[Bluez-devel] BT not responding

[Bluez-devel] BT not responding

[zubiwat]

[-- Attachment #1: Type: text/plain, Size: 3014 bytes --]

Hi
Why my BT device isn't responding when I'm sending any commands for example to read BT_ADDR like this: 0x01 0x00 0x09.
It doesn't respond to me, even with an error code - nothing.
But when I use first code from blueZ hciconfig like this

 int  clen = 0, i;                /* Command len */
 static int csr_seq = 0;     /* Sequence number of command */
 int  divisor;

         /* Try to read the build ID of the CSR chip */
 clen = 5 + (5 + 6) * 2;
         /* HCI header */
 cmd[0] = HCI_COMMAND_PKT;
 cmd[1] = 0x09;  /* CSR command */
 cmd[2] = 0xfc;  /* MANUFACTURER_SPEC */
 cmd[3] = 1 + (5 + 6) * 2; /* len */
         /* CSR MSG header */
 cmd[4] = 0xC2;  /* first+last+channel=BCC */
         /* CSR BCC header */
 cmd[5] = 0x00;  /* type = GET-REQ */
 cmd[6] = 0x00;  /* - msB */
 cmd[7] = 5 + 4;  /* len */
 cmd[8] = 0x00;  /* - msB */
 cmd[9] = csr_seq & 0xFF;/* seq num */
 cmd[10] = (csr_seq >> 8) & 0xFF; /* - msB */
 csr_seq++;
 cmd[11] = 0x19;  /* var_id = CSR_CMD_BUILD_ID */
 cmd[12] = 0x28;  /* - msB */
 cmd[13] = 0x00;  /* status = STATUS_OK */
 cmd[14] = 0x00;  /* - msB */
         /* CSR BCC payload */
 memset(cmd + 15, 0, 6 * 2);

  do{
    for (i=0; i < clen+1; i++) PutByteU0 (cmd[i]);

    read_hci_event(resp,100);

  }while (resp[1] != 0xff);


         /* Try to read the current speed of the CSR chip */
 clen = 5 + (5 + 4)*2;
         /* -- HCI header */
 cmd[0] = HCI_COMMAND_PKT;
 cmd[1] = 0x09;  /* CSR command */
 cmd[2] = 0xfc;  /* MANUFACTURER_SPEC */
 cmd[3] = 1 + (5 + 4)*2; /* len */
         /* -- CSR BCC header -- */
 cmd[9] = csr_seq & 0xFF; /* seq num */
 cmd[10] = (csr_seq >> 8) & 0xFF; /* - msB */
 csr_seq++;
 cmd[11] = 0x02;  /* var_id = CONFIG_UART */
 cmd[12] = 0x68;  /* - msB */

         /* Now, create the command that will set the UART speed */
         /* CSR BCC header */
 cmd[5] = 0x02;   /* type = SET-REQ */
 cmd[6] = 0x00;   /* - msB */
 cmd[9] = csr_seq & 0xFF; /* seq num */
 cmd[10] = (csr_seq >> 8) & 0xFF;/* - msB */
 csr_seq++;

 divisor = (921600*64+7812)/15625;

        /* No parity, one stop bit -> divisor |= 0x0000; */
 cmd[15] = (divisor) & 0xFF;  /* divider */
 cmd[16] = (divisor >> 8) & 0xFF; /* - msB */
             /* The rest of the payload will be 0x00 */

    for (i=0; i < clen; i++) PutByteU0 (cmd[i]);

It answers like this: 04 FF 13 C2 01 00 09 00 02 00 02 68 00 00 BF 0E 00 00 00 00 
What is it? Is it kind of special bits of csr chip or what?
I know it is event but after this BT responds only for bad commands like this 04 10 01 fe  but when I try read BT_ADDR it's quiet.
What this code is up to? 
Please send me UART specification or sth where it's written how to set this up and howto communicate with csr chip. It's very important for me !
I spent almost 2 weeks to find out how to communicate whit it and nothing works good. I don't know where to find some info. I looked almost everywhere?

Regards

Maciej

Maciej Zubilewicz

[-- Attachment #2: Type: text/html, Size: 6566 bytes --]

Re: [Bluez-devel] BT not responding

[Marcel Holtmann]

Hi Maciej,

there is no need to post this on both mailing lists.

> Why my BT device isn't responding when I'm sending any commands for
> example to read BT_ADDR like this: 0x01 0x00 0x09.
> It doesn't respond to me, even with an error code - nothing.
> But when I use first code from blueZ hciconfig like this
>  
>  int  clen = 0, i;                /* Command len */
>  static int csr_seq = 0;     /* Sequence number of command */
>  int  divisor;
> 
>          /* Try to read the build ID of the CSR chip */
>  clen = 5 + (5 + 6) * 2;
>          /* HCI header */
>  cmd[0] = HCI_COMMAND_PKT;
>  cmd[1] = 0x09;  /* CSR command */
>  cmd[2] = 0xfc;  /* MANUFACTURER_SPEC */
>  cmd[3] = 1 + (5 + 6) * 2; /* len */
>          /* CSR MSG header */
>  cmd[4] = 0xC2;  /* first+last+channel=BCC */
>          /* CSR BCC header */
>  cmd[5] = 0x00;  /* type = GET-REQ */
>  cmd[6] = 0x00;  /* - msB */
>  cmd[7] = 5 + 4;  /* len */
>  cmd[8] = 0x00;  /* - msB */
>  cmd[9] = csr_seq & 0xFF;/* seq num */
>  cmd[10] = (csr_seq >> 8) & 0xFF; /* - msB */
>  csr_seq++;
>  cmd[11] = 0x19;  /* var_id = CSR_CMD_BUILD_ID */
>  cmd[12] = 0x28;  /* - msB */
>  cmd[13] = 0x00;  /* status = STATUS_OK */
>  cmd[14] = 0x00;  /* - msB */
>          /* CSR BCC payload */
>  memset(cmd + 15, 0, 6 * 2);
>  
>   do{
>     for (i=0; i < clen+1; i++) PutByteU0 (cmd[i]);
>  
>     read_hci_event(resp,100);
>  
>   }while (resp[1] != 0xff);
>  
>  
>          /* Try to read the current speed of the CSR chip */
>  clen = 5 + (5 + 4)*2;
>          /* -- HCI header */
>  cmd[0] = HCI_COMMAND_PKT;
>  cmd[1] = 0x09;  /* CSR command */
>  cmd[2] = 0xfc;  /* MANUFACTURER_SPEC */
>  cmd[3] = 1 + (5 + 4)*2; /* len */
>          /* -- CSR BCC header -- */
>  cmd[9] = csr_seq & 0xFF; /* seq num */
>  cmd[10] = (csr_seq >> 8) & 0xFF; /* - msB */
>  csr_seq++;
>  cmd[11] = 0x02;  /* var_id = CONFIG_UART */
>  cmd[12] = 0x68;  /* - msB */
>  
>          /* Now, create the command that will set the UART speed */
>          /* CSR BCC header */
>  cmd[5] = 0x02;   /* type = SET-REQ */
>  cmd[6] = 0x00;   /* - msB */
>  cmd[9] = csr_seq & 0xFF; /* seq num */
>  cmd[10] = (csr_seq >> 8) & 0xFF;/* - msB */
>  csr_seq++;
>  
>  divisor = (921600*64+7812)/15625;
>  
>         /* No parity, one stop bit -> divisor |= 0x0000; */
>  cmd[15] = (divisor) & 0xFF;  /* divider */
>  cmd[16] = (divisor >> 8) & 0xFF; /* - msB */
>              /* The rest of the payload will be 0x00 */
> 
>     for (i=0; i < clen; i++) PutByteU0 (cmd[i]);
>  
> It answers like this: 04 FF 13 C2 01 00 09 00 02 00 02 68 00 00 BF 0E
> 00 00 00 00 
> What is it? Is it kind of special bits of csr chip or what?
> I know it is event but after this BT responds only for bad commands
> like this 04 10 01 fe  but when I try read BT_ADDR it's quiet.
> What this code is up to? 

This is CSR specific and you must ask your module manufacturer for more
details.

> Please send me UART specification or sth where it's written how to set
> this up and howto communicate with csr chip. It's very important for
> me !

The H:4 UART specification is part of the Bluetooth 1.1 specification.

> I spent almost 2 weeks to find out how to communicate whit it and
> nothing works good. I don't know where to find some info. I looked
> almost everywhere?

Start using BlueZ and don't worry about it or this is the wrong mailing
list for you ;)

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel