[Bluez-users] sendmsg: No buffer space available

[Bluez-users] sendmsg: No buffer space available

[Geert Geurts]

Hello, I've got a problem with my usb-dongle...
as soon as I put request too much traffic over ppp (a webpage is too
much, ping is no problem) the connection is broken...
when I try to ping over the ppp after I got the timeout on my palm, I
get sendmsg: No buffer space available 
when I do the same when I didn't get the timeout message yet I get a
normal reply...

I found out that I have the same problem when I try connecting via
normal cradle/cable...
no matter witch speed I set! well tried 19200 without success...

I'm using gentoo linux
devfs and usbfs
2.4.23-ck3-mh2 kernel
bluez-kernel-2.3
bluez-libs-2.4
bluez-pan-1.1
bluez-sdp-1.5
bluez-utils-2.3-r1



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] sendmsg: No buffer space available

[Marcel Holtmann]

Hi Geert,

> Hello, I've got a problem with my usb-dongle...
> as soon as I put request too much traffic over ppp (a webpage is too
> much, ping is no problem) the connection is broken...
> when I try to ping over the ppp after I got the timeout on my palm, I
> get sendmsg: No buffer space available 
> when I do the same when I didn't get the timeout message yet I get a
> normal reply...
> 
> I found out that I have the same problem when I try connecting via
> normal cradle/cable...
> no matter witch speed I set! well tried 19200 without success...
> 
> I'm using gentoo linux
> devfs and usbfs
> 2.4.23-ck3-mh2 kernel
> bluez-kernel-2.3
> bluez-libs-2.4
> bluez-pan-1.1
> bluez-sdp-1.5
> bluez-utils-2.3-r1

don't use bluez-kernel-2.3, because my latest -mh patch should be
enough.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users