[Bluez-users] bluez freezes with 2.4.23

[Bluez-users] bluez freezes with 2.4.23

[Charles]

Hi--

  I'd like to report that I see bluetooth freezes with stock
linux-2.4.23. The freezes will occur either upon suspend/resume, or
immediately when one of the bluez modules is loaded (this seems to
depend on other modules loaded).  These are hard freezes of the whole
system. I do not have this problem with stock 2.4.22.

The modules loaded are
hci_usb                 8120   1
rfcomm                 32128   0 (autoclean)
l2cap                  16816   1 (autoclean) [rfcomm]
bluez                  32644   3 (autoclean) [hci_usb rfcomm l2cap]

The hardware is: internal Toshiba laptop (Portege M100) bluetooth-
with usb interface.

I've gone back to 2.4.22, but wonder if someone has suggestions on
getting 2.4.23 working.

thanks--
Charles

-- 
Charles Schwieters     email:   Charles.Schwieters@nih.gov
		       www:     http://schwieters.org/cds
phone: (301) 402-4914  PGP key: http://schwieters.org/cds/pgp.txt



-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?  SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] bluez freezes with 2.4.23

[Marcel Holtmann]

HI Charles,

>   I'd like to report that I see bluetooth freezes with stock
> linux-2.4.23. The freezes will occur either upon suspend/resume, or
> immediately when one of the bluez modules is loaded (this seems to
> depend on other modules loaded).  These are hard freezes of the whole
> system. I do not have this problem with stock 2.4.22.
> 
> The modules loaded are
> hci_usb                 8120   1
> rfcomm                 32128   0 (autoclean)
> l2cap                  16816   1 (autoclean) [rfcomm]
> bluez                  32644   3 (autoclean) [hci_usb rfcomm l2cap]
> 
> The hardware is: internal Toshiba laptop (Portege M100) bluetooth-
> with usb interface.

if you have SCO support for HCI USB driver enabled, please disable it
and try again. Is this a vanilla 2.4.23 or do you have applied any
additional patches?

Regards

Marcel




-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?  SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users