From: "Jonathan Leong" <aptos@gmx.net>
To: <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] Help with Digianswer protocol analyzer
Date: Thu, 13 Oct 2005 21:56:43 +0800 [thread overview]
Message-ID: <000701c5cffd$f4e8cc20$6701a8c0@mainframe> (raw)
In-Reply-To: 1129210251.6308.0.camel@localhost.localdomain
Hi Marcel,
It should be the BPA-100. According to your website, I reckon it belongs to
the first generation (08fd:0001) .
The device isnt marked Tektronix but Digianswer A/S Bluetooth Protocol
Analyzer but shouldn't be much of a difference.
The loaded driver is hci_usb instead of bpa10x, maybe the driver was
missing? modprobe bpa10x.ko gave me an error.
Regards,
Jonathan Leong
----- Original Message -----
From: "Marcel Holtmann" <marcel@holtmann.org>
To: <bluez-users@lists.sourceforge.net>
Sent: Thursday, October 13, 2005 9:30 PM
Subject: Re: [Bluez-users] Help with Digianswer protocol analyzer
> Hi Jonathan,
>
>> > show me the content of /proc/bus/usb/devices and check if you have the
>> > bpa10x kernel driver. If not then you might need to install a newer
>> > kernel.
>>
>> here we go,
>>
>> T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
>> D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs= 1
>> P: Vendor=08fd ProdID=0001 Rev= 1.00
>> C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=300mA
>> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb
>> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
>> I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>> I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
>> I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
>> I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
>>
>> Meanwhile, I'll go upgrade my kernel to 2.6.13 and get it patch.
>> I'll post the results in a bit.
>
> this won't help, I think. Is this the BPA-100 or the BPA-105?
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by:
> Power Architecture Resource Center: Free content, downloads, discussions,
> and more. http://solutions.newsforge.com/ibmarch.tmpl
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2005-10-13 13:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-13 10:30 [Bluez-users] Help with Digianswer protocol analyzer Jonathan Leong
2005-10-13 11:06 ` Marcel Holtmann
2005-10-13 12:51 ` Jonathan Leong
2005-10-13 13:30 ` Marcel Holtmann
2005-10-13 13:56 ` Jonathan Leong [this message]
2005-10-13 14:11 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000701c5cffd$f4e8cc20$6701a8c0@mainframe' \
--to=aptos@gmx.net \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox