[Bluez-users] latest modules.conf settings for bluez

[Bluez-users] latest modules.conf settings for bluez

[Michal Semler (volny.cz)]

Hi Marcel,

I am sending my latest modules.conf. Can you look at it and tell me if it's 
complete modules.conf for BlueZ?

#BlueZ settings
alias net-pf-31 bluez
alias bt-proto-0 l2cap
alias bt-proto-2 sco
alias bt-proto-4 bnep
alias tty-ldisc-15 hci_uart
alias char-major-10-250 hci_vhci
alias bt-proto-3 rfcomm
alias char-major-10-223 uinput
above uinput mousedev keybdev
above bluez hci_usb
post-install hci_usb /sbin/hciconfig hci0 lm master

Michal


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] latest modules.conf settings for bluez

[Marcel Holtmann]

Hi Michal,

> I am sending my latest modules.conf. Can you look at it and tell me if it's 
> complete modules.conf for BlueZ?
> 
> #BlueZ settings
> alias net-pf-31 bluez
> alias bt-proto-0 l2cap
> alias bt-proto-2 sco
> alias bt-proto-4 bnep
> alias tty-ldisc-15 hci_uart
> alias char-major-10-250 hci_vhci
> alias bt-proto-3 rfcomm
> alias char-major-10-223 uinput
> above uinput mousedev keybdev
> above bluez hci_usb

I don't know what "above" do. The bluez and hci_usb should be loaded if
the dongle is plugged in by hotplug.

> post-install hci_usb /sbin/hciconfig hci0 lm master

This is not a good idea and does not really work. Put it into hcid.conf,
but I prefer leaving it "slave,accept". The bthid will itself set to
master mode.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] latest modules.conf settings for bluez

[Michal Semler (volny.cz)]

Dne st 17. b=F8ezna 2004 13:18 jste napsal(a):
> Hi Michal,
>
> > I am sending my latest modules.conf. Can you look at it and tell me if
> > it's complete modules.conf for BlueZ?
> >
> > #BlueZ settings
> > alias net-pf-31 bluez
> > alias bt-proto-0 l2cap
> > alias bt-proto-2 sco
> > alias bt-proto-4 bnep
> > alias tty-ldisc-15 hci_uart
> > alias char-major-10-250 hci_vhci
> > alias bt-proto-3 rfcomm
> > alias char-major-10-223 uinput
> > above uinput mousedev keybdev
> > above bluez hci_usb
>
> I don't know what "above" do. The bluez and hci_usb should be loaded if
> the dongle is plugged in by hotplug.

above is similiar to pre-install bluez modprobe -k hci_usb :)

it's shorter :D
I don't really like hotplug...and I nor don't need it, coz I use BT dongle=
=20
everytime :)

>
> > post-install hci_usb /sbin/hciconfig hci0 lm master
>
> This is not a good idea and does not really work. Put it into hcid.conf,
> but I prefer leaving it "slave,accept". The bthid will itself set to
> master mode.

Thanks removing :)

Michal

>
> Regards
>
> Marcel


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users