* [Bluez-users] I-Tec Bluetooth USB -- Same Problem... [not found] <20040210175959.250411D05C8@sc8-sf-uberspam1.sourceforge.net> @ 2004-02-10 21:41 ` Dave Dev 2004-02-10 22:30 ` Marcel Holtmann 0 siblings, 1 reply; 6+ messages in thread From: Dave Dev @ 2004-02-10 21:41 UTC (permalink / raw) To: bluez-users I'm having the same problem with the I-Tec device -- got it today, put = it in -- and nothing comes up with HCICONFIG -- if I take it out, and p= ut in the EPOX device -- the EPOX device works fine -- if I take it bac= k out, and put the I-Tec back in, nothing. Let me know if (and how) I can get you info to get it working. Thanks. ____________________________________________________________ ADSL za korunu od Contactelu - nejp=F8=EDjemn=ECj=B9=ED ADSL na trhu do= ru=E8=EDme rychle a=BE k V=E1m! http://ad2.seznam.cz/redir.cgi?instance=3D70017%26url=3Dhttp://www.cont= actel.cz/adsl ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] I-Tec Bluetooth USB -- Same Problem... 2004-02-10 21:41 ` [Bluez-users] I-Tec Bluetooth USB -- Same Problem Dave Dev @ 2004-02-10 22:30 ` Marcel Holtmann 2004-03-09 6:53 ` Rudolf Matousek 0 siblings, 1 reply; 6+ messages in thread From: Marcel Holtmann @ 2004-02-10 22:30 UTC (permalink / raw) To: Dave Dev; +Cc: BlueZ Mailing List Hi Dave, > I'm having the same problem with the I-Tec device -- got it today, put it in -- and nothing comes up with HCICONFIG -- if I take it out, and put in the EPOX device -- the EPOX device works fine -- if I take it back out, and put the I-Tec back in, nothing. I need a full USB SnoopyPro of all three devices this dongles presents. With comparable timestamps of course. > Let me know if (and how) I can get you info to get it working. Is there anyone who will sponsor me a dongle of these? Regards Marcel ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] I-Tec Bluetooth USB -- Same Problem... 2004-02-10 22:30 ` Marcel Holtmann @ 2004-03-09 6:53 ` Rudolf Matousek 2004-03-09 7:51 ` Michal Semler (volny.cz) 0 siblings, 1 reply; 6+ messages in thread From: Rudolf Matousek @ 2004-03-09 6:53 UTC (permalink / raw) To: Marcel Holtmann; +Cc: bluez-users Marcel, I have lost all my patience. i-Tec is selling a dongle without any type mark. I tried to contact Broadcom in order to get more information about the chip that is in the bloody dongle. Unfortunatelly, I've sent the mail two times without any reply. Marcel, have you any method how to force Broadcom to, at least, reply my email? You have the copy of my email, is there something inconvenient? I propose to remove the i-Tec dongle from the working hardware list at the page http://www.holtmann.org/linux/bluetooth/devices.html, because it is likely that any new dongle will be based on the same chipset.At least there should be an information, that there exist another device with the same vendor type and no type mark that is not working yet. I'll probably go to my hardware shop and replace the i-Tec dongle with another one with proper vendor and type marks. I'll try to handle my complaint in a way that they sold me a dongle that I didn't wanted. Regards, Ruda Matousek -- Marcel Holtmann wrote: > Hi Dave, > > >>I'm having the same problem with the I-Tec device -- got it today, put it in -- and nothing comes up with HCICONFIG -- if I take it out, and put in the EPOX device -- the EPOX device works fine -- if I take it back out, and put the I-Tec back in, nothing. > > > I need a full USB SnoopyPro of all three devices this dongles presents. > With comparable timestamps of course. > > >>Let me know if (and how) I can get you info to get it working. > > > Is there anyone who will sponsor me a dongle of these? > > Regards > > Marcel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] I-Tec Bluetooth USB -- Same Problem... 2004-03-09 6:53 ` Rudolf Matousek @ 2004-03-09 7:51 ` Michal Semler (volny.cz) 2004-03-09 8:33 ` Rudolf Matousek 0 siblings, 1 reply; 6+ messages in thread From: Michal Semler (volny.cz) @ 2004-03-09 7:51 UTC (permalink / raw) To: bluez-users 05.03.2004 New Bluetooth kernel patch for 2.6.3 available With this patch the RFCOMM TTY device are created on demand and this gives = a=20 nice integration with devfs and udev. Some more enhancements towards full S= CO=20 audio support are made=20 and the i-Tec dongle now works like a charm. Ruda, download a patch :) Michal Dne =FAt 9. b=F8ezna 2004 07:53 Rudolf Matousek napsal(a): > Marcel, > > I have lost all my patience. i-Tec is selling a dongle without any type > mark. I tried to contact Broadcom in order to get more information about > the chip that is in the bloody dongle. Unfortunatelly, I've sent the > mail two times without any reply. Marcel, have you any method how to > force Broadcom to, at least, reply my email? You have the copy of my > email, is there something inconvenient? > > I propose to remove the i-Tec dongle from the working hardware list at > the page http://www.holtmann.org/linux/bluetooth/devices.html, because > it is likely that any new dongle will be based on the same chipset.At > least there should be an information, that there exist another device > with the same vendor type and no type mark that is not working yet. > > I'll probably go to my hardware shop and replace the i-Tec dongle with > another one with proper vendor and type marks. I'll try to handle my > complaint in a way that they sold me a dongle that I didn't wanted. > > Regards, > > > Ruda Matousek > > -- > > Marcel Holtmann wrote: > > Hi Dave, > > > >>I'm having the same problem with the I-Tec device -- got it today, put = it > >> in -- and nothing comes up with HCICONFIG -- if I take it out, and put > >> in the EPOX device -- the EPOX device works fine -- if I take it back > >> out, and put the I-Tec back in, nothing. > > > > I need a full USB SnoopyPro of all three devices this dongles presents. > > With comparable timestamps of course. > > > >>Let me know if (and how) I can get you info to get it working. > > > > Is there anyone who will sponsor me a dongle of these? > > > > Regards > > > > Marcel > > ------------------------------------------------------- > This SF.Net email is sponsored by: IBM Linux Tutorials > Free Linux tutorial presented by Daniel Robbins, President and CEO of > GenToo technologies. Learn everything from fundamentals to system > administration.http://ads.osdn.com/?ad_id=3D1470&alloc_id=3D3638&op=3Dcli= ck > _______________________________________________ > Bluez-users mailing list > Bluez-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bluez-users ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] I-Tec Bluetooth USB -- Same Problem... 2004-03-09 7:51 ` Michal Semler (volny.cz) @ 2004-03-09 8:33 ` Rudolf Matousek 2004-03-09 12:05 ` Marcel Holtmann 0 siblings, 1 reply; 6+ messages in thread From: Rudolf Matousek @ 2004-03-09 8:33 UTC (permalink / raw) To: cijoml; +Cc: bluez-users Michal, thanks for your update. I'll test it as soon as I upgrade kernel (which=20 will be soon). BTW. are we talking about the same dongle :-D. Please could you provide=20 the vendor and product IDs? Sincerely, Ruda Matousek -- Michal Semler (volny.cz) wrote: > 05.03.2004 > New Bluetooth kernel patch for 2.6.3 available > With this patch the RFCOMM TTY device are created on demand and this gi= ves a=20 > nice integration with devfs and udev. Some more enhancements towards fu= ll SCO=20 > audio support are made=20 >=20 > and the i-Tec dongle now works like a charm. >=20 > Ruda, download a patch :) >=20 > Michal >=20 > Dne =FAt 9. b=F8ezna 2004 07:53 Rudolf Matousek napsal(a): >=20 ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] I-Tec Bluetooth USB -- Same Problem... 2004-03-09 8:33 ` Rudolf Matousek @ 2004-03-09 12:05 ` Marcel Holtmann 0 siblings, 0 replies; 6+ messages in thread From: Marcel Holtmann @ 2004-03-09 12:05 UTC (permalink / raw) To: Rudolf Matousek; +Cc: cijoml, BlueZ Mailing List Hi Rudolf, > thanks for your update. I'll test it as soon as I upgrade kernel (which > will be soon). > > BTW. are we talking about the same dongle :-D. Please could you provide > the vendor and product IDs? we are talking about the same dongle. I found the problem, why it doesn't work and of course I fixed it. Here is the mailing list thread about it http://thread.gmane.org/gmane.linux.bluez.devel/1756 However don't expect to get any information from Broadcom. They are not very helpful and actually some of there stuff is very ugly. For example it is impossible to get the Apple Bluetooth mouse (Broadcom based) working with the i-Tec dongle (also Broadcom based) in HID mode. All my other HID devices are working perfect with its HID mode. Mostly all Information about HID devices and HID proxy dongles can be found here http://www.holtmann.org/linux/bluetooth/hid.html Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2004-03-09 12:05 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20040210175959.250411D05C8@sc8-sf-uberspam1.sourceforge.net>
2004-02-10 21:41 ` [Bluez-users] I-Tec Bluetooth USB -- Same Problem Dave Dev
2004-02-10 22:30 ` Marcel Holtmann
2004-03-09 6:53 ` Rudolf Matousek
2004-03-09 7:51 ` Michal Semler (volny.cz)
2004-03-09 8:33 ` Rudolf Matousek
2004-03-09 12:05 ` Marcel Holtmann
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).