* [Bluez-devel] Park & sniff modes @ 2004-05-06 9:17 zubiwat 2004-05-06 10:10 ` [Bluez-devel] Where does the L2CAP FCS was checked? Wang Haiguang 2004-05-06 21:16 ` [Bluez-devel] Park & sniff modes Marcel Holtmann 0 siblings, 2 replies; 4+ messages in thread From: zubiwat @ 2004-05-06 9:17 UTC (permalink / raw) To: bluez devel [-- Attachment #1: Type: text/plain, Size: 107 bytes --] Hi How can I put BT into park mode or sniff mode? Is there any command to do this? Regards Maciej [-- Attachment #2: Type: text/html, Size: 683 bytes --] ^ permalink raw reply [flat|nested] 4+ messages in thread
* [Bluez-devel] Where does the L2CAP FCS was checked? 2004-05-06 9:17 [Bluez-devel] Park & sniff modes zubiwat @ 2004-05-06 10:10 ` Wang Haiguang 2004-05-06 21:15 ` Marcel Holtmann 2004-05-06 21:16 ` [Bluez-devel] Park & sniff modes Marcel Holtmann 1 sibling, 1 reply; 4+ messages in thread From: Wang Haiguang @ 2004-05-06 10:10 UTC (permalink / raw) To: bluez devel [-- Attachment #1: Type: text/plain, Size: 176 bytes --] Hi, I read the bluetooth specification of L2CAP. There is a FCS at the end of a L2CAP frame. Could you please tell me in which fucntion this FCS is checked. Thxs. Haiguang [-- Attachment #2: Type: text/html, Size: 1462 bytes --] ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Bluez-devel] Where does the L2CAP FCS was checked? 2004-05-06 10:10 ` [Bluez-devel] Where does the L2CAP FCS was checked? Wang Haiguang @ 2004-05-06 21:15 ` Marcel Holtmann 0 siblings, 0 replies; 4+ messages in thread From: Marcel Holtmann @ 2004-05-06 21:15 UTC (permalink / raw) To: Wang Haiguang; +Cc: bluez devel Hi Haiguang, please stop sending emails in blue. Keep it plain 7 bit ASCII. > I read the bluetooth specification of L2CAP. There is a FCS at the end > of a L2CAP frame. > > Could you please tell me in which fucntion this FCS is checked. the FCS is for L2CAP with retransmission and flow control which is part of Bluetooth 1.2 and currently this feature is not supported by BlueZ. And actually not by any other Bluetooth stack that I know of. So it is checked nowhere. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by Sleepycat Software Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO. http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3 _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Bluez-devel] Park & sniff modes 2004-05-06 9:17 [Bluez-devel] Park & sniff modes zubiwat 2004-05-06 10:10 ` [Bluez-devel] Where does the L2CAP FCS was checked? Wang Haiguang @ 2004-05-06 21:16 ` Marcel Holtmann 1 sibling, 0 replies; 4+ messages in thread From: Marcel Holtmann @ 2004-05-06 21:16 UTC (permalink / raw) To: zubiwat; +Cc: bluez devel Hi Maciej, > How can I put BT into park mode or sniff mode? > Is there any command to do this? what about reading the HCI part of the Bluetooth specification? Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by Sleepycat Software Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO. http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3 _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2004-05-06 21:16 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2004-05-06 9:17 [Bluez-devel] Park & sniff modes zubiwat 2004-05-06 10:10 ` [Bluez-devel] Where does the L2CAP FCS was checked? Wang Haiguang 2004-05-06 21:15 ` Marcel Holtmann 2004-05-06 21:16 ` [Bluez-devel] Park & sniff modes Marcel Holtmann
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox