From: Marcel Holtmann <marcel@holtmann.org>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] Help with Digianswer protocol analyzer
Date: Thu, 13 Oct 2005 15:30:51 +0200 [thread overview]
Message-ID: <1129210251.6308.0.camel@localhost.localdomain> (raw)
In-Reply-To: <000401c5cff4$d138d620$6701a8c0@mainframe>
Hi Jonathan,
> > show me the content of /proc/bus/usb/devices and check if you have the
> > bpa10x kernel driver. If not then you might need to install a newer
> > kernel.
>
> here we go,
>
> T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs= 1
> P: Vendor=08fd ProdID=0001 Rev= 1.00
> C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=300mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
>
> Meanwhile, I'll go upgrade my kernel to 2.6.13 and get it patch.
> I'll post the results in a bit.
this won't help, I think. Is this the BPA-100 or the BPA-105?
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2005-10-13 13:30 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-13 10:30 [Bluez-users] Help with Digianswer protocol analyzer Jonathan Leong
2005-10-13 11:06 ` Marcel Holtmann
2005-10-13 12:51 ` Jonathan Leong
2005-10-13 13:30 ` Marcel Holtmann [this message]
2005-10-13 13:56 ` Jonathan Leong
2005-10-13 14:11 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1129210251.6308.0.camel@localhost.localdomain \
--to=marcel@holtmann.org \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox