[Bluez-users] Do bnep and obex work simultaneously?

[Bluez-users] Do bnep and obex work simultaneously?

[Taneli Vähäkangas]

Hello! I have a computer running kernel 2.6.7-mh1 and it is acting as a
PANU (pand --connect ...), which works very well. The GN on the other end
is a similarly configured computer. However, now I can't use ussp-push's
obextool on the PANU computer to send files to the mobile phone. Is this
expected or did I do something wrong? obextool push ... complains:
Can't connect. Too many links (31)
and fair enough, the connect() system call receives EMLINK. 

	Taneli




-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Do bnep and obex work simultaneously?

[Marcel Holtmann]

Hi Taneli,

> I have a computer running kernel 2.6.7-mh1 and it is acting as a
> PANU (pand --connect ...), which works very well. The GN on the other end
> is a similarly configured computer. However, now I can't use ussp-push's
> obextool on the PANU computer to send files to the mobile phone. Is this
> expected or did I do something wrong? obextool push ... complains:
> Can't connect. Too many links (31)
> and fair enough, the connect() system call receives EMLINK. 

from the Bluetooth stack this is possible, but maybe your local device
won't support it. What does "hciconfig -a" say?

Regards

Marcel




-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Do bnep and obex work simultaneously?

[Taneli Vähäkangas]

On Fri, 2004-07-02 at 18:39, Marcel Holtmann wrote:
> Hi Taneli,
> 
> > I have a computer running kernel 2.6.7-mh1 and it is acting as a
> > PANU (pand --connect ...), which works very well. The GN on the other end
> > is a similarly configured computer. However, now I can't use ussp-push's
> > obextool on the PANU computer to send files to the mobile phone. Is this
> > expected or did I do something wrong? obextool push ... complains:
> > Can't connect. Too many links (31)
> > and fair enough, the connect() system call receives EMLINK. 
> 
> from the Bluetooth stack this is possible, but maybe your local device
> won't support it. What does "hciconfig -a" say?

Here goes:
hci0:	Type: USB
	BD Address: 00:40:05:XX:XX:XX ACL MTU: 192:8  SCO MTU: 64:8
	UP RUNNING PSCAN ISCAN 
	RX bytes:21619370 acl:80564 sco:0 events:9814 errors:0
	TX bytes:753307 acl:9833 sco:0 commands:23 errors:0
	Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
	Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
	Link policy: HOLD SNIFF PARK 
	Link mode: SLAVE ACCEPT 
	Name: 'mylly-0'
	Class: 0x000100
	Service Classes: Unspecified
	Device Class: Computer, Uncategorized
	HCI Ver: 1.1 (0x1) HCI Rev: 0x1bb LMP Ver: 1.1 (0x1) LMP Subver: 0x1bb
	Manufacturer: Cambridge Silicon Radio (10)

It is a D-Link DBT-120.

Thanks for the fast reply!

	Taneli

Re: [Bluez-users] Do bnep and obex work simultaneously?

[Marcel Holtmann]

Hi Taneli,

> > from the Bluetooth stack this is possible, but maybe your local device
> > won't support it. What does "hciconfig -a" say?
> 
> Here goes:
> hci0:	Type: USB
> 	BD Address: 00:40:05:XX:XX:XX ACL MTU: 192:8  SCO MTU: 64:8
> 	UP RUNNING PSCAN ISCAN 
> 	RX bytes:21619370 acl:80564 sco:0 events:9814 errors:0
> 	TX bytes:753307 acl:9833 sco:0 commands:23 errors:0
> 	Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> 	Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
> 	Link policy: HOLD SNIFF PARK 
> 	Link mode: SLAVE ACCEPT 
> 	Name: 'mylly-0'
> 	Class: 0x000100
> 	Service Classes: Unspecified
> 	Device Class: Computer, Uncategorized
> 	HCI Ver: 1.1 (0x1) HCI Rev: 0x1bb LMP Ver: 1.1 (0x1) LMP Subver: 0x1bb
> 	Manufacturer: Cambridge Silicon Radio (10)
> 
> It is a D-Link DBT-120.

the scatternet support of the HCI 15.3 firmware is very limited. If you
know someone with a MacOS X you can ask him to update your dongle.
Otherwise you are limited here, but maybe it already helps if you
activate the role switch (rswitch) in hcid.conf.

Regards

Marcel




-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Do bnep and obex work simultaneously?

[Bc. Michal Semler]

This is caused because of roleswitch - you probably didn't enable it in you=
r=20
configuration, or your dongle doesn't support role switch

Michal

On Friday 02 of July 2004 17:28, Taneli V=E4h=E4kangas wrote:
> Hello! I have a computer running kernel 2.6.7-mh1 and it is acting as a
> PANU (pand --connect ...), which works very well. The GN on the other end
> is a similarly configured computer. However, now I can't use ussp-push's
> obextool on the PANU computer to send files to the mobile phone. Is this
> expected or did I do something wrong? obextool push ... complains:
> Can't connect. Too many links (31)
> and fair enough, the connect() system call receives EMLINK.
>
> 	Taneli
>
>
>
>
> -------------------------------------------------------
> This SF.Net email sponsored by Black Hat Briefings & Training.
> Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
> digital self defense, top technical experts, no vendor pitches,
> unmatched networking opportunities. Visit www.blackhat.com
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users


-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Do bnep and obex work simultaneously?

[Taneli Vähäkangas]

On Fri, 2004-07-02 at 19:06, Marcel Holtmann wrote:
> Hi Taneli,
> 
[snip]
> > 	HCI Ver: 1.1 (0x1) HCI Rev: 0x1bb LMP Ver: 1.1 (0x1) LMP Subver: 0x1bb
> > 	Manufacturer: Cambridge Silicon Radio (10)

Aha! The GN side has a newer (?) chip:

        HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d
        Manufacturer: Cambridge Silicon Radio (10)

And it did work! Thanks for the hint. 

> the scatternet support of the HCI 15.3 firmware is very limited. If you
> know someone with a MacOS X you can ask him to update your dongle.
> Otherwise you are limited here, but maybe it already helps if you
> activate the role switch (rswitch) in hcid.conf.

rswitch didn't help, so I need to eventually ask my friend to help me
out. Thanks again!

	Taneli

rfcomm0: connection refused

[Virat Gohil]

Hi All,

I tried connecting to GPRS using my nokia 6820 and CSR usbdongle. I am able
to start hcid, sdpd.

I am also able to l2ping my device.

I can bind the device to rfcomm0, after patching the kernel

I was able to connect to The Internet once, but after I restarted I got the
following error while connecting using pppd

rfcomm0: connection refused!

I thought may be I messed up a setting here or there, so I re-installed
RedHat 9.0 and tried again, I was able to conenct once, after I restart I
get the same problem. please help.

The following is the output of hcidump:
HCIDump - HCI packet analyzer ver 1.8
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection(0x01|0x0005) plen 13
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Connect Complete(0x03) plen 11
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
< HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Command Complete(0x0e) plen 6
> HCI Event: Page Scan Repetition Mode Change(0x20) plen 7
> HCI Event: Max Slots Change(0x1b) plen 3
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 1024
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 32772
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x40 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 0 ack_timer 0 frame_size 1019
max_retrans 0 credits 7
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x40 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 0 ack_timer 0 frame_size 324
max_retrans 0 credits 0
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Link Key Request(0x17) plen 6
< HCI Command: Link Key Request Reply(0x01|0x000b) plen 22
> HCI Event: Command Complete(0x0e) plen 10
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
< HCI Command: Disconnect(0x01|0x0006) plen 3
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Disconn Complete(0x05) plen 4

Thank You, and all the people who have contributed in the development of
bluez!!

Virat