev->dev, ret,
> + "could not read type\n");
>
> ret = qpnp_tm_read(chip, QPNP_TM_REG_SUBTYPE, &subtype);
> - if (ret < 0) {
> - dev_err(&pdev->dev, "could not read subtype\n");
> - return ret;
> - }
> + if (ret < 0)
> + return dev_err_probe(&pdev->dev, ret,
> + "could not read subtype\n");
>
> ret = qpnp_tm_read(chip, QPNP_TM_REG_DIG_MAJOR, &dig_major);
> - if (ret < 0) {
> - dev_err(&pdev->dev, "could not read dig_major\n");
> - return ret;
> - }
> + if (ret < 0)
> + return dev_err_probe(&pdev->dev, ret,
> + "could not read dig_major\n");
>
> if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1
> && subtype != QPNP_TM_SUBTYPE_GEN2)) {
> @@ -448,16 +445,13 @@ static int qpnp_tm_probe(struct platform_device *pdev)
> */
> chip->tz_dev = devm_thermal_of_zone_register(
> &pdev->dev, 0, chip, &qpnp_tm_sensor_ops);
> - if (IS_ERR(chip->tz_dev)) {
> - dev_err(&pdev->dev, "failed to register sensor\n");
> - return PTR_ERR(chip->tz_dev);
> - }
> + if (IS_ERR(chip->tz_dev))
> + return dev_err_probe(&pdev->dev, PTR_ERR(chip->tz_dev),
> + "failed to register sensor\n");
>
> ret = qpnp_tm_init(chip);
> - if (ret < 0) {
> - dev_err(&pdev->dev, "init failed\n");
> - return ret;
> - }
> + if (ret < 0)
> + return dev_err_probe(&pdev->dev, ret, "init failed\n");
>
> devm_thermal_add_hwmon_sysfs(&pdev->dev, chip->tz_dev);
>
>
> ---
> base-commit: 8d2be868b42c08290509c60515865f4de24ea704
> change-id: 20230625-spmi-temp-alarm-defer-0889b80544e3
>
> Best regards,
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] thermal/drivers/qcom/temp-alarm: Use dev_err_probe
2023-06-25 11:11 [PATCH] thermal/drivers/qcom/temp-alarm: Use dev_err_probe Luca Weiss
2023-06-26 9:47 ` Konrad Dybcio
@ 2023-06-26 11:20 ` Daniel Lezcano
1 sibling, 0 replies; 3+ messages in thread
From: Daniel Lezcano @ 2023-06-26 11:20 UTC (permalink / raw)
To: Luca Weiss, ~postmarketos/upstreaming, phone-devel, Amit Kucheria,
Thara Gopinath, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Rafael J. Wysocki, Zhang Rui
Cc: linux-arm-msm, linux-pm, linux-kernel
On 25/06/2023 13:11, Luca Weiss wrote:
> Use the dev_err_probe function instead of dev_err in the probe function
> so that the printed message includes the return value and also handles
> -EPROBE_DEFER nicely.
>
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
Applied, thanks
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-06-26 11:20 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-06-25 11:11 [PATCH] thermal/drivers/qcom/temp-alarm: Use dev_err_probe Luca Weiss
2023-06-26 9:47 ` Konrad Dybcio
2023-06-26 11:20 ` Daniel Lezcano
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox