[Bluez-devel] hid2hci not working with Logitech diNovo

[Bluez-devel] hid2hci not working with Logitech diNovo

[Julian Scheel]

Hi all,

I tried to switch my diNovo set to hci-mode with hid2hci from current cvs, but 
it gives me this error message:
Switching device 046d:c704 to HCI mode failed (Invalid argument)

Kernel is 2.6.4 + mh2-patches.
I have enabled OHCI-USB-Support, Bluetooth, HCI_USB and full HID support.
Any ideas?

Best regards,
Julian


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] hid2hci not working with Logitech diNovo

[Marcel Holtmann]

Hi Julian,

> I tried to switch my diNovo set to hci-mode with hid2hci from current cvs, but 
> it gives me this error message:
> Switching device 046d:c704 to HCI mode failed (Invalid argument)
> 
> Kernel is 2.6.4 + mh2-patches.
> I have enabled OHCI-USB-Support, Bluetooth, HCI_USB and full HID support.

I have seen this error with 2.6, but the switching still works. Check
with hciconfig if you got your Bluetooth device.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] hid2hci not working with Logitech diNovo

[Julian Scheel]

Hi Marcel,

> I have seen this error with 2.6, but the switching still works. Check
> with hciconfig if you got your Bluetooth device.

thanks for your quick reply, but the device isn't listed with hciconfig, and 
it doesn't stops working, which I assume should happen after switching this, 
but before loading the bluetooth hid-drivers, shouldn't it?

Best regards,
Julian

Re: [Bluez-devel] hid2hci not working with Logitech diNovo

[Marcel Holtmann]

Hi Julian,

> > I have seen this error with 2.6, but the switching still works. Check
> > with hciconfig if you got your Bluetooth device.
> 
> thanks for your quick reply, but the device isn't listed with hciconfig, and 
> it doesn't stops working, which I assume should happen after switching this, 
> but before loading the bluetooth hid-drivers, shouldn't it?

testing with the latest 2.6.5-rc3-bk1 it reports success, but after that
my kernel freezes. I have not enough time to dig deep enough into it, so
feel free to provide a patch if you found the problem.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel