Linux block layer
 help / color / mirror / Atom feed
From: Damien Le Moal <dlemoal@kernel.org>
To: Jens Axboe <axboe@kernel.dk>, linux-block@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>
Subject: [PATCH v2 10/13] block: fail zone management operations to read-only and offline zones
Date: Fri,  7 Aug 2026 01:04:42 +0900	[thread overview]
Message-ID: <20260806160445.848337-11-dlemoal@kernel.org> (raw)
In-Reply-To: <20260806160445.848337-1-dlemoal@kernel.org>

Any zone management operation targeting a zone that is in the read-only
or offline condition will fail. So there is no point in issuing such
BIO. Modify the check in submit_bio_noacct() to use the new helper
function bdev_check_zone_mgmt() to check that a zone is sequential (as was
checked before) and also that the zone is not offline nor read-only.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
---
 block/blk-core.c  |  7 +++++--
 block/blk-zoned.c | 24 ++++++++++++++++++++++++
 block/blk.h       |  6 ++++++
 3 files changed, 35 insertions(+), 2 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c
index 196bccf27f58..80a4e2bcc3f3 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -901,8 +901,11 @@ void submit_bio_noacct(struct bio *bio)
 	case REQ_OP_ZONE_CLOSE:
 	case REQ_OP_ZONE_RESET:
 	case REQ_OP_ZONE_FINISH:
-		/* Zone management operations require sequential zones. */
-		if (!bdev_zone_is_seq(bio->bi_bdev, bio->bi_iter.bi_sector))
+		/*
+		 * Zone management operations require sequential zones that are
+		 * not offline nor read-only.
+		 */
+		if (!bdev_check_zone_mgmt(bdev, bio->bi_iter.bi_sector))
 			goto end_io;
 		break;
 	case REQ_OP_ZONE_RESET_ALL:
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index 0f0ffe832008..d13a6edc7362 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -323,6 +323,30 @@ bool bdev_zone_is_seq(struct block_device *bdev, sector_t sector)
 }
 EXPORT_SYMBOL_GPL(bdev_zone_is_seq);
 
+/**
+ * bdev_check_zone_mgmt - check if a sector belongs to a valid sequential zone
+ * @bdev:       block device to check
+ * @sector:     sector number
+ *
+ * Check if @sector on @bdev is contained in a sequential write required zone
+ * that is not offline nor read-only.
+ */
+bool bdev_check_zone_mgmt(struct block_device *bdev, sector_t sector)
+{
+	enum blk_zone_cond cond;
+	u8 zs;
+
+	if (!bdev_is_zoned(bdev))
+		return false;
+
+	zs = disk_zone_get_state(bdev->bd_disk, sector);
+	if (blk_zstate_is_conv(zs))
+		return false;
+
+	cond = blk_zstate_to_zone_cond(zs);
+	return !disk_zone_cond_is_offline_or_readonly(cond);
+}
+
 /*
  * Zone report arguments for block device drivers report_zones operation.
  * @cb: report_zones_cb callback for each reported zone.
diff --git a/block/blk.h b/block/blk.h
index 50abfd932886..cfe8d4185e25 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -577,6 +577,7 @@ int blkdev_report_zones_ioctl(struct block_device *bdev, unsigned int cmd,
 		unsigned long arg);
 int blkdev_zone_mgmt_ioctl(struct block_device *bdev, blk_mode_t mode,
 		unsigned int cmd, unsigned long arg);
+bool bdev_check_zone_mgmt(struct block_device *bdev, sector_t sector);
 #else /* CONFIG_BLK_DEV_ZONED */
 static inline void disk_init_zone_resources(struct gendisk *disk)
 {
@@ -619,6 +620,11 @@ static inline int blkdev_zone_mgmt_ioctl(struct block_device *bdev,
 {
 	return -ENOTTY;
 }
+static inline bool bdev_check_zone_mgmt(struct block_device *bdev,
+					sector_t sector)
+{
+	return false;
+}
 #endif /* CONFIG_BLK_DEV_ZONED */
 
 struct block_device *bdev_alloc(struct gendisk *disk, u8 partno);
-- 
2.55.0


  parent reply	other threads:[~2026-08-06 16:05 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-06 16:04 [PATCH v2 00/13] Improve handling of offline and read-only zones Damien Le Moal
2026-08-06 16:04 ` [PATCH v2 01/13] block: remove disk_free_zone_resources() Damien Le Moal
2026-08-10 14:46   ` Christoph Hellwig
2026-08-06 16:04 ` [PATCH v2 02/13] block: refactor disk_revalidate_zone_resources() Damien Le Moal
2026-08-10 14:47   ` Christoph Hellwig
2026-08-06 16:04 ` [PATCH v2 03/13] block: refactor disk_update_zone_resources() Damien Le Moal
2026-08-07  9:03   ` Hannes Reinecke
2026-08-10 14:48   ` Christoph Hellwig
2026-08-06 16:04 ` [PATCH v2 04/13] block: remember a zone type regardless of its condition Damien Le Moal
2026-08-07  9:11   ` Hannes Reinecke
2026-08-10 14:52   ` Christoph Hellwig
2026-08-06 16:04 ` [PATCH v2 05/13] block: refactor bdev_zone_is_seq() Damien Le Moal
2026-08-07  9:12   ` Hannes Reinecke
2026-08-06 16:04 ` [PATCH v2 06/13] block: introduce disk_for_all_zone_wplugs() Damien Le Moal
2026-08-07 10:20   ` Hannes Reinecke
2026-08-06 16:04 ` [PATCH v2 07/13] block: drop all zone write plugs on capacity changes Damien Le Moal
2026-08-07 10:24   ` Hannes Reinecke
2026-08-06 16:04 ` [PATCH v2 08/13] block: propagate readonly and offline conditions to zone write plugs Damien Le Moal
2026-08-07 10:32   ` Hannes Reinecke
2026-08-06 16:04 ` [PATCH v2 09/13] block: always treat offline and read-only zones as dead Damien Le Moal
2026-08-07 10:46   ` Hannes Reinecke
2026-08-07 15:48     ` Damien Le Moal
2026-08-06 16:04 ` Damien Le Moal [this message]
2026-08-07 11:42   ` [PATCH v2 10/13] block: fail zone management operations to read-only and offline zones Hannes Reinecke
2026-08-06 16:04 ` [PATCH v2 11/13] block: allow read-only and offline conventional zones Damien Le Moal
2026-08-07 11:48   ` Hannes Reinecke
2026-08-06 16:04 ` [PATCH v2 12/13] block: simplify disk_zone_set_cond() Damien Le Moal
2026-08-07 11:51   ` Hannes Reinecke
2026-08-06 16:04 ` [PATCH v2 13/13] block: flag zoned disks with GENHD_FL_NO_PART Damien Le Moal
2026-08-07 11:53   ` Hannes Reinecke
2026-08-07 15:34 ` [PATCH v2 00/13] Improve handling of offline and read-only zones Bart Van Assche

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260806160445.848337-11-dlemoal@kernel.org \
    --to=dlemoal@kernel.org \
    --cc=axboe@kernel.dk \
    --cc=hch@lst.de \
    --cc=linux-block@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox