* [Bluez-devel] dumping/debuging ttySX ...
@ 2004-02-27 8:45 Bitterlich Jean-Yves ICM MP PD TI 10
2004-02-27 11:47 ` Marcel Holtmann
0 siblings, 1 reply; 2+ messages in thread
From: Bitterlich Jean-Yves ICM MP PD TI 10 @ 2004-02-27 8:45 UTC (permalink / raw)
To: 'bluez-devel@lists.sourceforge.net'
Hi,
I'm currently adapting bluez to run a bt chip via uart. it seems that
modifying hciattach initialization code might be enough. however i'm having
trouble after initialization whenever the driver take the socket over
(N_HCI). for some reason, the chip sends lots of "invalid packet events" and
"startup events".
before going further, i need to know what is sent over uart (i.e. every
single byte in each direction). hcidump seems to be a bit too high-level.
what would you recommend to spy transparently the ttyS0 ?
thanx for any help
--JYB
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Bluez-devel] dumping/debuging ttySX ...
2004-02-27 8:45 [Bluez-devel] dumping/debuging ttySX Bitterlich Jean-Yves ICM MP PD TI 10
@ 2004-02-27 11:47 ` Marcel Holtmann
0 siblings, 0 replies; 2+ messages in thread
From: Marcel Holtmann @ 2004-02-27 11:47 UTC (permalink / raw)
To: Bitterlich Jean-Yves ICM MP PD TI 10
Cc: 'bluez-devel@lists.sourceforge.net'
Hi Jean-Yves,
> I'm currently adapting bluez to run a bt chip via uart. it seems that
> modifying hciattach initialization code might be enough. however i'm having
> trouble after initialization whenever the driver take the socket over
> (N_HCI). for some reason, the chip sends lots of "invalid packet events" and
> "startup events".
>
> before going further, i need to know what is sent over uart (i.e. every
> single byte in each direction). hcidump seems to be a bit too high-level.
> what would you recommend to spy transparently the ttyS0 ?
what kind of Bluetooth chip is it that you use?
Regards
Marcel
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-02-27 11:47 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-02-27 8:45 [Bluez-devel] dumping/debuging ttySX Bitterlich Jean-Yves ICM MP PD TI 10
2004-02-27 11:47 ` Marcel Holtmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox