* [Bluez-devel] Palm problem
@ 2004-04-15 20:30 Lan Zhang
2004-04-16 23:52 ` Marcel Holtmann
0 siblings, 1 reply; 2+ messages in thread
From: Lan Zhang @ 2004-04-15 20:30 UTC (permalink / raw)
To: bluez-devel
[-- Attachment #1: Type: text/plain, Size: 500 bytes --]
Hi, Marcel:
Thanks for your answer before, I bought a new dongle and the problem is
gone.
The problem now is the palm i705, I used BtPrint try to send data to my
linux box, and of course I set my linux class to printer, the problem
looks happened in rfcomm level. I used hcidump to catch the stream data,
and it is been attached. I think it is rfcomm channel problem. Could you
take several min to look at the file and give me some suggestion?
Thanks a lot.
Regards,
Lan
[-- Attachment #2: hcidump.log --]
[-- Type: application/octet-stream, Size: 5571 bytes --]
HCIDump - HCI packet analyzer ver 1.5
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request(0x04) plen 10
13 4A 0D C2 50 00 14 01 10 01
< HCI Command: Accept Connection Request(0x01|0x0009) plen 7
13 4A 0D C2 50 00 01
> HCI Event: Command Status(0x0f) plen 4
00 01 09 04
> HCI Event: Connect Complete(0x03) plen 11
00 28 00 13 4A 0D C2 50 00 01 00
< HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4
28 00 0E 00
> HCI Event: Max Slots Change(0x1b) plen 3
28 00 05
> HCI Event: Command Complete(0x0e) plen 6
01 0D 08 00 28 00
< HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4
28 00 18 CC
> HCI Event: Command Status(0x0f) plen 4
00 01 0F 04
> HCI Event: Connection Packet Type Changed(0x1d) plen 5
00 28 00 18 CC
> ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< ACL data: handle 0x0028 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
> HCI Event: Number of Completed Packets(0x13) plen 5
01 28 00 01 00
> ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
< ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
> HCI Event: Number of Completed Packets(0x13) plen 5
01 28 00 01 00
> HCI Event: Number of Completed Packets(0x13) plen 5
01 28 00 01 00
> ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0028 flags 0x02 dlen 17
> ACL data: handle 0x0028 flags 0x01 dlen 6
L2CAP(d): cid 0x40 len 19 [psm 1]
SDP SS Req: tid 0x0 len 0xe
pat uuid-16 0x1105 (OBEXObjPush) uuid-16 0x0100 (L2CAP) uuid-16 0x0003 (RFCOMM)
max 0x1
cont 00
< ACL data: handle 0x0028 flags 0x02 dlen 18
L2CAP(d): cid 0x40 len 14 [psm 1]
SDP SS Rsp: tid 0x0 len 0x9
cur 0x1 tot 0x1 hndl 0x804d558
cont 00
> HCI Event: Number of Completed Packets(0x13) plen 5
01 28 00 01 00
> ACL data: handle 0x0028 flags 0x02 dlen 17
> ACL data: handle 0x0028 flags 0x01 dlen 4
L2CAP(d): cid 0x40 len 17 [psm 1]
SDP SA Req: tid 0x1 len 0xc
hndl 0x804d558
max 0xffff
aid(s) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 0x0028 flags 0x02 dlen 36
L2CAP(d): cid 0x40 len 32 [psm 1]
SDP SA Rsp: tid 0x1 len 0x1b
cnt 0x18
aid 0x0004 (ProtocolDescList)
uuid-16 0x0100 (L2CAP)
uuid-16 0x0003 (RFCOMM) uint 0x4
uuid-16 0x0008 (OBEX)
cont 00
> HCI Event: Number of Completed Packets(0x13) plen 5
01 28 00 01 00
> ACL data: handle 0x0028 flags 0x02 dlen 17
> ACL data: handle 0x0028 flags 0x01 dlen 4
L2CAP(d): cid 0x40 len 17 [psm 1]
SDP SA Req: tid 0x2 len 0xc
hndl 0x804d558
max 0xffff
aid(s) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 0x0028 flags 0x02 dlen 36
L2CAP(d): cid 0x40 len 32 [psm 1]
SDP SA Rsp: tid 0x2 len 0x1b
cnt 0x18
aid 0x0004 (ProtocolDescList)
uuid-16 0x0100 (L2CAP)
uuid-16 0x0003 (RFCOMM) uint 0x4
uuid-16 0x0008 (OBEX)
cont 00
> HCI Event: Number of Completed Packets(0x13) plen 5
01 28 00 01 00
> ACL data: handle 0x0028 flags 0x02 dlen 17
> ACL data: handle 0x0028 flags 0x01 dlen 4
L2CAP(d): cid 0x40 len 17 [psm 1]
SDP SA Req: tid 0x3 len 0xc
hndl 0x804d558
max 0xffff
aid(s) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 0x0028 flags 0x02 dlen 36
L2CAP(d): cid 0x40 len 32 [psm 1]
SDP SA Rsp: tid 0x3 len 0x1b
cnt 0x18
aid 0x0004 (ProtocolDescList)
uuid-16 0x0100 (L2CAP)
uuid-16 0x0003 (RFCOMM) uint 0x4
uuid-16 0x0008 (OBEX)
cont 00
> HCI Event: Number of Completed Packets(0x13) plen 5
01 28 00 01 00
> ACL data: handle 0x0028 flags 0x02 dlen 21
L2CAP(d): cid 0x40 len 17 [psm 1]
SDP SA Req: tid 0x4 len 0xc
hndl 0x804d558
max 0xffff
aid(s) 0x0303 ((null))
cont 00
< ACL data: handle 0x0028 flags 0x02 dlen 31
L2CAP(d): cid 0x40 len 27 [psm 1]
SDP SA Rsp: tid 0x4 len 0x16
cnt 0x13
aid 0x0303 (unknown)
uint 0x1 uint 0x2 uint 0x3 uint 0x4 uint 0x5 uint 0x6
cont 00
> HCI Event: Number of Completed Packets(0x13) plen 5
01 28 00 01 00
> ACL data: handle 0x0028 flags 0x02 dlen 21
L2CAP(d): cid 0x40 len 17 [psm 1]
SDP SA Req: tid 0x5 len 0xc
hndl 0x804d558
max 0xffff
aid(s) 0x0303 ((null))
cont 00
< ACL data: handle 0x0028 flags 0x02 dlen 31
L2CAP(d): cid 0x40 len 27 [psm 1]
SDP SA Rsp: tid 0x5 len 0x16
cnt 0x13
aid 0x0303 (unknown)
uint 0x1 uint 0x2 uint 0x3 uint 0x4 uint 0x5 uint 0x6
cont 00
> HCI Event: Number of Completed Packets(0x13) plen 5
01 28 00 01 00
> ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets(0x13) plen 5
01 28 00 01 00
> HCI Event: Disconn Complete(0x05) plen 4
00 28 00 13
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [Bluez-devel] Palm problem
2004-04-15 20:30 [Bluez-devel] Palm problem Lan Zhang
@ 2004-04-16 23:52 ` Marcel Holtmann
0 siblings, 0 replies; 2+ messages in thread
From: Marcel Holtmann @ 2004-04-16 23:52 UTC (permalink / raw)
To: Lan Zhang; +Cc: BlueZ Mailing List
Hi Lan,
> Thanks for your answer before, I bought a new dongle and the problem is
> gone.
>
> The problem now is the palm i705, I used BtPrint try to send data to my
> linux box, and of course I set my linux class to printer, the problem
> looks happened in rfcomm level. I used hcidump to catch the stream data,
> and it is been attached. I think it is rfcomm channel problem. Could you
> take several min to look at the file and give me some suggestion?
the problem is that the Palm don't likes the values that it gets from
its SDP request and it don't even tries to open a RFCOMM channel.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-04-16 23:52 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-04-15 20:30 [Bluez-devel] Palm problem Lan Zhang
2004-04-16 23:52 ` Marcel Holtmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox