[Bluez-devel] TODO: --enable/--disable options in bluez-utils

[Bluez-devel] TODO: --enable/--disable options in bluez-utils

[David Stockwell]

[-- Attachment #1.1: Type: text/plain, Size: 747 bytes --]

Subsequent to yesterday's post, I found all of the configure options to enable/disable various options.

In my application, I have no real need (at this point, at least) for audio streaming, and I might like to diable -gstreamer, -alsa, and similar options.  Probably would also disable -serial and certain other profiles.

And there are other things, like --enable-usb, which if I disable it might turn off my USB-connected Bluetooth dongle.

However, at this point I am using --enable-all, since there is no real documentation of the dependencies.  Any chance these might be documented: with 27 options, that's about 268 million permutations, which would take a while to figure out...

Something for the TODO list?

David Stockwell


[-- Attachment #1.2: Type: text/html, Size: 1681 bytes --]

[-- Attachment #2: Type: text/plain, Size: 278 bytes --]

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] TODO: --enable/--disable options in bluez-utils

[Marcel Holtmann]

Hi David,

> Subsequent to yesterday's post, I found all of the configure options  
> to enable/disable various options.
>
> In my application, I have no real need (at this point, at least) for  
> audio streaming, and I might like to diable -gstreamer, -alsa, and  
> similar options.  Probably would also disable -serial and certain  
> other profiles.
>
> And there are other things, like --enable-usb, which if I disable it  
> might turn off my USB-connected Bluetooth dongle.

I will not. It is only needed for using libusb.

> However, at this point I am using --enable-all, since there is no  
> real documentation of the dependencies.  Any chance these might be  
> documented: with 27 options, that's about 268 million permutations,  
> which would take a while to figure out...

A lot of these options will go away when we hit 4.0, but feel free to  
start a wiki page and start documenting them.

Regards

Marcel


-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel