From: Joel Stanley <joel@jms.id.au>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v3 01/20] dt-bindings: clock: Add ASPEED constants
Date: Wed, 20 Dec 2017 13:53:09 +1030 [thread overview]
Message-ID: <20171220032328.30584-2-joel@jms.id.au> (raw)
In-Reply-To: <20171220032328.30584-1-joel@jms.id.au>
These will be used by the clock driver. This commit is included so
the tree will build without the clock series being applied.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
v3:
- Clarify that the clock defines will be merged as part of the dt
changes, so that the device tree merge will not depend on the clock
tree
v2:
- remove NUM_CLKS define. There's no need for it to be part of ABI
---
include/dt-bindings/clock/aspeed-clock.h | 52 ++++++++++++++++++++++++++++++++
1 file changed, 52 insertions(+)
create mode 100644 include/dt-bindings/clock/aspeed-clock.h
diff --git a/include/dt-bindings/clock/aspeed-clock.h b/include/dt-bindings/clock/aspeed-clock.h
new file mode 100644
index 000000000000..d3558d897a4d
--- /dev/null
+++ b/include/dt-bindings/clock/aspeed-clock.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+#ifndef DT_BINDINGS_ASPEED_CLOCK_H
+#define DT_BINDINGS_ASPEED_CLOCK_H
+
+#define ASPEED_CLK_GATE_ECLK 0
+#define ASPEED_CLK_GATE_GCLK 1
+#define ASPEED_CLK_GATE_MCLK 2
+#define ASPEED_CLK_GATE_VCLK 3
+#define ASPEED_CLK_GATE_BCLK 4
+#define ASPEED_CLK_GATE_DCLK 5
+#define ASPEED_CLK_GATE_REFCLK 6
+#define ASPEED_CLK_GATE_USBPORT2CLK 7
+#define ASPEED_CLK_GATE_LCLK 8
+#define ASPEED_CLK_GATE_USBUHCICLK 9
+#define ASPEED_CLK_GATE_D1CLK 10
+#define ASPEED_CLK_GATE_YCLK 11
+#define ASPEED_CLK_GATE_USBPORT1CLK 12
+#define ASPEED_CLK_GATE_UART1CLK 13
+#define ASPEED_CLK_GATE_UART2CLK 14
+#define ASPEED_CLK_GATE_UART5CLK 15
+#define ASPEED_CLK_GATE_ESPICLK 16
+#define ASPEED_CLK_GATE_MAC1CLK 17
+#define ASPEED_CLK_GATE_MAC2CLK 18
+#define ASPEED_CLK_GATE_RSACLK 19
+#define ASPEED_CLK_GATE_UART3CLK 20
+#define ASPEED_CLK_GATE_UART4CLK 21
+#define ASPEED_CLK_GATE_SDCLKCLK 22
+#define ASPEED_CLK_GATE_LHCCLK 23
+#define ASPEED_CLK_HPLL 24
+#define ASPEED_CLK_AHB 25
+#define ASPEED_CLK_APB 26
+#define ASPEED_CLK_UART 27
+#define ASPEED_CLK_SDIO 28
+#define ASPEED_CLK_ECLK 29
+#define ASPEED_CLK_ECLK_MUX 30
+#define ASPEED_CLK_LHCLK 31
+#define ASPEED_CLK_MAC 32
+#define ASPEED_CLK_BCLK 33
+#define ASPEED_CLK_MPLL 34
+
+#define ASPEED_RESET_XDMA 0
+#define ASPEED_RESET_MCTP 1
+#define ASPEED_RESET_ADC 2
+#define ASPEED_RESET_JTAG_MASTER 3
+#define ASPEED_RESET_MIC 4
+#define ASPEED_RESET_PWM 5
+#define ASPEED_RESET_PCIVGA 6
+#define ASPEED_RESET_I2C 7
+#define ASPEED_RESET_AHB 8
+
+#endif
--
2.15.1
next prev parent reply other threads:[~2017-12-20 3:23 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-20 3:23 [PATCH v3 00/19] ARM: dts: aspeed: updates and new machines Joel Stanley
2017-12-20 3:23 ` Joel Stanley [this message]
2017-12-20 3:23 ` [PATCH v3 02/20] dt-bindings: gpio: Add ASPEED constants Joel Stanley
2017-12-20 21:46 ` Rob Herring
2017-12-20 3:23 ` [PATCH v3 03/20] ARM: dts: aspeed: Add LPC and child devices Joel Stanley
2017-12-20 3:23 ` [PATCH v3 04/20] ARM: dts: aspeed: Add proper clock references Joel Stanley
2017-12-20 3:23 ` [PATCH v3 05/20] ARM: dts: aspeed: Add MAC clocks Joel Stanley
2017-12-20 3:23 ` [PATCH v3 06/20] ARM: dts: aspeed: Add watchdog clocks Joel Stanley
2017-12-20 3:23 ` [PATCH v3 07/20] ARM: dts: aspeed: Add flash controller clocks Joel Stanley
2017-12-20 3:23 ` [PATCH v3 08/20] ARM: dts: aspeed: Add clock phandle to GPIO Joel Stanley
2017-12-20 3:23 ` [PATCH v3 09/20] ARM: dts: aspeed: Add PWM and tachometer node Joel Stanley
2017-12-20 3:23 ` [PATCH v3 10/20] ARM: dts: aspeed: Add LPC Snoop device Joel Stanley
2017-12-20 3:23 ` [PATCH v3 11/20] ARM: dts: aspeed: Remove skeleton.dtsi Joel Stanley
2017-12-20 3:23 ` [PATCH v3 12/20] ARM: dts: aspeed: Update license headers Joel Stanley
2017-12-20 3:23 ` [PATCH v3 13/20] ARM: dts: Add OpenBMC flash layout Joel Stanley
2017-12-20 3:23 ` [PATCH v3 14/20] ARM: dts: aspeed: Sort ASPEED entries in makefile Joel Stanley
2017-12-20 3:23 ` [PATCH v3 15/20] ARM: dts: aspeed: Add Witherspoon BMC machine Joel Stanley
2017-12-20 3:23 ` [PATCH v3 16/20] ARM: dts: aspeed: Add Ingrasys Zaius " Joel Stanley
2017-12-20 3:23 ` [PATCH v3 17/20] ARM: dts: aspeed: Add Qanta Q71L " Joel Stanley
2017-12-20 3:23 ` [PATCH v3 18/20] ARM: dts: aspeed-romulus: Update Romulus system Joel Stanley
2017-12-20 6:44 ` Cédric Le Goater
2017-12-20 3:23 ` [PATCH v3 19/20] ARM: dts: aspeed-plametto: Add flash layout and fix memory node Joel Stanley
2017-12-20 3:23 ` [PATCH v3 20/20] ARM: dts: aspeed-evb: Add unit name to " Joel Stanley
2017-12-20 3:37 ` [PATCH v3 00/19] ARM: dts: aspeed: updates and new machines Joel Stanley
2017-12-20 8:24 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171220032328.30584-2-joel@jms.id.au \
--to=joel@jms.id.au \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox