[Bluez-users] HCI not working after using usb_storage

[Bluez-users] HCI not working after using usb_storage

[Forever Again]

I have a logitech mx900 mouse, which was working fine before. I'm running 
the 2.6.2 kernel on Fedora. Using the bthid daemon it was working. Then I 
tried to use a usb memory stick, and after using the usb_storage driver, my 
mouse stopped working. I check to see what was up and I noticed that my hci 
device was gone. When I try running hciconfig hci0 up, I get this:

Can't open HCI socket.: Address family not supported by protocol.

What do I need to do to get the mouse working again, and is it possible to 
use the usb_storage as well. I'm more concerned about using the mouse, but 
both would be nice.

Evan

_________________________________________________________________
Choose now from 4 levels of MSN Hotmail Extra Storage - no more account 
overload! http://click.atdmt.com/AVE/go/onm00200362ave/direct/01/



-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] HCI not working after using usb_storage

[Marcel Holtmann]

Hi Evan,

> I have a logitech mx900 mouse, which was working fine before. I'm running 
> the 2.6.2 kernel on Fedora. Using the bthid daemon it was working. Then I 
> tried to use a usb memory stick, and after using the usb_storage driver, my 
> mouse stopped working. I check to see what was up and I noticed that my hci 
> device was gone. When I try running hciconfig hci0 up, I get this:
> 
> Can't open HCI socket.: Address family not supported by protocol.
> 
> What do I need to do to get the mouse working again, and is it possible to 
> use the usb_storage as well. I'm more concerned about using the mouse, but 
> both would be nice.

check your log files for a kernel oops or other specific messages from
the USB bus. If you really think that this only happen in conjunction
with the USB storage driver then you should post this to the USB mailing
list.

Regards

Marcel




-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] HCI not working after using usb_storage

[Forever Again]

oh, I probably should've mentioned this, but this is an HP laptop, with 
their built in bluetooth, which (I believe) uses a USB hub.



>From: Marcel Holtmann <marcel@holtmann.org>
>To: Forever Again <erics_trip@hotmail.com>
>CC: BlueZ Mailing List <bluez-users@lists.sourceforge.net>
>Subject: Re: [Bluez-users] HCI not working after using usb_storage
>Date: Sat, 14 Feb 2004 00:42:31 +0100
>
>Hi Evan,
>
> > I have a logitech mx900 mouse, which was working fine before. I'm 
>running
> > the 2.6.2 kernel on Fedora. Using the bthid daemon it was working. Then 
>I
> > tried to use a usb memory stick, and after using the usb_storage driver, 
>my
> > mouse stopped working. I check to see what was up and I noticed that my 
>hci
> > device was gone. When I try running hciconfig hci0 up, I get this:
> >
> > Can't open HCI socket.: Address family not supported by protocol.
> >
> > What do I need to do to get the mouse working again, and is it possible 
>to
> > use the usb_storage as well. I'm more concerned about using the mouse, 
>but
> > both would be nice.
>
>check your log files for a kernel oops or other specific messages from
>the USB bus. If you really think that this only happen in conjunction
>with the USB storage driver then you should post this to the USB mailing
>list.
>
>Regards
>
>Marcel
>
>

_________________________________________________________________
Let the advanced features & services of MSN Internet Software maximize your 
online time. http://click.atdmt.com/AVE/go/onm00200363ave/direct/01/

Re: [Bluez-users] HCI not working after using usb_storage

[Forever Again]

I apologize to everyone ... my first day on the list, and I wasted your 
time. For some reason, after I had added the usb_storage, the power to my 
bluetooth went off. Or maybe I turned it off by accident. I turned it back 
on and hciconfig found my device. I'll try to be less hasty before posting 
to the list about problems like that.
Evan




>From: Marcel Holtmann <marcel@holtmann.org>
>To: Forever Again <erics_trip@hotmail.com>
>CC: BlueZ Mailing List <bluez-users@lists.sourceforge.net>
>Subject: Re: [Bluez-users] HCI not working after using usb_storage
>Date: Sat, 14 Feb 2004 00:42:31 +0100
>
>Hi Evan,
>
> > I have a logitech mx900 mouse, which was working fine before. I'm 
>running
> > the 2.6.2 kernel on Fedora. Using the bthid daemon it was working. Then 
>I
> > tried to use a usb memory stick, and after using the usb_storage driver, 
>my
> > mouse stopped working. I check to see what was up and I noticed that my 
>hci
> > device was gone. When I try running hciconfig hci0 up, I get this:
> >
> > Can't open HCI socket.: Address family not supported by protocol.
> >
> > What do I need to do to get the mouse working again, and is it possible 
>to
> > use the usb_storage as well. I'm more concerned about using the mouse, 
>but
> > both would be nice.
>
>check your log files for a kernel oops or other specific messages from
>the USB bus. If you really think that this only happen in conjunction
>with the USB storage driver then you should post this to the USB mailing
>list.
>
>Regards
>
>Marcel
>
>
>
>
>-------------------------------------------------------
>SF.Net is sponsored by: Speed Start Your Linux Apps Now.
>Build and deploy apps & Web services for Linux with
>a free DVD software kit from IBM. Click Now!
>http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
>_______________________________________________
>Bluez-users mailing list
>Bluez-users@lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/bluez-users

_________________________________________________________________
Optimize your Internet experience to the max with the new MSN Premium 
Internet Software. http://click.atdmt.com/AVE/go/onm00200359ave/direct/01/