From: "taylor" <taylor@ms.usi.com.tw>
To: <bluez-users@lists.sourceforge.net>
Subject: [Bluez-users] How add correctly add SP service record to SDP daemon
Date: Thu, 29 Jul 2004 16:12:28 +0800 [thread overview]
Message-ID: <019d01c47543$d6aa4c40$df0618ac@USI08844> (raw)
[-- Attachment #1: Type: text/plain, Size: 839 bytes --]
Dear,
I could use those step to connect the Linux SP to Windows Series profile
At the linux side:
step 1:rfcomm connect 0 <BD address> 1
setp 2:open minicom -s,
set the device as /dev/rfcomm0
set the baud rate as 19200 8N1, no flow control
exit
At the windows site:
step 1: open the hyerpterminal,
set up baud rate as 19200 8N1 , no flow control
step 2: sucessfuly transfer the data
But I hope ass the SP profile service record into SDP daemon, I do thoe step
At the linux side
step 1: rfcomm bind 0 <BD Addreess> 1
step 2: sdp add SP 1
At the windows site:
step1: Obrowse the SP service
step 2: reject SP connect, the port is not correct.
Taylor Shieh
Engineer, Bluetooth Module Section
New Technology Development Dept., R&D Division
Tel:886-49-2325876 Ext:2188
[-- Attachment #2: Type: text/html, Size: 2144 bytes --]
next reply other threads:[~2004-07-29 8:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-07-29 8:12 taylor [this message]
2004-07-29 8:36 ` [Bluez-users] How add correctly add SP service record to SDP daemon Marcel Holtmann
2004-07-30 0:43 ` [Bluez-users] How add correctly add SP service record to SDPdaemon taylor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='019d01c47543$d6aa4c40$df0618ac@USI08844' \
--to=taylor@ms.usi.com.tw \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox