* [Bluez-users] Using BlueZ for network access via ppp does not work, nothing at all in log files
@ 2004-04-11 21:31 Richard Pruen
2004-04-12 13:37 ` Marcel Holtmann
0 siblings, 1 reply; 4+ messages in thread
From: Richard Pruen @ 2004-04-11 21:31 UTC (permalink / raw)
To: BlueZ Mailing List
Hello everyone,
Hope you can help, because this has got me stumped.
I am trying to use dund to allow my pocket pc 2003 device to connect to my
home network. And it won't work, having checked all the log files there is
nothing in them at all relating to this. If I remove rfcomm tty support from
the kernel, then I do get entries saying that rfcomm can't connect. But with
it enabled there isn't a peep out of anything at all, dund, rfcomm and pppd
are all silent.
rfcomm can be connected to serial ports on my other pc, so everything seems
to work ok.
I have a Belken USB dongle, and slackware 9.1 with the 2.6.4 kernel, I have
the latest BlueZ packages.
Hope someone has some ideas of what to try to find the problem.
Thanks
Richard
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Bluez-users] Using BlueZ for network access via ppp does not work, nothing at all in log files
2004-04-11 21:31 [Bluez-users] Using BlueZ for network access via ppp does not work, nothing at all in log files Richard Pruen
@ 2004-04-12 13:37 ` Marcel Holtmann
2004-04-16 20:14 ` [Bluez-users] Using BlueZ for network access via ppp does notwork, " Richard Pruen
0 siblings, 1 reply; 4+ messages in thread
From: Marcel Holtmann @ 2004-04-12 13:37 UTC (permalink / raw)
To: Richard Pruen; +Cc: BlueZ Mailing List
Hi Richard,
> I am trying to use dund to allow my pocket pc 2003 device to connect to my
> home network. And it won't work, having checked all the log files there is
> nothing in them at all relating to this. If I remove rfcomm tty support from
> the kernel, then I do get entries saying that rfcomm can't connect. But with
> it enabled there isn't a peep out of anything at all, dund, rfcomm and pppd
> are all silent.
dund needs the RFCOMM TTY support. No matter what.
> rfcomm can be connected to serial ports on my other pc, so everything seems
> to work ok.
>
> I have a Belken USB dongle, and slackware 9.1 with the 2.6.4 kernel, I have
> the latest BlueZ packages.
>
> Hope someone has some ideas of what to try to find the problem.
Without any logfiles or hcidump or any other clues, how should we find
your problem.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Bluez-users] Using BlueZ for network access via ppp does notwork, nothing at all in log files
2004-04-12 13:37 ` Marcel Holtmann
@ 2004-04-16 20:14 ` Richard Pruen
2004-04-18 23:18 ` David West
0 siblings, 1 reply; 4+ messages in thread
From: Richard Pruen @ 2004-04-16 20:14 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: BlueZ Mailing List
From: "Marcel Holtmann" <marcel@holtmann.org>
Hello Marcel,
> Without any logfiles or hcidump or any other clues, how should we find
> your problem.
I still don't have any output from logfiles, nothing is written except the
following when dund is started: Apr 14 22:30:19 linux dund[29905]: DUN
daemon ver 1.1
hcidump follows....
Sorry for the late reply, but I have had the week from hell at work.
Richard
HCIDump - HCI packet analyzer ver 1.8
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request(0x04) plen 10
< HCI Command: Accept Connection Request(0x01|0x0009) plen 7
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Link Key Request(0x17) plen 6
< HCI Command: Link Key Request Reply(0x01|0x000b) plen 22
> HCI Event: Command Complete(0x0e) plen 10
> HCI Event: Connect Complete(0x03) plen 11
< HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4
> HCI Event: Page Scan Repetition Mode Change(0x20) plen 7
> HCI Event: Command Complete(0x0e) plen 6
< HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4
> HCI Event: Max Slots Change(0x1b) plen 3
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Connection Packet Type Changed(0x1d) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x006c
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x006c result 0 status 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 4096
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x006c flags 0x0000 result 0 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x006c flags 0x0000 clen 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0029 flags 0x02 dlen 17
> ACL data: handle 0x0029 flags 0x01 dlen 17
> ACL data: handle 0x0029 flags 0x01 dlen 2
L2CAP(d): cid 0x40 len 32 [psm 1]
SDP SSA Req: tid 0x0 len 0x1b
pat uuid-128 0x1103 (DUN)
max 0xff8
aid(s) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 0x0029 flags 0x02 dlen 33
L2CAP(d): cid 0x6c len 29 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x18
cnt 0x15
srv rec #0
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > >
cont 00
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x006d
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x006d result 0 status 0
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x006c
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x006c
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x006d flags 0x0000 result 0 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x006d flags 0x0000 clen 4
MTU 1024
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x41 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x6d len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x41 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 32 ack_timer 0 frame_size 127
max_retrans 0 credits 7
< ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x6d len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 32 ack_timer 0 frame_size 127
max_retrans 0 credits 7
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x41 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x6d len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6d len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6d len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 0 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6d len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 0 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 9
L2CAP(d): cid 0x6d len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 33
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6d len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 13
L2CAP(d): cid 0x41 len 9 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 4 fcs 0x86 credits 1
> ACL data: handle 0x0029 flags 0x02 dlen 11
L2CAP(d): cid 0x41 len 7 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 3 fcs 0x9a
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 4 fcs 0x9a
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 0 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6d len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 0 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6d len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 4 fcs 0x9a
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x6d len 4 [psm 3]
RFCOMM(s): DISC: cr 0 dlci 2 pf 1 ilen 0 fcs 0xd9
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0041 scid 0x006d
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x006d
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x006e
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x006e result 0 status 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 4096
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x006e flags 0x0000 result 0 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x006e flags 0x0000 clen 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0029 flags 0x02 dlen 36
L2CAP(d): cid 0x40 len 32 [psm 1]
SDP SSA Req: tid 0x0 len 0x1b
pat uuid-128 0x1103 (DUN)
max 0xff8
aid(s) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 0x0029 flags 0x02 dlen 33
L2CAP(d): cid 0x6e len 29 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x18
cnt 0x15
srv rec #0
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > >
cont 00
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x006f
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x006f result 0 status 0
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x006e
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x006e
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x006f flags 0x0000 result 0 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x006f flags 0x0000 clen 4
MTU 1024
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x41 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x6f len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x41 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 32 ack_timer 0 frame_size 127
max_retrans 0 credits 7
< ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x6f len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 32 ack_timer 0 frame_size 127
max_retrans 0 credits 7
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x41 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x6f len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6f len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6f len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 9
L2CAP(d): cid 0x6f len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 33
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 0 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6f len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 0 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6f len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 13
L2CAP(d): cid 0x41 len 9 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 4 fcs 0x86 credits 1
> ACL data: handle 0x0029 flags 0x02 dlen 11
L2CAP(d): cid 0x41 len 7 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 3 fcs 0x9a
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 4 fcs 0x9a
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 0 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6f len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 0 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6f len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 4 fcs 0x9a
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x6f len 4 [psm 3]
RFCOMM(s): DISC: cr 0 dlci 2 pf 1 ilen 0 fcs 0xd9
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0041 scid 0x006f
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x006f
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
< HCI Command: Disconnect(0x01|0x0006) plen 3
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Disconn Complete(0x05) plen 4
^ permalink raw reply [flat|nested] 4+ messages in thread* RE: [Bluez-users] Using BlueZ for network access via ppp does notwork, nothing at all in log files
2004-04-16 20:14 ` [Bluez-users] Using BlueZ for network access via ppp does notwork, " Richard Pruen
@ 2004-04-18 23:18 ` David West
0 siblings, 0 replies; 4+ messages in thread
From: David West @ 2004-04-18 23:18 UTC (permalink / raw)
To: 'BlueZ Mailing List'
Hi Richard,
I had a similar problem to yours (see threads from last week). I ended
up solving it by uninstalling and reinstalling the bluez packages.
Not the nicest way of doing things, but it often works!
Good luck,
David
-----Original Message-----
From: bluez-users-admin@lists.sourceforge.net
[mailto:bluez-users-admin@lists.sourceforge.net] On Behalf Of Richard
Pruen
Sent: 17 April 2004 6:15 AM
To: Marcel Holtmann
Cc: BlueZ Mailing List
Subject: Re: [Bluez-users] Using BlueZ for network access via ppp does
notwork, nothing at all in log files
From: "Marcel Holtmann" <marcel@holtmann.org>
Hello Marcel,
> Without any logfiles or hcidump or any other clues, how should we find
> your problem.
I still don't have any output from logfiles, nothing is written except
the following when dund is started: Apr 14 22:30:19 linux dund[29905]:
DUN daemon ver 1.1
hcidump follows....
Sorry for the late reply, but I have had the week from hell at work.
Richard
HCIDump - HCI packet analyzer ver 1.8
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request(0x04) plen 10
< HCI Command: Accept Connection Request(0x01|0x0009) plen 7
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Link Key Request(0x17) plen 6
< HCI Command: Link Key Request Reply(0x01|0x000b) plen 22
> HCI Event: Command Complete(0x0e) plen 10
> HCI Event: Connect Complete(0x03) plen 11
< HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4
> HCI Event: Page Scan Repetition Mode Change(0x20) plen 7
> HCI Event: Command Complete(0x0e) plen 6
< HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4
> HCI Event: Max Slots Change(0x1b) plen 3
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Connection Packet Type Changed(0x1d) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x006c
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x006c result 0 status 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 4096
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x006c flags 0x0000 result 0 clen 0 < ACL
data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x006c flags 0x0000 clen 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0029 flags 0x02 dlen 17
> ACL data: handle 0x0029 flags 0x01 dlen 17
> ACL data: handle 0x0029 flags 0x01 dlen 2
L2CAP(d): cid 0x40 len 32 [psm 1]
SDP SSA Req: tid 0x0 len 0x1b
pat uuid-128 0x1103 (DUN)
max 0xff8
aid(s) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 0x0029 flags 0x02 dlen 33
L2CAP(d): cid 0x6c len 29 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x18
cnt 0x15
srv rec #0
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > >
cont 00
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x006d
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x006d result 0 status 0
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x006c
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x006c
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x006d flags 0x0000 result 0 clen 0 < ACL
data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x006d flags 0x0000 clen 4
MTU 1024
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x41 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x6d len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x41 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 32 ack_timer 0 frame_size
127 max_retrans 0 credits 7 < ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x6d len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 32 ack_timer 0 frame_size
127 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x41 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x6d len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6d len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6d len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 0 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6d len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 0 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 9
L2CAP(d): cid 0x6d len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 33
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6d len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 13
L2CAP(d): cid 0x41 len 9 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 4 fcs 0x86 credits 1
> ACL data: handle 0x0029 flags 0x02 dlen 11
L2CAP(d): cid 0x41 len 7 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 3 fcs 0x9a
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 4 fcs 0x9a
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 0 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6d len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 0 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6d len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 4 fcs 0x9a
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x6d len 4 [psm 3]
RFCOMM(s): DISC: cr 0 dlci 2 pf 1 ilen 0 fcs 0xd9
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0041 scid 0x006d
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x006d
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x006e
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x006e result 0 status 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 4096
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x006e flags 0x0000 result 0 clen 0 < ACL
data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x006e flags 0x0000 clen 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0029 flags 0x02 dlen 36
L2CAP(d): cid 0x40 len 32 [psm 1]
SDP SSA Req: tid 0x0 len 0x1b
pat uuid-128 0x1103 (DUN)
max 0xff8
aid(s) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 0x0029 flags 0x02 dlen 33
L2CAP(d): cid 0x6e len 29 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x18
cnt 0x15
srv rec #0
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > >
cont 00
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x006f
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x006f result 0 status 0
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x006e
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x006e
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x006f flags 0x0000 result 0 clen 0 < ACL
data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x006f flags 0x0000 clen 4
MTU 1024
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x41 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x6f len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x41 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 32 ack_timer 0 frame_size
127 max_retrans 0 credits 7 < ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x6f len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 32 ack_timer 0 frame_size
127 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x41 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x6f len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6f len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6f len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 9
L2CAP(d): cid 0x6f len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 33
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 0 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6f len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 0 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6f len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 13
L2CAP(d): cid 0x41 len 9 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 4 fcs 0x86 credits 1
> ACL data: handle 0x0029 flags 0x02 dlen 11
L2CAP(d): cid 0x41 len 7 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 3 fcs 0x9a
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 4 fcs 0x9a
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 0 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6f len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 0 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x6f len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x41 len 8 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 4 fcs 0x9a
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x6f len 4 [psm 3]
RFCOMM(s): DISC: cr 0 dlci 2 pf 1 ilen 0 fcs 0xd9
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0041 scid 0x006f
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x006f
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
< HCI Command: Disconnect(0x01|0x0006) plen 3
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Disconn Complete(0x05) plen 4
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2004-04-18 23:18 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-04-11 21:31 [Bluez-users] Using BlueZ for network access via ppp does not work, nothing at all in log files Richard Pruen
2004-04-12 13:37 ` Marcel Holtmann
2004-04-16 20:14 ` [Bluez-users] Using BlueZ for network access via ppp does notwork, " Richard Pruen
2004-04-18 23:18 ` David West
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox