Linux-Aspeed Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v1 3/8] ARM: dts: aspeed: yosemite4: Add i2c-mux for CPLD IOE on Spider Board
Date: Mon, 30 Sep 2024 15:04:54 +0800	[thread overview]
Message-ID: <20240930070500.3174431-4-Delphine_CC_Chiu@wiwynn.com> (raw)
In-Reply-To: <20240930070500.3174431-1-Delphine_CC_Chiu@wiwynn.com>

From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>

Add I2C mux for CPLD IOE on Spider Board.

Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 66 +++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index b813140b3c5b..26e0fcbed8d2 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -30,6 +30,8 @@ aliases {
 		i2c25 = &imux25;
 		i2c26 = &imux26;
 		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
 		i2c34 = &imux34;
 		i2c35 = &imux35;
 	};
@@ -773,8 +775,72 @@ eeprom at 54 {
 };
 
 &i2c10 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 	bus-frequency = <400000>;
+	i2c-mux at 74 {
+		compatible = "nxp,pca9544";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux28: i2c at 0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio at 20 {
+				compatible = "nxp,pca9506";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio at 21 {
+				compatible = "nxp,pca9506";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio at 22 {
+				compatible = "nxp,pca9506";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio at 23 {
+				compatible = "nxp,pca9506";
+				reg = <0x23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio at 24 {
+				compatible = "nxp,pca9506";
+				reg = <0x24>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names = "","","","",
+						  "NIC0_MAIN_PWR_EN",
+						  "NIC1_MAIN_PWR_EN",
+						  "NIC2_MAIN_PWR_EN",
+						  "NIC3_MAIN_PWR_EN",
+						  "","","","","","","","",
+						  "","","","","","","","",
+						  "","","","","","","","";
+			};
+		};
+
+		imux29: i2c at 1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
 };
 
 &i2c11 {
-- 
2.25.1


  parent reply	other threads:[~2024-09-30  7:04 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-30  7:04 [PATCH v1 0/8] Add I2C mux devices for yosemite4 Delphine CC Chiu
2024-09-30  7:04 ` [PATCH v1 1/8] ARM: dts: aspeed: yosemite4: add i2c-mux for all Server Board slots Delphine CC Chiu
2024-09-30  7:04 ` [PATCH v1 2/8] ARM: dts: aspeed: yosemite4: Add i2c-mux for four NICs Delphine CC Chiu
2024-10-01  0:37   ` Andrew Jeffery
2024-10-01  7:52     ` Delphine_CC_Chiu/WYHQ/Wiwynn
2024-10-02  1:47       ` Andrew Jeffery
2024-10-03  7:42         ` Delphine_CC_Chiu/WYHQ/Wiwynn
2024-09-30  7:04 ` Delphine CC Chiu [this message]
2024-09-30  7:04 ` [PATCH v1 4/8] ARM: dts: aspeed: yosemite4: Revise address of i2c-mux for two fan boards Delphine CC Chiu
2024-10-01  0:39   ` Andrew Jeffery
2024-10-01  7:45     ` Delphine_CC_Chiu/WYHQ/Wiwynn
2024-09-30  7:04 ` [PATCH v1 5/8] ARM: dts: aspeed: yosemite4: correct the compatible string for max31790 Delphine CC Chiu
2024-09-30  7:04 ` [PATCH v1 6/8] ARM: dts: aspeed: yosemite4: Change the address of Fan IC on fan boards Delphine CC Chiu
2024-09-30  7:04 ` [PATCH v1 7/8] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode on Fan Boards Delphine CC Chiu
2024-09-30  7:04 ` [PATCH v1 8/8] ARM: dts: aspeed: yosemite4: Add i2c-mux for ADC monitor on Spider Board Delphine CC Chiu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240930070500.3174431-4-Delphine_CC_Chiu@wiwynn.com \
    --to=delphine_cc_chiu@wiwynn.com \
    --cc=linux-aspeed@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox