From: Joel Stanley <joel@jms.id.au>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v3 04/20] ARM: dts: aspeed: Add proper clock references
Date: Wed, 20 Dec 2017 13:53:12 +1030 [thread overview]
Message-ID: <20171220032328.30584-5-joel@jms.id.au> (raw)
In-Reply-To: <20171220032328.30584-1-joel@jms.id.au>
This device tree will break existing kernels that do not have the clk
patches applied (no clocksource, as we don't know the speed of the APB
clock. You can boot if you pass a lpj value on the command line, but
won't have a uart).
Older device trees running with the newer kernel will function as well
as pre-4.16 kernels. That is, that some IP blocks (i2c, pwm/tach, adc)
will not work as the kernel lacks reset controller and clock enabling.
This is being changed as existing device trees use fixed-clocks in order
to boot without a clk driver. The newly added clk driver provides proper
clock support, including gating, so we move the device trees over to
properly request clocks.
The SCU compatible string is updated as the g4-scu string made it into
the tree before we decided on aspeed,astX000-<ip> as the format for the
strings. The old string will be removed from the bindings in a future
patch.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
v3:
- Add reset phandle to ADC node
v2:
- Add more detail to the commit message
adc reset
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 103 ++++++++++++++++----------------------
arch/arm/boot/dts/aspeed-g5.dtsi | 105 ++++++++++++++++-----------------------
2 files changed, 84 insertions(+), 124 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 9422f9cb1e11..b938759f799e 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include "skeleton.dtsi"
+#include <dt-bindings/clock/aspeed-clock.h>
/ {
model = "Aspeed BMC";
@@ -106,47 +107,12 @@
ranges;
syscon: syscon at 1e6e2000 {
- compatible = "aspeed,g4-scu", "syscon", "simple-mfd";
+ compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
reg = <0x1e6e2000 0x1a8>;
#address-cells = <1>;
#size-cells = <0>;
-
- clk_clkin: clk_clkin {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <48000000>;
- };
-
- clk_hpll: clk_hpll at 70 {
- #clock-cells = <0>;
- compatible = "aspeed,g4-hpll-clock", "fixed-clock";
- reg = <0x70>;
- clocks = <&clk_clkin>;
- clock-frequency = <384000000>;
- };
-
- clk_ahb: clk_ahb at 70 {
- #clock-cells = <0>;
- compatible = "aspeed,g4-ahb-clock", "fixed-clock";
- reg = <0x70>;
- clocks = <&clk_hpll>;
- clock-frequency = <192000000>;
- };
-
- clk_apb: clk_apb at 8 {
- #clock-cells = <0>;
- compatible = "aspeed,g4-apb-clock", "fixed-clock";
- reg = <0x08>;
- clocks = <&clk_hpll>;
- clock-frequency = <48000000>;
- };
-
- clk_uart: clk_uart at 2c{
- #clock-cells = <0>;
- compatible = "aspeed,g4-uart-clock", "fixed-clock";
- reg = <0x2c>;
- clock-frequency = <24000000>;
- };
+ #clock-cells = <1>;
+ #reset-cells = <1>;
pinctrl: pinctrl {
compatible = "aspeed,g4-pinctrl";
@@ -156,7 +122,8 @@
adc: adc at 1e6e9000 {
compatible = "aspeed,ast2400-adc";
reg = <0x1e6e9000 0xb0>;
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_ADC>;
#io-channel-cells = <1>;
status = "disabled";
};
@@ -181,7 +148,7 @@
compatible = "aspeed,ast2400-timer";
reg = <0x1e782000 0x90>;
interrupts = <16 17 18 35 36 37 38 39>;
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
clock-names = "PCLK";
};
@@ -190,7 +157,7 @@
reg = <0x1e783000 0x20>;
reg-shift = <2>;
interrupts = <9>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
no-loopback-test;
status = "disabled";
};
@@ -200,7 +167,7 @@
reg = <0x1e784000 0x20>;
reg-shift = <2>;
interrupts = <10>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
no-loopback-test;
status = "disabled";
};
@@ -219,8 +186,8 @@
compatible = "aspeed,ast2400-vuart";
reg = <0x1e787000 0x40>;
reg-shift = <2>;
- interrupts = <10>;
- clocks = <&clk_uart>;
+ interrupts = <8>;
+ clocks = <&syscon ASPEED_CLK_APB>;
no-loopback-test;
status = "disabled";
};
@@ -265,7 +232,7 @@
reg = <0x1e78d000 0x20>;
reg-shift = <2>;
interrupts = <32>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
no-loopback-test;
status = "disabled";
};
@@ -275,7 +242,7 @@
reg = <0x1e78e000 0x20>;
reg-shift = <2>;
interrupts = <33>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
no-loopback-test;
status = "disabled";
};
@@ -285,7 +252,7 @@
reg = <0x1e78f000 0x20>;
reg-shift = <2>;
interrupts = <34>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
no-loopback-test;
status = "disabled";
};
@@ -316,7 +283,8 @@
reg = <0x40 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <0>;
interrupt-parent = <&i2c_ic>;
@@ -331,7 +299,8 @@
reg = <0x80 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <1>;
interrupt-parent = <&i2c_ic>;
@@ -346,7 +315,8 @@
reg = <0xc0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <2>;
interrupt-parent = <&i2c_ic>;
@@ -362,7 +332,8 @@
reg = <0x100 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <3>;
interrupt-parent = <&i2c_ic>;
@@ -378,7 +349,8 @@
reg = <0x140 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <4>;
interrupt-parent = <&i2c_ic>;
@@ -394,7 +366,8 @@
reg = <0x180 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <5>;
interrupt-parent = <&i2c_ic>;
@@ -410,7 +383,8 @@
reg = <0x1c0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <6>;
interrupt-parent = <&i2c_ic>;
@@ -426,7 +400,8 @@
reg = <0x300 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <7>;
interrupt-parent = <&i2c_ic>;
@@ -442,7 +417,8 @@
reg = <0x340 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <8>;
interrupt-parent = <&i2c_ic>;
@@ -458,7 +434,8 @@
reg = <0x380 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <9>;
interrupt-parent = <&i2c_ic>;
@@ -474,7 +451,8 @@
reg = <0x3c0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <10>;
interrupt-parent = <&i2c_ic>;
@@ -490,7 +468,8 @@
reg = <0x400 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <11>;
interrupt-parent = <&i2c_ic>;
@@ -506,7 +485,8 @@
reg = <0x440 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <12>;
interrupt-parent = <&i2c_ic>;
@@ -522,7 +502,8 @@
reg = <0x480 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <13>;
interrupt-parent = <&i2c_ic>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 069f13df19d1..1af600b48475 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include "skeleton.dtsi"
+#include <dt-bindings/clock/aspeed-clock.h>
/ {
model = "Aspeed BMC";
@@ -140,55 +141,18 @@
ranges;
syscon: syscon at 1e6e2000 {
- compatible = "aspeed,g5-scu", "syscon", "simple-mfd";
+ compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
reg = <0x1e6e2000 0x1a8>;
#address-cells = <1>;
#size-cells = <0>;
-
- clk_clkin: clk_clkin at 70 {
- #clock-cells = <0>;
- compatible = "aspeed,g5-clkin-clock", "fixed-clock";
- reg = <0x70>;
- clock-frequency = <24000000>;
- };
-
- clk_hpll: clk_hpll at 24 {
- #clock-cells = <0>;
- compatible = "aspeed,g5-hpll-clock", "fixed-clock";
- reg = <0x24>;
- clocks = <&clk_clkin>;
- clock-frequency = <792000000>;
- };
-
- clk_ahb: clk_ahb at 70 {
- #clock-cells = <0>;
- compatible = "aspeed,g5-ahb-clock", "fixed-clock";
- reg = <0x70>;
- clocks = <&clk_hpll>;
- clock-frequency = <198000000>;
- };
-
- clk_apb: clk_apb at 8 {
- #clock-cells = <0>;
- compatible = "aspeed,g5-apb-clock", "fixed-clock";
- reg = <0x08>;
- clocks = <&clk_hpll>;
- clock-frequency = <24750000>;
- };
-
- clk_uart: clk_uart at 2c {
- #clock-cells = <0>;
- compatible = "aspeed,uart-clock", "fixed-clock";
- reg = <0x2c>;
- clock-frequency = <24000000>;
- };
+ #clock-cells = <1>;
+ #reset-cells = <1>;
pinctrl: pinctrl {
compatible = "aspeed,g5-pinctrl";
aspeed,external-nodes = <&gfx &lhc>;
};
-
};
gfx: display at 1e6e6000 {
@@ -200,7 +164,8 @@
adc: adc at 1e6e9000 {
compatible = "aspeed,ast2500-adc";
reg = <0x1e6e9000 0xb0>;
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_ADC>;
#io-channel-cells = <1>;
status = "disabled";
};
@@ -225,7 +190,7 @@
compatible = "aspeed,ast2400-timer";
reg = <0x1e782000 0x90>;
interrupts = <16 17 18 35 36 37 38 39>;
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
clock-names = "PCLK";
};
@@ -234,7 +199,7 @@
reg = <0x1e783000 0x20>;
reg-shift = <2>;
interrupts = <9>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
no-loopback-test;
status = "disabled";
};
@@ -244,7 +209,7 @@
reg = <0x1e784000 0x20>;
reg-shift = <2>;
interrupts = <10>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
no-loopback-test;
status = "disabled";
};
@@ -269,8 +234,8 @@
compatible = "aspeed,ast2500-vuart";
reg = <0x1e787000 0x40>;
reg-shift = <2>;
- interrupts = <10>;
- clocks = <&clk_uart>;
+ interrupts = <8>;
+ clocks = <&syscon ASPEED_CLK_APB>;
no-loopback-test;
status = "disabled";
};
@@ -317,7 +282,7 @@
reg = <0x1e78d000 0x20>;
reg-shift = <2>;
interrupts = <32>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
no-loopback-test;
status = "disabled";
};
@@ -327,7 +292,7 @@
reg = <0x1e78e000 0x20>;
reg-shift = <2>;
interrupts = <33>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
no-loopback-test;
status = "disabled";
};
@@ -337,7 +302,7 @@
reg = <0x1e78f000 0x20>;
reg-shift = <2>;
interrupts = <34>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
no-loopback-test;
status = "disabled";
};
@@ -368,7 +333,8 @@
reg = <0x40 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <0>;
interrupt-parent = <&i2c_ic>;
@@ -383,7 +349,8 @@
reg = <0x80 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <1>;
interrupt-parent = <&i2c_ic>;
@@ -398,7 +365,8 @@
reg = <0xc0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <2>;
interrupt-parent = <&i2c_ic>;
@@ -414,7 +382,8 @@
reg = <0x100 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <3>;
interrupt-parent = <&i2c_ic>;
@@ -430,7 +399,8 @@
reg = <0x140 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <4>;
interrupt-parent = <&i2c_ic>;
@@ -446,7 +416,8 @@
reg = <0x180 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <5>;
interrupt-parent = <&i2c_ic>;
@@ -462,7 +433,8 @@
reg = <0x1c0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <6>;
interrupt-parent = <&i2c_ic>;
@@ -478,7 +450,8 @@
reg = <0x300 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <7>;
interrupt-parent = <&i2c_ic>;
@@ -494,7 +467,8 @@
reg = <0x340 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <8>;
interrupt-parent = <&i2c_ic>;
@@ -510,7 +484,8 @@
reg = <0x380 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <9>;
interrupt-parent = <&i2c_ic>;
@@ -526,7 +501,8 @@
reg = <0x3c0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <10>;
interrupt-parent = <&i2c_ic>;
@@ -542,7 +518,8 @@
reg = <0x400 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <11>;
interrupt-parent = <&i2c_ic>;
@@ -558,7 +535,8 @@
reg = <0x440 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <12>;
interrupt-parent = <&i2c_ic>;
@@ -574,7 +552,8 @@
reg = <0x480 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <13>;
interrupt-parent = <&i2c_ic>;
--
2.15.1
next prev parent reply other threads:[~2017-12-20 3:23 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-20 3:23 [PATCH v3 00/19] ARM: dts: aspeed: updates and new machines Joel Stanley
2017-12-20 3:23 ` [PATCH v3 01/20] dt-bindings: clock: Add ASPEED constants Joel Stanley
2017-12-20 3:23 ` [PATCH v3 02/20] dt-bindings: gpio: " Joel Stanley
2017-12-20 21:46 ` Rob Herring
2017-12-20 3:23 ` [PATCH v3 03/20] ARM: dts: aspeed: Add LPC and child devices Joel Stanley
2017-12-20 3:23 ` Joel Stanley [this message]
2017-12-20 3:23 ` [PATCH v3 05/20] ARM: dts: aspeed: Add MAC clocks Joel Stanley
2017-12-20 3:23 ` [PATCH v3 06/20] ARM: dts: aspeed: Add watchdog clocks Joel Stanley
2017-12-20 3:23 ` [PATCH v3 07/20] ARM: dts: aspeed: Add flash controller clocks Joel Stanley
2017-12-20 3:23 ` [PATCH v3 08/20] ARM: dts: aspeed: Add clock phandle to GPIO Joel Stanley
2017-12-20 3:23 ` [PATCH v3 09/20] ARM: dts: aspeed: Add PWM and tachometer node Joel Stanley
2017-12-20 3:23 ` [PATCH v3 10/20] ARM: dts: aspeed: Add LPC Snoop device Joel Stanley
2017-12-20 3:23 ` [PATCH v3 11/20] ARM: dts: aspeed: Remove skeleton.dtsi Joel Stanley
2017-12-20 3:23 ` [PATCH v3 12/20] ARM: dts: aspeed: Update license headers Joel Stanley
2017-12-20 3:23 ` [PATCH v3 13/20] ARM: dts: Add OpenBMC flash layout Joel Stanley
2017-12-20 3:23 ` [PATCH v3 14/20] ARM: dts: aspeed: Sort ASPEED entries in makefile Joel Stanley
2017-12-20 3:23 ` [PATCH v3 15/20] ARM: dts: aspeed: Add Witherspoon BMC machine Joel Stanley
2017-12-20 3:23 ` [PATCH v3 16/20] ARM: dts: aspeed: Add Ingrasys Zaius " Joel Stanley
2017-12-20 3:23 ` [PATCH v3 17/20] ARM: dts: aspeed: Add Qanta Q71L " Joel Stanley
2017-12-20 3:23 ` [PATCH v3 18/20] ARM: dts: aspeed-romulus: Update Romulus system Joel Stanley
2017-12-20 6:44 ` Cédric Le Goater
2017-12-20 3:23 ` [PATCH v3 19/20] ARM: dts: aspeed-plametto: Add flash layout and fix memory node Joel Stanley
2017-12-20 3:23 ` [PATCH v3 20/20] ARM: dts: aspeed-evb: Add unit name to " Joel Stanley
2017-12-20 3:37 ` [PATCH v3 00/19] ARM: dts: aspeed: updates and new machines Joel Stanley
2017-12-20 8:24 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171220032328.30584-5-joel@jms.id.au \
--to=joel@jms.id.au \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox