the format string of printf to print audit status is wrong

the format string of printf to print audit status is wrong

[Yu Zhiguo]

Hello Steve,

  all audit status's type is __u32, so '%u' should be used
in format string of printf rather than '%d', otherwise the
value outputted to user will be wraparound.

  For example:
  # auditctl -r 4294967295
  AUDIT_STATUS: enabled=1 flag=1 pid=8999 rate_limit=-1 backlog_limit=320 
lost=2241 backlog=0

but it should be
  # auditctl -r 4294967295
  AUDIT_STATUS: enabled=1 flag=1 pid=8999 rate_limit=4294967295 
backlog_limit=320 lost=2270 backlog=0


  This is the patch. Can you apply it?

Signed-off-by: Yu Zhiguo<yuzg@cn.fujitsu.com>
---
  src/auditctl.c |    4 ++--
  1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/auditctl.c b/src/auditctl.c
index d740509..5416e9b 100644
--- a/src/auditctl.c
+++ b/src/auditctl.c
@@ -1349,8 +1349,8 @@ static int audit_print_reply(struct audit_reply *rep)
  			printed = 1;
  			return 0;
  		case AUDIT_GET:
-			printf("AUDIT_STATUS: enabled=%d flag=%d pid=%d"
-			" rate_limit=%d backlog_limit=%d lost=%d backlog=%d\n",
+			printf("AUDIT_STATUS: enabled=%u flag=%u pid=%u"
+			" rate_limit=%u backlog_limit=%u lost=%u backlog=%u\n",
  			rep->status->enabled, rep->status->failure,
  			rep->status->pid, rep->status->rate_limit,
  			rep->status->backlog_limit, rep->status->lost,

Re: the format string of printf to print audit status is wrong

[Eric Paris]

On Thu, 2008-07-31 at 13:07 +0800, Yu Zhiguo wrote:
> Hello Steve,
> 
>   all audit status's type is __u32, so '%u' should be used
> in format string of printf rather than '%d', otherwise the
> value outputted to user will be wraparound.
> 
>   For example:
>   # auditctl -r 4294967295
>   AUDIT_STATUS: enabled=1 flag=1 pid=8999 rate_limit=-1 backlog_limit=320 
> lost=2241 backlog=0
> 
> but it should be
>   # auditctl -r 4294967295
>   AUDIT_STATUS: enabled=1 flag=1 pid=8999 rate_limit=4294967295 
> backlog_limit=320 lost=2270 backlog=0
> 
> 
>   This is the patch. Can you apply it?
> 
> Signed-off-by: Yu Zhiguo<yuzg@cn.fujitsu.com>
> ---
>   src/auditctl.c |    4 ++--
>   1 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/src/auditctl.c b/src/auditctl.c
> index d740509..5416e9b 100644
> --- a/src/auditctl.c
> +++ b/src/auditctl.c
> @@ -1349,8 +1349,8 @@ static int audit_print_reply(struct audit_reply *rep)
>   			printed = 1;
>   			return 0;
>   		case AUDIT_GET:
> -			printf("AUDIT_STATUS: enabled=%d flag=%d pid=%d"
> -			" rate_limit=%d backlog_limit=%d lost=%d backlog=%d\n",
> +			printf("AUDIT_STATUS: enabled=%u flag=%u pid=%u"
> +			" rate_limit=%u backlog_limit=%u lost=%u backlog=%u\n",

In kernel the types are:
int             audit_enabled;
static int      audit_failure = AUDIT_FAIL_PRINTK;
typedef int     __kernel_pid_t;
static int      audit_rate_limit;
static int      audit_backlog_limit = 64;
static atomic_t audit_lost = ATOMIC_INIT(0);    (atomic_t is just volatile int)

backlog comes from:
static inline __u32 skb_queue_len()


So it seems reasonable to switch backlog=%d to backlog=%u but all of the
other values "could" be negative and should be shown as ints.

-Eric

Re: the format string of printf to print audit status is wrong

[Yu Zhiguo]

Hello Eric,
CC Steve,

Eric Paris wrote:
> So it seems reasonable to switch backlog=%d to backlog=%u but all of the
> other values "could" be negative and should be shown as ints.
> 

 Thanks for your kindness remind.
 I also think all of the other values "could" be negative and should
be shown as ints.

 A new patch for auditctl:

---
 src/auditctl.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/src/auditctl.c b/src/auditctl.c
index d740509..44ca038 100644
--- a/src/auditctl.c
+++ b/src/auditctl.c
@@ -1350,7 +1350,7 @@ static int audit_print_reply(struct audit_reply *rep)
 			return 0;
 		case AUDIT_GET:
 			printf("AUDIT_STATUS: enabled=%d flag=%d pid=%d"
-			" rate_limit=%d backlog_limit=%d lost=%d backlog=%d\n",
+			" rate_limit=%d backlog_limit=%d lost=%d backlog=%u\n",
 			rep->status->enabled, rep->status->failure,
 			rep->status->pid, rep->status->rate_limit,
 			rep->status->backlog_limit, rep->status->lost,

Re: the format string of printf to print audit status is wrong

[Steve Grubb]

On Thursday 31 July 2008 09:07:30 Eric Paris wrote:
> So it seems reasonable to switch backlog=%d to backlog=%u but all of the
> other values "could" be negative and should be shown as ints.

Good point. I updated the patch.

-Steve

Re: the format string of printf to print audit status is wrong

[Steve Grubb]

On Thursday 31 July 2008 01:07:48 Yu Zhiguo wrote:
>   all audit status's type is __u32, so '%u' should be used
> in format string of printf rather than '%d', otherwise the
> value outputted to user will be wraparound.
>
>   This is the patch. Can you apply it?

Applied.  Thanks!

-Steve