Linux block layer
 help / color / mirror / Atom feed
From: Stefan Haberland <sth@linux.ibm.com>
To: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org,
	Jan Hoeppner <hoeppner@linux.ibm.com>,
	linux-s390@vger.kernel.org, Heiko Carstens <hca@linux.ibm.com>,
	Vasily Gorbik <gor@linux.ibm.com>,
	Christian Borntraeger <borntraeger@de.ibm.com>
Subject: [PATCH 17/19] s390/dasd: Report ESE capability and format mode at device online
Date: Wed,  5 Aug 2026 13:16:10 +0200	[thread overview]
Message-ID: <20260805111612.1285190-18-sth@linux.ibm.com> (raw)
In-Reply-To: <20260805111612.1285190-1-sth@linux.ibm.com>

Extend the device information line logged when a volume comes online with
the ESE hardware capability and the on-disk format mode. The format mode
(full or on demand) is derived from the on-disk format label alone, so a
volume that is not backed by ESE hardware but was still formatted on
demand is reported correctly.

Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
---
 drivers/s390/block/dasd_eckd.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index d5854ed0076e..3c4fcfb1558d 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -2523,6 +2523,7 @@ static int dasd_eckd_end_analysis(struct dasd_block *block)
 	struct dasd_device *device = block->base;
 	struct dasd_eckd_private *private = device->private;
 	struct eckd_count *count_area;
+	const char *ese_str, *fmt_str;
 	unsigned int sb, blk_per_trk;
 	int status, i;
 	struct dasd_ccw_req *init_cqr;
@@ -2609,15 +2610,29 @@ static int dasd_eckd_end_analysis(struct dasd_block *block)
 			  private->rdc_data.trk_per_cyl *
 			  blk_per_trk);
 
+	/*
+	 * Report the ESE hardware capability and the format mode. The mode
+	 * comes from dasd_eckd_on_demand_format() (the on-disk label, or the
+	 * ESE state when no label is present), matching the on_demand_formatting
+	 * sysfs attribute.
+	 */
+	ese_str = dasd_eckd_ese_capable(device) ? ", ESE" : "";
+	fmt_str = "";
+	if (dasd_eckd_on_demand_format(device))
+		fmt_str = ", on-demand format";
+	else if (dasd_eckd_ese_capable(device))
+		fmt_str = ", full format";
+
 	dev_info(&device->cdev->dev,
-		 "DASD with %u KB/block, %lu KB total size, %u KB/track, "
-		 "%s\n", (block->bp_block >> 10),
+		 "DASD with %u KB/block, %lu KB total size, %u KB/track, %s%s%s\n",
+		 (block->bp_block >> 10),
 		 (((unsigned long) private->real_cyl *
 		   private->rdc_data.trk_per_cyl *
 		   blk_per_trk * (block->bp_block >> 9)) >> 1),
 		 ((blk_per_trk * block->bp_block) >> 10),
 		 private->uses_cdl ?
-		 "compatible disk layout" : "linux disk layout");
+		 "compatible disk layout" : "linux disk layout",
+		 ese_str, fmt_str);
 
 	return 0;
 }
-- 
2.53.0


  parent reply	other threads:[~2026-08-05 11:16 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-05 11:15 [PATCH 00/19] s390/dasd: ESE Performance improvements Stefan Haberland
2026-08-05 11:15 ` [PATCH 01/19] s390/dasd: Do not complete a failed ESE read as successful Stefan Haberland
2026-08-05 11:15 ` [PATCH 02/19] s390/dasd: Propagate partial completion length across ERP recovery Stefan Haberland
2026-08-05 11:15 ` [PATCH 03/19] s390/dasd: Guard sysfs discipline callbacks against unallocated private data Stefan Haberland
2026-08-05 11:15 ` [PATCH 04/19] s390/dasd: Snapshot intrc before freeing the request block Stefan Haberland
2026-08-05 11:15 ` [PATCH 05/19] s390/dasd: Optimize max blocks per request for track alignment Stefan Haberland
2026-08-05 11:15 ` [PATCH 06/19] s390/dasd: Use GFP_KERNEL in dasd_alloc_device() Stefan Haberland
2026-08-05 11:16 ` [PATCH 07/19] s390/dasd: Add defines for the Extended Address Volume track address Stefan Haberland
2026-08-05 11:16 ` [PATCH 08/19] s390/dasd: Add infrastructure for ESE full-track write Stefan Haberland
2026-08-05 11:16 ` [PATCH 09/19] s390/dasd: Add range-based format-track collision detection Stefan Haberland
2026-08-05 11:16 ` [PATCH 10/19] s390/dasd: Extend prepare_itcw() to support WRITE_FULL_TRACK Stefan Haberland
2026-08-05 11:16 ` [PATCH 11/19] s390/dasd: Add dasd_eckd_build_cp_tpm_writefulltrack() Stefan Haberland
2026-08-05 11:16 ` [PATCH 12/19] s390/dasd: Use WRITE_FULL_TRACK in ESE format handler Stefan Haberland
2026-08-05 11:16 ` [PATCH 13/19] s390/dasd: Add full_track_bias to control fulltrack write mode Stefan Haberland
2026-08-05 11:16 ` [PATCH 14/19] s390/dasd: Derive adaptive ESE fulltrack heuristic from ft_bias Stefan Haberland
2026-08-05 11:16 ` [PATCH 15/19] s390/dasd: Stamp a format label into newly formatted volumes Stefan Haberland
2026-08-05 11:16 ` [PATCH 16/19] s390/dasd: Detect ESE volumes from the on-disk format label Stefan Haberland
2026-08-05 11:16 ` Stefan Haberland [this message]
2026-08-05 11:16 ` [PATCH 18/19] s390/dasd: Re-enable discard support for ESE volumes Stefan Haberland
2026-08-05 11:16 ` [PATCH 19/19] s390/dasd: Read cached unit address and LSS in the CCW build path Stefan Haberland
2026-08-05 12:32 ` [PATCH 00/19] s390/dasd: ESE Performance improvements Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260805111612.1285190-18-sth@linux.ibm.com \
    --to=sth@linux.ibm.com \
    --cc=axboe@kernel.dk \
    --cc=borntraeger@de.ibm.com \
    --cc=gor@linux.ibm.com \
    --cc=hca@linux.ibm.com \
    --cc=hoeppner@linux.ibm.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-s390@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox