Linux-Aspeed Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v9 18/26] ARM: dts: aspeed: yosemite4: add mctp config for NIC
Date: Wed, 26 Jun 2024 17:07:34 +0800	[thread overview]
Message-ID: <20240626090744.174351-19-Delphine_CC_Chiu@wiwynn.com> (raw)
In-Reply-To: <20240626090744.174351-1-Delphine_CC_Chiu@wiwynn.com>

add mctp config for NIC

Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 59615a6958ec..83c9d76f5a11 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1281,40 +1281,64 @@ imux24: i2c at 0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+			mctp-controller;
 			temperature-sensor at 1f {
 				compatible = "ti,tmp421";
 				reg = <0x1f>;
 			};
+
+			temperature-sensor at 3c {
+				compatible = "smsc,emc1403";
+				reg = <0x3c>;
+			};
 		};
 
 		imux25: i2c at 1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
+			mctp-controller;
 			temperature-sensor at 1f {
 				compatible = "ti,tmp421";
 				reg = <0x1f>;
 			};
+
+			temperature-sensor at 3c {
+				compatible = "smsc,emc1403";
+				reg = <0x3c>;
+			};
 		};
 
 		imux26: i2c at 2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
+			mctp-controller;
 			temperature-sensor at 1f {
 				compatible = "ti,tmp421";
 				reg = <0x1f>;
 			};
+
+			temperature-sensor at 3c {
+				compatible = "smsc,emc1403";
+				reg = <0x3c>;
+			};
 		};
 
 		imux27: i2c at 3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
+			mctp-controller;
 			temperature-sensor at 1f {
 				compatible = "ti,tmp421";
 				reg = <0x1f>;
 			};
+
+			temperature-sensor at 3c {
+				compatible = "smsc,emc1403";
+				reg = <0x3c>;
+			};
 		};
 	};
 };
-- 
2.25.1


  parent reply	other threads:[~2024-06-26  9:07 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-26  9:07 [PATCH v9 00/26] Add i2c-mux and eeprom devices for Meta Yosemite 4 Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 01/26] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 02/26] ARM: dts: aspeed: yosemite4: Enable adc15 Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 03/26] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting Delphine CC Chiu
2024-06-26 13:37   ` Rob Herring
2024-06-26  9:07 ` [PATCH v9 04/26] ARM: dts: aspeed: yosemite4: Enable watchdog2 Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 05/26] ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 06/26] ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic change Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 07/26] ARM: dts: aspeed: yosemite4: Add gpio pca9506 Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 08/26] ARM: dts: aspeed: yosemite4: Remove space for adm1272 compatible Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 09/26] ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555 Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 10/26] ARM: dts: aspeed: yosemite4: Add power sensor for power module reading Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 11/26] ARM: dts: aspeed: yosemite4: Add eeprom for yosemite4 use Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 12/26] ARM: dts: aspeed: yosemite4: Remove temperature sensor for yosemite4 schematic change Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 13/26] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode " Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 14/26] ARM: dts: aspeed: yosemite4: Revise ina233 config " Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 15/26] ARM: dts: aspeed: yosemite4: Remove idle state setting for yosemite4 NIC connection Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 16/26] ARM: dts: aspeed: yosemite4: Initialize bmc gpio state Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 17/26] ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config Delphine CC Chiu
2024-06-26  9:07 ` Delphine CC Chiu [this message]
2024-06-26  9:07 ` [PATCH v9 19/26] ARM: dts: aspeed: yosemite4: support mux to cpld Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 20/26] ARM: dts: aspeed: yosemite4: support medusa board adc sensors Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 21/26] ARM: dts: aspeed: yosemite4: support NIC eeprom Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 22/26] ARM: dts: aspeed: yosemite4: Revise i2c duty-cycle Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 23/26] ARM: dts: aspeed: yosemite4: add fan led config Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 24/26] ARM: dts: aspeed: yosemite4: add XDP710 Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 25/26] ARM: dts: aspeed: yosemite4: add RTQ6056 support Delphine CC Chiu
2024-06-26  9:07 ` [PATCH v9 26/26] ARM: dts: aspeed: yosemite4: add MP5990 support Delphine CC Chiu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240626090744.174351-19-Delphine_CC_Chiu@wiwynn.com \
    --to=delphine_cc_chiu@wiwynn.com \
    --cc=linux-aspeed@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox