Re: [PATCH V5 1/3] firmware: qcom_scm: provide a read-modify-write function

[Trilok Soni <quic_tsoni@quicinc.com>]

On 7/20/2023 12:04 AM, Kathiravan T wrote:
> From: Mukesh Ojha <quic_mojha@quicinc.com>
> 
> It was realized by Srinivas K. that there is a need of read-modify-write
> scm exported function so that it can be used by multiple clients.
> 
> Let's introduce qcom_scm_io_update_field() which masks out the bits and
> write the passed value to that bit-offset.
> 
> Suggested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
> Changes in V5:
> 	- No changes
> 
>   drivers/firmware/qcom_scm.c            | 15 +++++++++++++++
>   include/linux/firmware/qcom/qcom_scm.h |  2 ++
>   2 files changed, 17 insertions(+)
> 
> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> index fde33acd46b7..104d86e49b97 100644
> --- a/drivers/firmware/qcom_scm.c
> +++ b/drivers/firmware/qcom_scm.c
> @@ -407,6 +407,21 @@ int qcom_scm_set_remote_state(u32 state, u32 id)
>   }
>   EXPORT_SYMBOL(qcom_scm_set_remote_state);
>   
> +int qcom_scm_io_update_field(phys_addr_t addr, unsigned int mask, unsigned int val)
> +{
> +	unsigned int old, new;
> +	int ret;
> +
> +	ret = qcom_scm_io_readl(addr, &old);
> +	if (ret)
> +		return ret;
> +
> +	new = (old & ~mask) | (val & mask);
> +
> +	return qcom_scm_io_writel(addr, new);
> +}
> +EXPORT_SYMBOL(qcom_scm_io_update_field);

EXPORT_SYMBO_GPL please.

> +
>   static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
>   {
>   	struct qcom_scm_desc desc = {
> diff --git a/include/linux/firmware/qcom/qcom_scm.h b/include/linux/firmware/qcom/qcom_scm.h
> index 250ea4efb7cb..ca41e4eb33ad 100644
> --- a/include/linux/firmware/qcom/qcom_scm.h
> +++ b/include/linux/firmware/qcom/qcom_scm.h
> @@ -84,6 +84,8 @@ extern bool qcom_scm_pas_supported(u32 peripheral);
>   
>   extern int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
>   extern int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);
> +extern int qcom_scm_io_update_field(phys_addr_t addr, unsigned int mask,
> +				    unsigned int val);
>   
>   extern bool qcom_scm_restore_sec_cfg_available(void);
>   extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);