Re: [PATCH v1] dt-bindings: qcom: geni-se: Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml

[Viken Dadhaniya <quic_vdadhani@quicinc.com>]

On 2/21/2025 5:05 PM, Krzysztof Kozlowski wrote:
> On 21/02/2025 09:54, Viken Dadhaniya wrote:
>> The qcom,geni-se.yaml file describes the Qualcomm Universal Peripheral
>> (QUP) wrapper and the common entities required by QUP to run any Serial
>> Engine (SE) as I2C, SPI, UART, or I3C protocol.
>>
>> Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml to better reflect its
>> association with QUP (Qualcomm Universal Peripheral) and the compatible
>> string.
>>
>> Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
>> ---
>>   .../soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml}       | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>   rename Documentation/devicetree/bindings/soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml} (98%)
>>
> 
> That's just churn for no real gain. Not even tested churn.

That's just churn for no real gain.

We made this change based on below plan, we think this will be helpful.

1. Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml. Reason at 2 below.
2. Create qcom,geni-se.yaml with shared properties for SE-protocol (spi, 
i2c, uart) nodes. This will be helpful for the shared schema in the 
ongoing changes 
https://lore.kernel.org/linux-arm-msm/f090d637-1ef1-4967-b5bc-6bfce3d7130e@kernel.org/T/.

Not even tested churn.

Sorry, we realized other SPI drivers also needs to be adjusted too. We 
have validated dt_binding_check for i2c, spi, uart, and geni-se YAML 
files but missed checking make refcheckdocs.

Please let us know if any command/step is missing in further validation, 
that will help us.

> 
> Best regards,
> Krzysztof