pass a struct block_device to the blk-crypto interfaces v2

pass a struct block_device to the blk-crypto interfaces v2

[Christoph Hellwig]

Hi all,

this series switches the blk-crypto interfaces to take block_device
arguments instead of request_queues, and with that finishes off the
project to hide struct request_queue from file systems.

Changes since v1:
 - keep using request_queue in the Documentation for driver interfaces
 - rename to blk_crypto_cfg_supported to
   blk_crypto_config_supported_natively and move it to blk-crypto.[ch]
 - mark __blk_crypto_cfg_supported private

Diffstat:
 Documentation/block/inline-encryption.rst |   12 +++++-----
 block/blk-crypto-internal.h               |    3 ++
 block/blk-crypto.c                        |   33 ++++++++++++++++++------------
 drivers/md/dm-table.c                     |    2 -
 fs/crypto/inline_crypt.c                  |   14 ++++--------
 include/linux/blk-crypto-profile.h        |    3 --
 include/linux/blk-crypto.h                |   10 +++++----
 7 files changed, 41 insertions(+), 36 deletions(-)

[PATCH 1/3] blk-crypto: don't use struct request_queue for public interfaces

[Christoph Hellwig]

Switch all public blk-crypto interfaces to use struct block_device
arguments to specify the device they operate on instead of th
request_queue, which is a block layer implementation detail.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 Documentation/block/inline-encryption.rst | 12 ++++++------
 block/blk-crypto.c                        | 20 ++++++++++++--------
 drivers/md/dm-table.c                     |  2 +-
 fs/crypto/inline_crypt.c                  |  8 +++-----
 include/linux/blk-crypto.h                |  8 ++++----
 5 files changed, 26 insertions(+), 24 deletions(-)

diff --git a/Documentation/block/inline-encryption.rst b/Documentation/block/inline-encryption.rst
index 4d151fbe20583..f9bf18ea65093 100644
--- a/Documentation/block/inline-encryption.rst
+++ b/Documentation/block/inline-encryption.rst
@@ -142,7 +142,7 @@ Therefore, we also introduce *blk-crypto-fallback*, which is an implementation
 of inline encryption using the kernel crypto API.  blk-crypto-fallback is built
 into the block layer, so it works on any block device without any special setup.
 Essentially, when a bio with an encryption context is submitted to a
-request_queue that doesn't support that encryption context, the block layer will
+block_device that doesn't support that encryption context, the block layer will
 handle en/decryption of the bio using blk-crypto-fallback.
 
 For encryption, the data cannot be encrypted in-place, as callers usually rely
@@ -187,7 +187,7 @@ API presented to users of the block layer
 
 ``blk_crypto_config_supported()`` allows users to check ahead of time whether
 inline encryption with particular crypto settings will work on a particular
-request_queue -- either via hardware or via blk-crypto-fallback.  This function
+block_device -- either via hardware or via blk-crypto-fallback.  This function
 takes in a ``struct blk_crypto_config`` which is like blk_crypto_key, but omits
 the actual bytes of the key and instead just contains the algorithm, data unit
 size, etc.  This function can be useful if blk-crypto-fallback is disabled.
@@ -195,7 +195,7 @@ size, etc.  This function can be useful if blk-crypto-fallback is disabled.
 ``blk_crypto_init_key()`` allows users to initialize a blk_crypto_key.
 
 Users must call ``blk_crypto_start_using_key()`` before actually starting to use
-a blk_crypto_key on a request_queue (even if ``blk_crypto_config_supported()``
+a blk_crypto_key on a block_device (even if ``blk_crypto_config_supported()``
 was called earlier).  This is needed to initialize blk-crypto-fallback if it
 will be needed.  This must not be called from the data path, as this may have to
 allocate resources, which may deadlock in that case.
@@ -207,7 +207,7 @@ for en/decryption.  Users don't need to worry about freeing the bio_crypt_ctx
 later, as that happens automatically when the bio is freed or reset.
 
 Finally, when done using inline encryption with a blk_crypto_key on a
-request_queue, users must call ``blk_crypto_evict_key()``.  This ensures that
+block_device, users must call ``blk_crypto_evict_key()``.  This ensures that
 the key is evicted from all keyslots it may be programmed into and unlinked from
 any kernel data structures it may be linked into.
 
@@ -221,9 +221,9 @@ as follows:
 5. ``blk_crypto_evict_key()`` (after all I/O has completed)
 6. Zeroize the blk_crypto_key (this has no dedicated function)
 
-If a blk_crypto_key is being used on multiple request_queues, then
+If a blk_crypto_key is being used on multiple block_devices, then
 ``blk_crypto_config_supported()`` (if used), ``blk_crypto_start_using_key()``,
-and ``blk_crypto_evict_key()`` must be called on each request_queue.
+and ``blk_crypto_evict_key()`` must be called on each block_device.
 
 API presented to device drivers
 ===============================
diff --git a/block/blk-crypto.c b/block/blk-crypto.c
index a496aaef85ba4..0e0c2fc56c428 100644
--- a/block/blk-crypto.c
+++ b/block/blk-crypto.c
@@ -357,17 +357,18 @@ int blk_crypto_init_key(struct blk_crypto_key *blk_key, const u8 *raw_key,
  * request queue it's submitted to supports inline crypto, or the
  * blk-crypto-fallback is enabled and supports the cfg).
  */
-bool blk_crypto_config_supported(struct request_queue *q,
+bool blk_crypto_config_supported(struct block_device *bdev,
 				 const struct blk_crypto_config *cfg)
 {
 	return IS_ENABLED(CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK) ||
-	       __blk_crypto_cfg_supported(q->crypto_profile, cfg);
+	       __blk_crypto_cfg_supported(bdev_get_queue(bdev)->crypto_profile,
+	       				  cfg);
 }
 
 /**
  * blk_crypto_start_using_key() - Start using a blk_crypto_key on a device
+ * @bdev: block device to operate on
  * @key: A key to use on the device
- * @q: the request queue for the device
  *
  * Upper layers must call this function to ensure that either the hardware
  * supports the key's crypto settings, or the crypto API fallback has transforms
@@ -379,10 +380,11 @@ bool blk_crypto_config_supported(struct request_queue *q,
  *	   blk-crypto-fallback is either disabled or the needed algorithm
  *	   is disabled in the crypto API; or another -errno code.
  */
-int blk_crypto_start_using_key(const struct blk_crypto_key *key,
-			       struct request_queue *q)
+int blk_crypto_start_using_key(struct block_device *bdev,
+			       const struct blk_crypto_key *key)
 {
-	if (__blk_crypto_cfg_supported(q->crypto_profile, &key->crypto_cfg))
+	if (__blk_crypto_cfg_supported(bdev_get_queue(bdev)->crypto_profile,
+			&key->crypto_cfg))
 		return 0;
 	return blk_crypto_fallback_start_using_mode(key->crypto_cfg.crypto_mode);
 }
@@ -390,7 +392,7 @@ int blk_crypto_start_using_key(const struct blk_crypto_key *key,
 /**
  * blk_crypto_evict_key() - Evict a key from any inline encryption hardware
  *			    it may have been programmed into
- * @q: The request queue who's associated inline encryption hardware this key
+ * @bdev: The block_device who's associated inline encryption hardware this key
  *     might have been programmed into
  * @key: The key to evict
  *
@@ -400,9 +402,11 @@ int blk_crypto_start_using_key(const struct blk_crypto_key *key,
  *
  * Return: 0 on success or if the key wasn't in any keyslot; -errno on error.
  */
-int blk_crypto_evict_key(struct request_queue *q,
+int blk_crypto_evict_key(struct block_device *bdev,
 			 const struct blk_crypto_key *key)
 {
+	struct request_queue *q = bdev_get_queue(bdev);
+
 	if (__blk_crypto_cfg_supported(q->crypto_profile, &key->crypto_cfg))
 		return __blk_crypto_evict_key(q->crypto_profile, key);
 
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 078da18bb86d8..8541d5688f3a6 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1215,7 +1215,7 @@ static int dm_keyslot_evict_callback(struct dm_target *ti, struct dm_dev *dev,
 	struct dm_keyslot_evict_args *args = data;
 	int err;
 
-	err = blk_crypto_evict_key(bdev_get_queue(dev->bdev), args->key);
+	err = blk_crypto_evict_key(dev->bdev, args->key);
 	if (!args->err)
 		args->err = err;
 	/* Always try to evict the key from all devices. */
diff --git a/fs/crypto/inline_crypt.c b/fs/crypto/inline_crypt.c
index cea8b14007e6a..55c4d8c23d30d 100644
--- a/fs/crypto/inline_crypt.c
+++ b/fs/crypto/inline_crypt.c
@@ -139,8 +139,7 @@ int fscrypt_select_encryption_impl(struct fscrypt_info *ci)
 		return PTR_ERR(devs);
 
 	for (i = 0; i < num_devs; i++) {
-		if (!blk_crypto_config_supported(bdev_get_queue(devs[i]),
-						 &crypto_cfg))
+		if (!blk_crypto_config_supported(devs[i], &crypto_cfg))
 			goto out_free_devs;
 	}
 
@@ -184,8 +183,7 @@ int fscrypt_prepare_inline_crypt_key(struct fscrypt_prepared_key *prep_key,
 		goto fail;
 	}
 	for (i = 0; i < num_devs; i++) {
-		err = blk_crypto_start_using_key(blk_key,
-						 bdev_get_queue(devs[i]));
+		err = blk_crypto_start_using_key(devs[i], blk_key);
 		if (err)
 			break;
 	}
@@ -224,7 +222,7 @@ void fscrypt_destroy_inline_crypt_key(struct super_block *sb,
 	devs = fscrypt_get_devices(sb, &num_devs);
 	if (!IS_ERR(devs)) {
 		for (i = 0; i < num_devs; i++)
-			blk_crypto_evict_key(bdev_get_queue(devs[i]), blk_key);
+			blk_crypto_evict_key(devs[i], blk_key);
 		kfree(devs);
 	}
 	kfree_sensitive(blk_key);
diff --git a/include/linux/blk-crypto.h b/include/linux/blk-crypto.h
index 69b24fe92cbf1..b314e2febcaf5 100644
--- a/include/linux/blk-crypto.h
+++ b/include/linux/blk-crypto.h
@@ -94,13 +94,13 @@ int blk_crypto_init_key(struct blk_crypto_key *blk_key, const u8 *raw_key,
 			unsigned int dun_bytes,
 			unsigned int data_unit_size);
 
-int blk_crypto_start_using_key(const struct blk_crypto_key *key,
-			       struct request_queue *q);
+int blk_crypto_start_using_key(struct block_device *bdev,
+			       const struct blk_crypto_key *key);
 
-int blk_crypto_evict_key(struct request_queue *q,
+int blk_crypto_evict_key(struct block_device *bdev,
 			 const struct blk_crypto_key *key);
 
-bool blk_crypto_config_supported(struct request_queue *q,
+bool blk_crypto_config_supported(struct block_device *bdev,
 				 const struct blk_crypto_config *cfg);
 
 #else /* CONFIG_BLK_INLINE_ENCRYPTION */
-- 
2.30.2

Re: [PATCH 1/3] blk-crypto: don't use struct request_queue for public interfaces

[Eric Biggers]

On Mon, Nov 07, 2022 at 03:42:27PM +0100, Christoph Hellwig wrote:
> diff --git a/block/blk-crypto.c b/block/blk-crypto.c
> index a496aaef85ba4..0e0c2fc56c428 100644
> --- a/block/blk-crypto.c
> +++ b/block/blk-crypto.c
> @@ -357,17 +357,18 @@ int blk_crypto_init_key(struct blk_crypto_key *blk_key, const u8 *raw_key,
>   * request queue it's submitted to supports inline crypto, or the
>   * blk-crypto-fallback is enabled and supports the cfg).
>   */

Replace "request queue" with block_device in the above comment?

> -bool blk_crypto_config_supported(struct request_queue *q,
> +bool blk_crypto_config_supported(struct block_device *bdev,
>  				 const struct blk_crypto_config *cfg)
>  {
>  	return IS_ENABLED(CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK) ||
> -	       __blk_crypto_cfg_supported(q->crypto_profile, cfg);
> +	       __blk_crypto_cfg_supported(bdev_get_queue(bdev)->crypto_profile,
> +	       				  cfg);
>  }

There's a whitespace error here:

$ checkpatch 0001-blk-crypto-don-t-use-struct-request_queue-for-public.patch
ERROR: code indent should use tabs where possible
#87: FILE: block/blk-crypto.c:365:
+^I       ^I^I^I^I  cfg);$

WARNING: please, no space before tabs
#87: FILE: block/blk-crypto.c:365:
+^I       ^I^I^I^I  cfg);$

> -int blk_crypto_evict_key(struct request_queue *q,
> +int blk_crypto_evict_key(struct block_device *bdev,
>                          const struct blk_crypto_key *key)
>  {
> +	struct request_queue *q = bdev_get_queue(bdev);
> +
>	if (__blk_crypto_cfg_supported(q->crypto_profile, &key->crypto_cfg))
>		return __blk_crypto_evict_key(q->crypto_profile, key);
>
>	/*
>        * If the request_queue didn't support the key, then blk-crypto-fallback
>        * may have been used, so try to evict the key from blk-crypto-fallback.
>        */
>	return blk_crypto_fallback_evict_key(key);

Likewise, s/request_queue/block_device/ in the above comment.

> diff --git a/include/linux/blk-crypto.h b/include/linux/blk-crypto.h
> index 69b24fe92cbf1..b314e2febcaf5 100644
> --- a/include/linux/blk-crypto.h
> +++ b/include/linux/blk-crypto.h
[...]
>
> struct request;
> struct request_queue;

These forward declarations are no longer needed and can be removed.

- Eric

Re: [PATCH 1/3] blk-crypto: don't use struct request_queue for public interfaces

[Christoph Hellwig]

On Mon, Nov 07, 2022 at 12:16:22PM -0800, Eric Biggers wrote:
> On Mon, Nov 07, 2022 at 03:42:27PM +0100, Christoph Hellwig wrote:
> > diff --git a/block/blk-crypto.c b/block/blk-crypto.c
> > index a496aaef85ba4..0e0c2fc56c428 100644
> > --- a/block/blk-crypto.c
> > +++ b/block/blk-crypto.c
> > @@ -357,17 +357,18 @@ int blk_crypto_init_key(struct blk_crypto_key *blk_key, const u8 *raw_key,
> >   * request queue it's submitted to supports inline crypto, or the
> >   * blk-crypto-fallback is enabled and supports the cfg).
> >   */
> 
> Replace "request queue" with block_device in the above comment?

Done.

> > -	       __blk_crypto_cfg_supported(q->crypto_profile, cfg);
> > +	       __blk_crypto_cfg_supported(bdev_get_queue(bdev)->crypto_profile,
> > +	       				  cfg);
> >  }
> 
> There's a whitespace error here:

Fixed.

> >	/*
> >        * If the request_queue didn't support the key, then blk-crypto-fallback
> >        * may have been used, so try to evict the key from blk-crypto-fallback.
> >        */
> >	return blk_crypto_fallback_evict_key(key);
> 
> Likewise, s/request_queue/block_device/ in the above comment.

Done.

> > struct request;
> > struct request_queue;
> 
> These forward declarations are no longer needed and can be removed.

Done.

[PATCH 2/3] blk-crypto: add a blk_crypto_config_supported_natively helper

[Christoph Hellwig]

Add a blk_crypto_cfg_supported helper that wraps
__blk_crypto_cfg_supported to retreive the crypto_profile from the
request queue.  With this fscrypt can stop including
blk-crypto-profile.h and rely on the public consumer interface in
blk-crypto.h.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 block/blk-crypto.c         | 21 ++++++++++++---------
 fs/crypto/inline_crypt.c   |  6 ++----
 include/linux/blk-crypto.h |  2 ++
 3 files changed, 16 insertions(+), 13 deletions(-)

diff --git a/block/blk-crypto.c b/block/blk-crypto.c
index 0e0c2fc56c428..ceb5a4c8f0306 100644
--- a/block/blk-crypto.c
+++ b/block/blk-crypto.c
@@ -267,7 +267,6 @@ bool __blk_crypto_bio_prep(struct bio **bio_ptr)
 {
 	struct bio *bio = *bio_ptr;
 	const struct blk_crypto_key *bc_key = bio->bi_crypt_context->bc_key;
-	struct blk_crypto_profile *profile;
 
 	/* Error if bio has no data. */
 	if (WARN_ON_ONCE(!bio_has_data(bio))) {
@@ -284,10 +283,9 @@ bool __blk_crypto_bio_prep(struct bio **bio_ptr)
 	 * Success if device supports the encryption context, or if we succeeded
 	 * in falling back to the crypto API.
 	 */
-	profile = bdev_get_queue(bio->bi_bdev)->crypto_profile;
-	if (__blk_crypto_cfg_supported(profile, &bc_key->crypto_cfg))
+	if (blk_crypto_config_supported_natively(bio->bi_bdev,
+						 &bc_key->crypto_cfg))
 		return true;
-
 	if (blk_crypto_fallback_bio_prep(bio_ptr))
 		return true;
 fail:
@@ -352,6 +350,13 @@ int blk_crypto_init_key(struct blk_crypto_key *blk_key, const u8 *raw_key,
 	return 0;
 }
 
+bool blk_crypto_config_supported_natively(struct block_device *bdev,
+					  const struct blk_crypto_config *cfg)
+{
+	return __blk_crypto_cfg_supported(bdev_get_queue(bdev)->crypto_profile,
+					  cfg);
+}
+
 /*
  * Check if bios with @cfg can be en/decrypted by blk-crypto (i.e. either the
  * request queue it's submitted to supports inline crypto, or the
@@ -361,8 +366,7 @@ bool blk_crypto_config_supported(struct block_device *bdev,
 				 const struct blk_crypto_config *cfg)
 {
 	return IS_ENABLED(CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK) ||
-	       __blk_crypto_cfg_supported(bdev_get_queue(bdev)->crypto_profile,
-	       				  cfg);
+	       blk_crypto_config_supported_natively(bdev, cfg);
 }
 
 /**
@@ -383,8 +387,7 @@ bool blk_crypto_config_supported(struct block_device *bdev,
 int blk_crypto_start_using_key(struct block_device *bdev,
 			       const struct blk_crypto_key *key)
 {
-	if (__blk_crypto_cfg_supported(bdev_get_queue(bdev)->crypto_profile,
-			&key->crypto_cfg))
+	if (blk_crypto_config_supported_natively(bdev, &key->crypto_cfg))
 		return 0;
 	return blk_crypto_fallback_start_using_mode(key->crypto_cfg.crypto_mode);
 }
@@ -407,7 +410,7 @@ int blk_crypto_evict_key(struct block_device *bdev,
 {
 	struct request_queue *q = bdev_get_queue(bdev);
 
-	if (__blk_crypto_cfg_supported(q->crypto_profile, &key->crypto_cfg))
+	if (blk_crypto_config_supported_natively(bdev, &key->crypto_cfg))
 		return __blk_crypto_evict_key(q->crypto_profile, key);
 
 	/*
diff --git a/fs/crypto/inline_crypt.c b/fs/crypto/inline_crypt.c
index 55c4d8c23d30d..8bfb3ce864766 100644
--- a/fs/crypto/inline_crypt.c
+++ b/fs/crypto/inline_crypt.c
@@ -12,7 +12,7 @@
  * provides the key and IV to use.
  */
 
-#include <linux/blk-crypto-profile.h>
+#include <linux/blk-crypto.h>
 #include <linux/blkdev.h>
 #include <linux/buffer_head.h>
 #include <linux/sched/mm.h>
@@ -77,10 +77,8 @@ static void fscrypt_log_blk_crypto_impl(struct fscrypt_mode *mode,
 	unsigned int i;
 
 	for (i = 0; i < num_devs; i++) {
-		struct request_queue *q = bdev_get_queue(devs[i]);
-
 		if (!IS_ENABLED(CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK) ||
-		    __blk_crypto_cfg_supported(q->crypto_profile, cfg)) {
+		    blk_crypto_config_supported_natively(devs[i], cfg)) {
 			if (!xchg(&mode->logged_blk_crypto_native, 1))
 				pr_info("fscrypt: %s using blk-crypto (native)\n",
 					mode->friendly_name);
diff --git a/include/linux/blk-crypto.h b/include/linux/blk-crypto.h
index b314e2febcaf5..1271ff39ab162 100644
--- a/include/linux/blk-crypto.h
+++ b/include/linux/blk-crypto.h
@@ -100,6 +100,8 @@ int blk_crypto_start_using_key(struct block_device *bdev,
 int blk_crypto_evict_key(struct block_device *bdev,
 			 const struct blk_crypto_key *key);
 
+bool blk_crypto_config_supported_natively(struct block_device *bdev,
+					  const struct blk_crypto_config *cfg);
 bool blk_crypto_config_supported(struct block_device *bdev,
 				 const struct blk_crypto_config *cfg);
 
-- 
2.30.2

Re: [PATCH 2/3] blk-crypto: add a blk_crypto_config_supported_natively helper

[Eric Biggers]

On Mon, Nov 07, 2022 at 03:42:28PM +0100, Christoph Hellwig wrote:
> Add a blk_crypto_cfg_supported helper that wraps

s/blk_crypto_cfg_supported/blk_crypto_config_supported_natively/

> __blk_crypto_cfg_supported to retreive the crypto_profile from the

s/retreive/retrieve/.  checkpatch warns about this.

Otherwise this patch look good, thanks!

- Eric

[PATCH 3/3] blk-crypto: move __blk_crypto_cfg_supported to blk-crypto-internal.h

[Christoph Hellwig]

__blk_crypto_cfg_supported is only used internally by the blk-crypto
code now, so move it out of the public header.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 block/blk-crypto-internal.h        | 3 +++
 include/linux/blk-crypto-profile.h | 3 ---
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/block/blk-crypto-internal.h b/block/blk-crypto-internal.h
index e6818ffaddbf8..c587b3e1886c9 100644
--- a/block/blk-crypto-internal.h
+++ b/block/blk-crypto-internal.h
@@ -19,6 +19,9 @@ struct blk_crypto_mode {
 
 extern const struct blk_crypto_mode blk_crypto_modes[];
 
+bool __blk_crypto_cfg_supported(struct blk_crypto_profile *profile,
+				const struct blk_crypto_config *cfg);
+
 #ifdef CONFIG_BLK_INLINE_ENCRYPTION
 
 int blk_crypto_sysfs_register(struct request_queue *q);
diff --git a/include/linux/blk-crypto-profile.h b/include/linux/blk-crypto-profile.h
index bbab65bd54288..e990ec9b32aa4 100644
--- a/include/linux/blk-crypto-profile.h
+++ b/include/linux/blk-crypto-profile.h
@@ -144,9 +144,6 @@ blk_status_t blk_crypto_get_keyslot(struct blk_crypto_profile *profile,
 
 void blk_crypto_put_keyslot(struct blk_crypto_keyslot *slot);
 
-bool __blk_crypto_cfg_supported(struct blk_crypto_profile *profile,
-				const struct blk_crypto_config *cfg);
-
 int __blk_crypto_evict_key(struct blk_crypto_profile *profile,
 			   const struct blk_crypto_key *key);
 
-- 
2.30.2

Re: [PATCH 3/3] blk-crypto: move __blk_crypto_cfg_supported to blk-crypto-internal.h

[Eric Biggers]

On Mon, Nov 07, 2022 at 03:42:29PM +0100, Christoph Hellwig wrote:
> __blk_crypto_cfg_supported is only used internally by the blk-crypto
> code now, so move it out of the public header.

"public header" is ambiguous here.  blk-crypto.h is the "public header" for
upper layers, but blk-crypto-profile.h is the "public header" for drivers.
Maybe write "blk-crypto-profile.h, which is included by drivers".

> diff --git a/block/blk-crypto-internal.h b/block/blk-crypto-internal.h
> index e6818ffaddbf8..c587b3e1886c9 100644
> --- a/block/blk-crypto-internal.h
> +++ b/block/blk-crypto-internal.h
> @@ -19,6 +19,9 @@ struct blk_crypto_mode {
>  
>  extern const struct blk_crypto_mode blk_crypto_modes[];
>  
> +bool __blk_crypto_cfg_supported(struct blk_crypto_profile *profile,
> +				const struct blk_crypto_config *cfg);
> +
>  #ifdef CONFIG_BLK_INLINE_ENCRYPTION

It should go in the '#ifdef CONFIG_BLK_INLINE_ENCRYPTION' section.

> diff --git a/include/linux/blk-crypto-profile.h b/include/linux/blk-crypto-profile.h
> index bbab65bd54288..e990ec9b32aa4 100644
> --- a/include/linux/blk-crypto-profile.h
> +++ b/include/linux/blk-crypto-profile.h
> @@ -144,9 +144,6 @@ blk_status_t blk_crypto_get_keyslot(struct blk_crypto_profile *profile,
>  
>  void blk_crypto_put_keyslot(struct blk_crypto_keyslot *slot);
>  
> -bool __blk_crypto_cfg_supported(struct blk_crypto_profile *profile,
> -				const struct blk_crypto_config *cfg);
> -
>  int __blk_crypto_evict_key(struct blk_crypto_profile *profile,
>  			   const struct blk_crypto_key *key);

Otherwise I guess this patch is fine.  The exact same argument would also apply
to blk_crypto_get_keyslot(), blk_crypto_put_keyslot(), and
__blk_crypto_evict_key(), though.  It might be worth handling them all in one
patch.

- Eric

pass a struct block_device to the blk-crypto interfaces v3

[Christoph Hellwig]

Hi all,

this series switches the blk-crypto interfaces to take block_device
arguments instead of request_queues, and with that finishes off the
project to hide struct request_queue from file systems.

Changes since v2:
 - update a few comments
 - fix a whitespace error
 - remove now unused forward declarations
 - fix spelling errors an not precise enough wording in commit messages
 - move a few more declarations around inside or between headers

Changes since v1:
 - keep using request_queue in the Documentation for driver interfaces
 - rename to blk_crypto_cfg_supported to
   blk_crypto_config_supported_natively and move it to blk-crypto.[ch]
 - mark __blk_crypto_cfg_supported private

Diffstat:
 Documentation/block/inline-encryption.rst |   12 ++++-----
 block/blk-crypto-internal.h               |   12 +++++++++
 block/blk-crypto.c                        |   37 +++++++++++++++++-------------
 drivers/md/dm-table.c                     |    2 -
 fs/crypto/inline_crypt.c                  |   14 ++++-------
 include/linux/blk-crypto-profile.h        |   12 ---------
 include/linux/blk-crypto.h                |   13 ++++------
 7 files changed, 52 insertions(+), 50 deletions(-)

[PATCH 2/3] blk-crypto: add a blk_crypto_config_supported_natively helper

[Christoph Hellwig]

Add a blk_crypto_config_supported_natively helper that wraps
__blk_crypto_cfg_supported to retrieve the crypto_profile from the
request queue.  With this fscrypt can stop including
blk-crypto-profile.h and rely on the public consumer interface in
blk-crypto.h.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 block/blk-crypto.c         | 21 ++++++++++++---------
 fs/crypto/inline_crypt.c   |  6 ++----
 include/linux/blk-crypto.h |  2 ++
 3 files changed, 16 insertions(+), 13 deletions(-)

diff --git a/block/blk-crypto.c b/block/blk-crypto.c
index 0047436b63371..6a461f4d676a3 100644
--- a/block/blk-crypto.c
+++ b/block/blk-crypto.c
@@ -267,7 +267,6 @@ bool __blk_crypto_bio_prep(struct bio **bio_ptr)
 {
 	struct bio *bio = *bio_ptr;
 	const struct blk_crypto_key *bc_key = bio->bi_crypt_context->bc_key;
-	struct blk_crypto_profile *profile;
 
 	/* Error if bio has no data. */
 	if (WARN_ON_ONCE(!bio_has_data(bio))) {
@@ -284,10 +283,9 @@ bool __blk_crypto_bio_prep(struct bio **bio_ptr)
 	 * Success if device supports the encryption context, or if we succeeded
 	 * in falling back to the crypto API.
 	 */
-	profile = bdev_get_queue(bio->bi_bdev)->crypto_profile;
-	if (__blk_crypto_cfg_supported(profile, &bc_key->crypto_cfg))
+	if (blk_crypto_config_supported_natively(bio->bi_bdev,
+						 &bc_key->crypto_cfg))
 		return true;
-
 	if (blk_crypto_fallback_bio_prep(bio_ptr))
 		return true;
 fail:
@@ -352,6 +350,13 @@ int blk_crypto_init_key(struct blk_crypto_key *blk_key, const u8 *raw_key,
 	return 0;
 }
 
+bool blk_crypto_config_supported_natively(struct block_device *bdev,
+					  const struct blk_crypto_config *cfg)
+{
+	return __blk_crypto_cfg_supported(bdev_get_queue(bdev)->crypto_profile,
+					  cfg);
+}
+
 /*
  * Check if bios with @cfg can be en/decrypted by blk-crypto (i.e. either the
  * block_device it's submitted to supports inline crypto, or the
@@ -361,8 +366,7 @@ bool blk_crypto_config_supported(struct block_device *bdev,
 				 const struct blk_crypto_config *cfg)
 {
 	return IS_ENABLED(CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK) ||
-	       __blk_crypto_cfg_supported(bdev_get_queue(bdev)->crypto_profile,
-					  cfg);
+	       blk_crypto_config_supported_natively(bdev, cfg);
 }
 
 /**
@@ -383,8 +387,7 @@ bool blk_crypto_config_supported(struct block_device *bdev,
 int blk_crypto_start_using_key(struct block_device *bdev,
 			       const struct blk_crypto_key *key)
 {
-	if (__blk_crypto_cfg_supported(bdev_get_queue(bdev)->crypto_profile,
-			&key->crypto_cfg))
+	if (blk_crypto_config_supported_natively(bdev, &key->crypto_cfg))
 		return 0;
 	return blk_crypto_fallback_start_using_mode(key->crypto_cfg.crypto_mode);
 }
@@ -407,7 +410,7 @@ int blk_crypto_evict_key(struct block_device *bdev,
 {
 	struct request_queue *q = bdev_get_queue(bdev);
 
-	if (__blk_crypto_cfg_supported(q->crypto_profile, &key->crypto_cfg))
+	if (blk_crypto_config_supported_natively(bdev, &key->crypto_cfg))
 		return __blk_crypto_evict_key(q->crypto_profile, key);
 
 	/*
diff --git a/fs/crypto/inline_crypt.c b/fs/crypto/inline_crypt.c
index 55c4d8c23d30d..8bfb3ce864766 100644
--- a/fs/crypto/inline_crypt.c
+++ b/fs/crypto/inline_crypt.c
@@ -12,7 +12,7 @@
  * provides the key and IV to use.
  */
 
-#include <linux/blk-crypto-profile.h>
+#include <linux/blk-crypto.h>
 #include <linux/blkdev.h>
 #include <linux/buffer_head.h>
 #include <linux/sched/mm.h>
@@ -77,10 +77,8 @@ static void fscrypt_log_blk_crypto_impl(struct fscrypt_mode *mode,
 	unsigned int i;
 
 	for (i = 0; i < num_devs; i++) {
-		struct request_queue *q = bdev_get_queue(devs[i]);
-
 		if (!IS_ENABLED(CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK) ||
-		    __blk_crypto_cfg_supported(q->crypto_profile, cfg)) {
+		    blk_crypto_config_supported_natively(devs[i], cfg)) {
 			if (!xchg(&mode->logged_blk_crypto_native, 1))
 				pr_info("fscrypt: %s using blk-crypto (native)\n",
 					mode->friendly_name);
diff --git a/include/linux/blk-crypto.h b/include/linux/blk-crypto.h
index 561ca92e204d5..a33d32f5c2684 100644
--- a/include/linux/blk-crypto.h
+++ b/include/linux/blk-crypto.h
@@ -97,6 +97,8 @@ int blk_crypto_start_using_key(struct block_device *bdev,
 int blk_crypto_evict_key(struct block_device *bdev,
 			 const struct blk_crypto_key *key);
 
+bool blk_crypto_config_supported_natively(struct block_device *bdev,
+					  const struct blk_crypto_config *cfg);
 bool blk_crypto_config_supported(struct block_device *bdev,
 				 const struct blk_crypto_config *cfg);
 
-- 
2.30.2

Re: [PATCH 2/3] blk-crypto: add a blk_crypto_config_supported_natively helper

[Eric Biggers]

On Mon, Nov 14, 2022 at 05:29:43AM +0100, Christoph Hellwig wrote:
> Add a blk_crypto_config_supported_natively helper that wraps
> __blk_crypto_cfg_supported to retrieve the crypto_profile from the
> request queue.  With this fscrypt can stop including
> blk-crypto-profile.h and rely on the public consumer interface in
> blk-crypto.h.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

Reviewed-by: Eric Biggers <ebiggers@google.com>

- Eric