From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v9 14/26] ARM: dts: aspeed: yosemite4: Revise ina233 config for yosemite4 schematic change
Date: Wed, 26 Jun 2024 17:07:30 +0800 [thread overview]
Message-ID: <20240626090744.174351-15-Delphine_CC_Chiu@wiwynn.com> (raw)
In-Reply-To: <20240626090744.174351-1-Delphine_CC_Chiu@wiwynn.com>
Revise ina233 config for yosemite4 schematic change
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 20 ++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 0c7d85ff4360..67e3c787d675 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1034,28 +1034,38 @@ adc at 37 {
};
power-sensor at 40 {
- compatible = "ti,ina230";
+ compatible = "ti,ina233";
reg = <0x40>;
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
};
power-sensor at 41 {
- compatible = "ti,ina230";
+ compatible = "ti,ina233";
reg = <0x41>;
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
};
power-sensor at 42 {
- compatible = "ti,ina230";
+ compatible = "ti,ina233";
reg = <0x42>;
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
};
power-sensor at 43 {
- compatible = "ti,ina230";
+ compatible = "ti,ina233";
reg = <0x43>;
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
};
power-sensor at 44 {
- compatible = "ti,ina230";
+ compatible = "ti,ina233";
reg = <0x44>;
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
};
temperature-sensor at 4e {
--
2.25.1
next prev parent reply other threads:[~2024-06-26 9:07 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-26 9:07 [PATCH v9 00/26] Add i2c-mux and eeprom devices for Meta Yosemite 4 Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 01/26] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 02/26] ARM: dts: aspeed: yosemite4: Enable adc15 Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 03/26] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting Delphine CC Chiu
2024-06-26 13:37 ` Rob Herring
2024-06-26 9:07 ` [PATCH v9 04/26] ARM: dts: aspeed: yosemite4: Enable watchdog2 Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 05/26] ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 06/26] ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic change Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 07/26] ARM: dts: aspeed: yosemite4: Add gpio pca9506 Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 08/26] ARM: dts: aspeed: yosemite4: Remove space for adm1272 compatible Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 09/26] ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555 Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 10/26] ARM: dts: aspeed: yosemite4: Add power sensor for power module reading Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 11/26] ARM: dts: aspeed: yosemite4: Add eeprom for yosemite4 use Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 12/26] ARM: dts: aspeed: yosemite4: Remove temperature sensor for yosemite4 schematic change Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 13/26] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode " Delphine CC Chiu
2024-06-26 9:07 ` Delphine CC Chiu [this message]
2024-06-26 9:07 ` [PATCH v9 15/26] ARM: dts: aspeed: yosemite4: Remove idle state setting for yosemite4 NIC connection Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 16/26] ARM: dts: aspeed: yosemite4: Initialize bmc gpio state Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 17/26] ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 18/26] ARM: dts: aspeed: yosemite4: add mctp config for NIC Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 19/26] ARM: dts: aspeed: yosemite4: support mux to cpld Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 20/26] ARM: dts: aspeed: yosemite4: support medusa board adc sensors Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 21/26] ARM: dts: aspeed: yosemite4: support NIC eeprom Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 22/26] ARM: dts: aspeed: yosemite4: Revise i2c duty-cycle Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 23/26] ARM: dts: aspeed: yosemite4: add fan led config Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 24/26] ARM: dts: aspeed: yosemite4: add XDP710 Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 25/26] ARM: dts: aspeed: yosemite4: add RTQ6056 support Delphine CC Chiu
2024-06-26 9:07 ` [PATCH v9 26/26] ARM: dts: aspeed: yosemite4: add MP5990 support Delphine CC Chiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240626090744.174351-15-Delphine_CC_Chiu@wiwynn.com \
--to=delphine_cc_chiu@wiwynn.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox