From: Yu Kuai <yukuai1@huaweicloud.com>
To: Christoph Hellwig <hch@lst.de>, Jens Axboe <axboe@kernel.dk>,
Yu Kuai <yukuai1@huaweicloud.com>
Cc: linux-block@vger.kernel.org, "yukuai (C)" <yukuai3@huawei.com>
Subject: Re: [PATCH 1/5] brd; pass a bvec pointer to brd_do_bvec
Date: Tue, 22 Apr 2025 14:36:22 +0800 [thread overview]
Message-ID: <261b0310-a3e2-e455-3f60-372e4cd1f7d7@huaweicloud.com> (raw)
In-Reply-To: <20250421072641.1311040-2-hch@lst.de>
在 2025/04/21 15:26, Christoph Hellwig 写道:
> Pass the bvec to brd_do_bvec instead of marshalling the information into
> individual arguments.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> drivers/block/brd.c | 35 +++++++++++++----------------------
> 1 file changed, 13 insertions(+), 22 deletions(-)
>
LGTM
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
> diff --git a/drivers/block/brd.c b/drivers/block/brd.c
> index 292f127cae0a..c8974bc545fb 100644
> --- a/drivers/block/brd.c
> +++ b/drivers/block/brd.c
> @@ -189,12 +189,10 @@ static void copy_from_brd(void *dst, struct brd_device *brd,
> /*
> * Process a single bvec of a bio.
> */
> -static int brd_do_bvec(struct brd_device *brd, struct page *page,
> - unsigned int len, unsigned int off, blk_opf_t opf,
> - sector_t sector)
> +static int brd_rw_bvec(struct brd_device *brd, struct bio_vec *bv,
> + blk_opf_t opf, sector_t sector)
> {
> void *mem;
> - int err = 0;
>
> if (op_is_write(opf)) {
> /*
> @@ -202,24 +200,23 @@ static int brd_do_bvec(struct brd_device *brd, struct page *page,
> * block or filesystem layers from page reclaim.
> */
> gfp_t gfp = opf & REQ_NOWAIT ? GFP_NOWAIT : GFP_NOIO;
> + int err;
>
> - err = copy_to_brd_setup(brd, sector, len, gfp);
> + err = copy_to_brd_setup(brd, sector, bv->bv_len, gfp);
> if (err)
> - goto out;
> + return err;
> }
>
> - mem = kmap_atomic(page);
> + mem = kmap_atomic(bv->bv_page);
> if (!op_is_write(opf)) {
> - copy_from_brd(mem + off, brd, sector, len);
> - flush_dcache_page(page);
> + copy_from_brd(mem + bv->bv_offset, brd, sector, bv->bv_len);
> + flush_dcache_page(bv->bv_page);
> } else {
> - flush_dcache_page(page);
> - copy_to_brd(brd, mem + off, sector, len);
> + flush_dcache_page(bv->bv_page);
> + copy_to_brd(brd, mem + bv->bv_offset, sector, bv->bv_len);
> }
> kunmap_atomic(mem);
> -
> -out:
> - return err;
> + return 0;
> }
>
> static void brd_do_discard(struct brd_device *brd, sector_t sector, u32 size)
> @@ -255,15 +252,9 @@ static void brd_submit_bio(struct bio *bio)
> }
>
> bio_for_each_segment(bvec, bio, iter) {
> - unsigned int len = bvec.bv_len;
> int err;
>
> - /* Don't support un-aligned buffer */
> - WARN_ON_ONCE((bvec.bv_offset & (SECTOR_SIZE - 1)) ||
> - (len & (SECTOR_SIZE - 1)));
> -
> - err = brd_do_bvec(brd, bvec.bv_page, len, bvec.bv_offset,
> - bio->bi_opf, sector);
> + err = brd_rw_bvec(brd, &bvec, bio->bi_opf, sector);
> if (err) {
> if (err == -ENOMEM && bio->bi_opf & REQ_NOWAIT) {
> bio_wouldblock_error(bio);
> @@ -272,7 +263,7 @@ static void brd_submit_bio(struct bio *bio)
> bio_io_error(bio);
> return;
> }
> - sector += len >> SECTOR_SHIFT;
> + sector += bvec.bv_len >> SECTOR_SHIFT;
> }
>
> bio_endio(bio);
>
next prev parent reply other threads:[~2025-04-22 6:36 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-21 7:26 brd cleanups Christoph Hellwig
2025-04-21 7:26 ` [PATCH 1/5] brd; pass a bvec pointer to brd_do_bvec Christoph Hellwig
2025-04-22 6:36 ` Yu Kuai [this message]
2025-04-22 9:24 ` Hannes Reinecke
2025-04-28 9:21 ` Johannes Thumshirn
2025-04-21 7:26 ` [PATCH 2/5] brd: remove the sector variable in brd_submit_bio Christoph Hellwig
2025-04-22 6:38 ` Yu Kuai
2025-04-22 9:24 ` Hannes Reinecke
2025-04-21 7:26 ` [PATCH 3/5] brd: use bvec_kmap_local in brd_do_bvec Christoph Hellwig
2025-04-22 6:42 ` Yu Kuai
2025-04-22 9:25 ` Hannes Reinecke
2025-04-21 7:26 ` [PATCH 4/5] brd: split I/O at page boundaries Christoph Hellwig
2025-04-22 9:30 ` Hannes Reinecke
2025-04-22 11:10 ` Yu Kuai
2025-04-21 7:26 ` [PATCH 5/5] brd: use memcpy_{to,from]_page in brd_rw_bvec Christoph Hellwig
2025-04-22 9:30 ` Hannes Reinecke
2025-04-22 11:18 ` Yu Kuai
2025-04-22 13:50 ` Christoph Hellwig
2025-04-23 3:26 ` Yu Kuai
-- strict thread matches above, loose matches on Subject: below --
2025-04-28 14:09 brd cleanups v2 Christoph Hellwig
2025-04-28 14:09 ` [PATCH 1/5] brd: pass a bvec pointer to brd_do_bvec Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=261b0310-a3e2-e455-3f60-372e4cd1f7d7@huaweicloud.com \
--to=yukuai1@huaweicloud.com \
--cc=axboe@kernel.dk \
--cc=hch@lst.de \
--cc=linux-block@vger.kernel.org \
--cc=yukuai3@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox