Query regarding the PTS MAP 1.2 push message test case execution

Query regarding the PTS MAP 1.2 push message test case execution

[Gowtham Anandha Babu]

[-- Attachment #1: Type: text/plain, Size: 852 bytes --]

Hi,

I am currently validating all the test cases of PTS 5.3 for MAP 1.2.
How to push the message bluez map-client to MSE(server)? 
The approach which I followed is described below:

On MCE(Bluez - map-client):
1) Run bluetoothd
2) Run obexd
3) ./map-client -d <REMOTE_BT_ADDR>  -c telecom/msg/outbox/ -p PUSH_MSG

On MSE(PTS tool)
1) Running the test-case: TC_MCE_MMU_BV_01_I
2) After running the test-case. I am getting the User Action Required
(Please find this in attached image).

The PUSH_MSG will be the filename of the message which we are pushing to
MSE(server). 
So, I tried pushing the attached file with the same command as shown above
by replacing PUSH_MSG with filename of the attached. 
But I am getting "org.bluez.obex.Error.Failed: Unable to open file".

How to push the message? Am I missing something?

Regards,
Gowtham Anandha Babu

[-- Attachment #2: PushMessageGSM --]
[-- Type: application/octet-stream, Size: 1260 bytes --]

BEGIN:BMSG
VERSION:1.0
STATUS:UNREAD
TYPE:SMS_GSM
FOLDER:TELECOM/MSG/INBOX
BEGIN:VCARD
VERSION:2.1
N:IUT
TEL:1234567890
END:VCARD
BEGIN:BENV
BEGIN:VCARD
VERSION:2.1
N:PTS
TEL:14256913524
END:VCARD
BEGIN:BBODY
CHARSET:UTF-8
LENGTH:978
BEGIN:MSG

PTS GSM message testing 1.PTS GSM message testing 1.PTS GSM message testing 1.PTS GSM message testing 1.
PTS GSM message testing 1.PTS GSM message testing 1.PTS GSM message testing 1.PTS GSM message testing 1.
PTS GSM message testing 1.PTS GSM message testing 1.PTS GSM message testing 1.PTS GSM message testing 1.
PTS GSM message testing 1.PTS GSM message testing 1.PTS GSM message testing 1.PTS GSM message testing 1.
PTS GSM message testing 1.PTS GSM message testing 1.PTS GSM message testing 1.PTS GSM message testing 1.
PTS GSM message testing 1.PTS GSM message testing 1.PTS GSM message testing 1.PTS GSM message testing 1.
PTS GSM message testing 1.PTS GSM message testing 1.PTS GSM message testing 1.PTS GSM message testing 1.
PTS GSM message testing 1.PTS GSM message testing 1.PTS GSM message testing 1.PTS GSM message testing 1.
PTS GSM message testing 1.PTS GSM message testing 1.PTS GSM message testing 1.PTS GSM message testing 1.

END:MSG
END:BBODY
END:BENV
END:BMSG

[-- Attachment #3: Capture_push.PNG --]
[-- Type: image/png, Size: 23116 bytes --]

Re: Query regarding the PTS MAP 1.2 push message test case execution

[Luiz Augusto von Dentz]

Hi,

On Tue, Oct 7, 2014 at 1:42 PM, Gowtham Anandha Babu
<gowtham.ab@samsung.com> wrote:
> Hi,
>
> I am currently validating all the test cases of PTS 5.3 for MAP 1.2.
> How to push the message bluez map-client to MSE(server)?
> The approach which I followed is described below:
>
> On MCE(Bluez - map-client):
> 1) Run bluetoothd
> 2) Run obexd
> 3) ./map-client -d <REMOTE_BT_ADDR>  -c telecom/msg/outbox/ -p PUSH_MSG
>
> On MSE(PTS tool)
> 1) Running the test-case: TC_MCE_MMU_BV_01_I
> 2) After running the test-case. I am getting the User Action Required
> (Please find this in attached image).
>
> The PUSH_MSG will be the filename of the message which we are pushing to
> MSE(server).
> So, I tried pushing the attached file with the same command as shown above
> by replacing PUSH_MSG with filename of the attached.
> But I am getting "org.bluez.obex.Error.Failed: Unable to open file".
>
> How to push the message? Am I missing something?

First you need to check if obexd has permission to open the file, also
you can try obexctl instead using send command should have the same
result as map-client but it is a bit more up to date in terms of
features.


-- 
Luiz Augusto von Dentz