From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v1 2/8] ARM: dts: aspeed: yosemite4: Add i2c-mux for four NICs
Date: Mon, 30 Sep 2024 15:04:53 +0800 [thread overview]
Message-ID: <20240930070500.3174431-3-Delphine_CC_Chiu@wiwynn.com> (raw)
In-Reply-To: <20240930070500.3174431-1-Delphine_CC_Chiu@wiwynn.com>
From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Add i2c-mux on Spider board for four NICs and add the temperature sensor
and EEPROM for the NICs.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 75 ++++++++++++++++++-
1 file changed, 72 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index dbc992a625b7..b813140b3c5b 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -26,6 +26,10 @@ aliases {
i2c21 = &imux21;
i2c22 = &imux22;
i2c23 = &imux23;
+ i2c24 = &imux24;
+ i2c25 = &imux25;
+ i2c26 = &imux26;
+ i2c27 = &imux27;
i2c34 = &imux34;
i2c35 = &imux35;
};
@@ -1196,8 +1200,9 @@ adc at 35 {
};
&i2c15 {
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
- mctp-controller;
multi-master;
bus-frequency = <400000>;
@@ -1208,9 +1213,73 @@ mctp at 10 {
i2c-mux at 72 {
compatible = "nxp,pca9544";
- idle-state = <0>;
- i2c-mux-idle-disconnect;
reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imux24: i2c at 0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mctp-controller;
+ temperature-sensor at 1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ imux25: i2c at 1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mctp-controller;
+ temperature-sensor at 1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ imux26: i2c at 2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mctp-controller;
+ temperature-sensor at 1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ imux27: i2c at 3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mctp-controller;
+ temperature-sensor at 1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
};
};
--
2.25.1
next prev parent reply other threads:[~2024-09-30 7:04 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-30 7:04 [PATCH v1 0/8] Add I2C mux devices for yosemite4 Delphine CC Chiu
2024-09-30 7:04 ` [PATCH v1 1/8] ARM: dts: aspeed: yosemite4: add i2c-mux for all Server Board slots Delphine CC Chiu
2024-09-30 7:04 ` Delphine CC Chiu [this message]
2024-10-01 0:37 ` [PATCH v1 2/8] ARM: dts: aspeed: yosemite4: Add i2c-mux for four NICs Andrew Jeffery
2024-10-01 7:52 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2024-10-02 1:47 ` Andrew Jeffery
2024-10-03 7:42 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2024-09-30 7:04 ` [PATCH v1 3/8] ARM: dts: aspeed: yosemite4: Add i2c-mux for CPLD IOE on Spider Board Delphine CC Chiu
2024-09-30 7:04 ` [PATCH v1 4/8] ARM: dts: aspeed: yosemite4: Revise address of i2c-mux for two fan boards Delphine CC Chiu
2024-10-01 0:39 ` Andrew Jeffery
2024-10-01 7:45 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2024-09-30 7:04 ` [PATCH v1 5/8] ARM: dts: aspeed: yosemite4: correct the compatible string for max31790 Delphine CC Chiu
2024-09-30 7:04 ` [PATCH v1 6/8] ARM: dts: aspeed: yosemite4: Change the address of Fan IC on fan boards Delphine CC Chiu
2024-09-30 7:04 ` [PATCH v1 7/8] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode on Fan Boards Delphine CC Chiu
2024-09-30 7:04 ` [PATCH v1 8/8] ARM: dts: aspeed: yosemite4: Add i2c-mux for ADC monitor on Spider Board Delphine CC Chiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240930070500.3174431-3-Delphine_CC_Chiu@wiwynn.com \
--to=delphine_cc_chiu@wiwynn.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox