RE: [Bluez-devel] Qualification testing.

["Daryl Van Vorst" <daryl@wideray.com>]

[-- Attachment #1: Type: text/plain, Size: 1313 bytes --]

Hi Marcel,

> > An hcidump is attached. Though I don't think you'll learn 
> much from it.
> 
> actually I learned that hcidump can't deal with the hint bit 
> and that it
> don't understand the QoS option. Both is fixed in CVS and 
> looks now like
> this:

Good stuff.

> > L2CAP(s): Config req: dcid 0x0040 flags 0x0001 clen 4
>   [MTU 672] 
> < L2CAP(s): Config rsp: scid 0x0040 flags 0x0001 result 0 clen 0
> > L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 28
>   [FlushTO 65535] [QoS 0x01 (Best effort)] 
> < L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> 
> We send two empty resposonses, but from my current 
> understanding this is
> fine. All of the options have set the hint bit (indicated by 
> []). Maybe
> I am missing something, but the specification says:
> 
> 	option is a hint; if the option is not recognized then
> 	skip the option and continue processing
> 
> So our responses are valid, because we answer both requests.

As far as I can tell it's fine too. I'm waiting for more information from
the test house. Will let you know what I find out.

> For you it is the best to go with the hack, because I don't 
> think that I
> will backport such a change to the 2.4 kernel series.

Ok.

> However do you also have a hcidump from that test for me?

Attached.

-Daryl.

[-- Attachment #2: cos_cfd_bv_12 --]
[-- Type: application/octet-stream, Size: 512 bytes --]