* [Bluez-users] Bluez+2.6+Logitech bluetooth
@ 2004-05-15 16:39 de Laurent
2004-05-16 6:10 ` Charles Bueche
2004-05-16 7:35 ` Frederic Detienne
0 siblings, 2 replies; 11+ messages in thread
From: de Laurent @ 2004-05-15 16:39 UTC (permalink / raw)
To: bluez-users
Hi!
I'll try to describe my problem. Please forgive me if the answer is
simple, but I have been searching for a week for the solution...
So, I bought Logitech Desktop MX for Bluetooth (mouse, keyboard and
bluetooth hub as you probably know).=20
My distro is Slackware 9.1.
Kernel 2.6.6 (patched from 2.6.4 to 2.6.5 and to 2.6.6).
I patched the kernel first(as above). Then I downloaded the patch
from BlueZ site: patch-2.6.6-mh1 (all without errors). I added
aliases to modules.conf:
alias net-pf-31 bluez
alias bt-proto-0 l2cap
(and others for rfcomm, bnep and sco)
This is how my /proc/.../devices looks like:
T: Bus=3D02 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 M=
xCh=3D 2
B: Alloc=3D 0/900 us ( 0%), #Int=3D 0, #Iso=3D 0
D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06
S: Manufacturer=3DLinux 2.6.6-mh1 uhci_hcd
S: Product=3DVIA Technologies, Inc. USB (#2)
S: SerialNumber=3D0000:00:11.3
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D255ms
T: Bus=3D01 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 M=
xCh=3D 2
B: Alloc=3D247/900 us (27%), #Int=3D 3, #Iso=3D 0
D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06
S: Manufacturer=3DLinux 2.6.6-mh1 uhci_hcd
S: Product=3DVIA Technologies, Inc. USB
S: SerialNumber=3D0000:00:11.2
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D255ms
T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D01 Cnt=3D02 Dev#=3D 3 Spd=3D12 M=
xCh=3D 2
D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D0451 ProdID=3D2036 Rev=3D 1.01
S: Product=3DGeneral Purpose USB Hub
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3Da0 MxPwr=3D100mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 1 Ivl=3D255ms
T: Bus=3D01 Lev=3D02 Prnt=3D03 Port=3D00 Cnt=3D01 Dev#=3D 4 Spd=3D1.5 M=
xCh=3D 0
D: Ver=3D 1.10 Cls=3D00(>ifc ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D046d ProdID=3Dc703 Rev=3D24.04
S: Manufacturer=3DLogitech
S: Product=3DUSB Receiver
S: SerialNumber=3D0C58B6
C:* #Ifs=3D 2 Cfg#=3D 1 Atr=3Da0 MxPwr=3D 98mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D03(HID ) Sub=3D01 Prot=3D01 Driver=
=3Dhid
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 8 Ivl=3D10ms
I: If#=3D 1 Alt=3D 0 #EPs=3D 1 Cls=3D03(HID ) Sub=3D01 Prot=3D02 Driver=
=3Dhid
E: Ad=3D82(I) Atr=3D03(Int.) MxPS=3D 8 Ivl=3D10ms
my lsmod give:
Module Size Used by
l2cap 21120 0=20
bluetooth 41956 1 l2cap
usbhid 30336 0=20
usblp 10944 0=20
uhci_hcd 29064 0=20
usbcore 104084 5 usbhid,usblp,uhci_hcd
and
hci_usb
sound modules, and so on.
If I tried to modprobe bluez (before modprobe bluetooth and l2cap) I=20
received "no bluez find"...
I did of course first compiled newest bluez-libs, utils and hciemu.
When I tried to hciconfig hci0 up it shows:
Can't get device info: No such device
When I tried to hid2hci, it hangs and I can't use the keyboard and
mouse.
I can use them normaly even without bluetooth, via usb.
This is my messages:
May 15 15:23:09 smith kernel: usbcore: registered new driver usbfs
May 15 15:23:09 smith kernel: usbcore: registered new driver hub
May 15 15:23:09 smith kernel: USB Universal Host Controller
Interface driver v2.2
May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.2: VIA
Technologies, Inc. USB
May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.2: irq 5, io base
0000d800
May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.2: new USB bus
registered, assigned bus number 1
May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.2: detected 2 ports
May 15 15:23:09 smith kernel: usb usb1: Product: VIA Technologies,
Inc. USB
May 15 15:23:09 smith kernel: usb usb1: Manufacturer: Linux
2.6.6-mh1 uhci_hcd
May 15 15:23:09 smith kernel: usb usb1: SerialNumber: 0000:00:11.2
May 15 15:23:09 smith kernel: hub 1-0:1.0: USB hub found
May 15 15:23:09 smith kernel: hub 1-0:1.0: 2 ports detected
May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.3: VIA
Technologies, Inc. USB (#2)
May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.3: irq 5, io base
0000dc00
May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.3: new USB bus
registered, assigned bus number 2
May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.3: detected 2 ports
May 15 15:23:09 smith kernel: usb usb2: Product: VIA Technologies,
Inc. USB (#2)
May 15 15:23:09 smith kernel: usb usb2: Manufacturer: Linux
2.6.6-mh1 uhci_hcd
May 15 15:23:09 smith kernel: usb usb2: SerialNumber: 0000:00:11.3
May 15 15:23:09 smith kernel: hub 2-0:1.0: USB hub found
May 15 15:23:09 smith kernel: hub 2-0:1.0: 2 ports detected
May 15 15:23:09 smith kernel: usb 1-1: new full speed USB device
using address 2
May 15 15:23:09 smith kernel: usb 1-1: Product: DeskJet 930C
May 15 15:23:09 smith kernel: usb 1-1: Manufacturer: Hewlett-Packard
May 15 15:23:09 smith kernel: usb 1-1: SerialNumber: ES05F1804RJJ
May 15 15:23:09 smith kernel: drivers/usb/class/usblp.c: usblp0: USB
Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1204
May 15 15:23:09 smith kernel: usbcore: registered new driver usblp
May 15 15:23:09 smith kernel: drivers/usb/class/usblp.c: v0.13: USB
Printer Device Class driver
May 15 15:23:09 smith kernel: usb 1-2: new full speed USB device
using address 3
May 15 15:23:09 smith kernel: usb 1-2: Product: General Purpose USB Hub
May 15 15:23:09 smith kernel: hub 1-2:1.0: USB hub found
May 15 15:23:09 smith kernel: hub 1-2:1.0: 2 ports detected
May 15 15:23:09 smith kernel: usb 1-2.1: new low speed USB device
using address 4
May 15 15:23:09 smith kernel: usb 1-2.1: Product: USB Receiver
May 15 15:23:09 smith kernel: usb 1-2.1: Manufacturer: Logitech
May 15 15:23:09 smith kernel: usb 1-2.1: SerialNumber: 0C58B6
May 15 15:23:09 smith modprobe: FATAL: Module usbhid already in kernel.=20
May 15 15:23:09 smith usb.agent[861]: ... can't load module usbhid
May 15 15:23:09 smith usb.agent[861]: missing kernel or user mode
driver usbhid=20
May 15 15:23:09 smith modprobe: FATAL: Module mousedev not found.=20
May 15 15:23:09 smith kernel: usbcore: registered new driver hiddev
May 15 15:23:09 smith kernel: input: USB HID v1.10 Keyboard
[Logitech USB Receiver] on usb-0000:00:11.2-2.1
May 15 15:23:09 smith modprobe: FATAL: Module keybdev not found.=20
May 15 15:23:09 smith kernel: input,hiddev96: USB HID v1.10 Mouse
[Logitech USB Receiver] on usb-0000:00:11.2-2.1
May 15 15:23:09 smith kernel: usbcore: registered new driver hid
May 15 15:23:09 smith kernel: drivers/usb/input/hid-core.c: v2.0:USB
HID core driver
And my question is:
What do I wrong? Why doesn=B4t it work?=20
Waldemar
-------------------------------------------------------
This SF.Net email is sponsored by: SourceForge.net Broadband
Sign-up now for SourceForge Broadband and get the fastest
6.0/768 connection for only $19.95/mo for the first 3 months!
http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Bluez-users] Bluez+2.6+Logitech bluetooth
2004-05-15 16:39 [Bluez-users] Bluez+2.6+Logitech bluetooth de Laurent
@ 2004-05-16 6:10 ` Charles Bueche
2004-05-16 11:54 ` Marcel Holtmann
2004-05-16 7:35 ` Frederic Detienne
1 sibling, 1 reply; 11+ messages in thread
From: Charles Bueche @ 2004-05-16 6:10 UTC (permalink / raw)
To: bluez-users
Hi,
you may want to try my cookbook at
http://www.bueche.ch/comp/mx900/mx900.html
Regs,
Charles
On Sat, 15 May 2004 18:39:03 +0200
de Laurent <de_laurent@o2.pl> wrote:
> Hi!
> I'll try to describe my problem. Please forgive me if the answer is
> simple, but I have been searching for a week for the solution...
>=20
> So, I bought Logitech Desktop MX for Bluetooth (mouse, keyboard and
> bluetooth hub as you probably know).=20
> My distro is Slackware 9.1.
> Kernel 2.6.6 (patched from 2.6.4 to 2.6.5 and to 2.6.6).
>=20
> I patched the kernel first(as above). Then I downloaded the patch
> from BlueZ site: patch-2.6.6-mh1 (all without errors). I added
> aliases to modules.conf:
> alias net-pf-31 bluez
> alias bt-proto-0 l2cap
> (and others for rfcomm, bnep and sco)
> This is how my /proc/.../devices looks like:
>=20
> T: Bus=3D02 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 M=
xCh=3D 2
> B: Alloc=3D 0/900 us ( 0%), #Int=3D 0, #Iso=3D 0
> D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
> P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06
> S: Manufacturer=3DLinux 2.6.6-mh1 uhci_hcd
> S: Product=3DVIA Technologies, Inc. USB (#2)
> S: SerialNumber=3D0000:00:11.3
> C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
> I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
> E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D255ms
>=20
> T: Bus=3D01 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 M=
xCh=3D 2
> B: Alloc=3D247/900 us (27%), #Int=3D 3, #Iso=3D 0
> D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
> P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06
> S: Manufacturer=3DLinux 2.6.6-mh1 uhci_hcd
> S: Product=3DVIA Technologies, Inc. USB
> S: SerialNumber=3D0000:00:11.2
> C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
> I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
> E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D255ms
>=20
> T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D01 Cnt=3D02 Dev#=3D 3 Spd=3D12 M=
xCh=3D 2
> D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
> P: Vendor=3D0451 ProdID=3D2036 Rev=3D 1.01
> S: Product=3DGeneral Purpose USB Hub
> C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3Da0 MxPwr=3D100mA
> I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
> E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 1 Ivl=3D255ms
>=20
> T: Bus=3D01 Lev=3D02 Prnt=3D03 Port=3D00 Cnt=3D01 Dev#=3D 4 Spd=3D1.5 M=
xCh=3D 0
> D: Ver=3D 1.10 Cls=3D00(>ifc ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
> P: Vendor=3D046d ProdID=3Dc703 Rev=3D24.04
> S: Manufacturer=3DLogitech
> S: Product=3DUSB Receiver
> S: SerialNumber=3D0C58B6
> C:* #Ifs=3D 2 Cfg#=3D 1 Atr=3Da0 MxPwr=3D 98mA
> I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D03(HID ) Sub=3D01 Prot=3D01 Driver=
=3Dhid
> E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 8 Ivl=3D10ms
> I: If#=3D 1 Alt=3D 0 #EPs=3D 1 Cls=3D03(HID ) Sub=3D01 Prot=3D02 Driver=
=3Dhid
> E: Ad=3D82(I) Atr=3D03(Int.) MxPS=3D 8 Ivl=3D10ms
>=20
> my lsmod give:
> Module Size Used by
> l2cap 21120 0=20
> bluetooth 41956 1 l2cap
> usbhid 30336 0=20
> usblp 10944 0=20
> uhci_hcd 29064 0=20
> usbcore 104084 5 usbhid,usblp,uhci_hcd
> and
> hci_usb
> sound modules, and so on.
> If I tried to modprobe bluez (before modprobe bluetooth and l2cap) I=20
> received "no bluez find"...
> I did of course first compiled newest bluez-libs, utils and hciemu.
> When I tried to hciconfig hci0 up it shows:
> Can't get device info: No such device
> When I tried to hid2hci, it hangs and I can't use the keyboard and
> mouse.
> I can use them normaly even without bluetooth, via usb.
> This is my messages:
> May 15 15:23:09 smith kernel: usbcore: registered new driver usbfs
> May 15 15:23:09 smith kernel: usbcore: registered new driver hub
> May 15 15:23:09 smith kernel: USB Universal Host Controller
> Interface driver v2.2
> May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.2: VIA
> Technologies, Inc. USB
> May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.2: irq 5, io base
> 0000d800
> May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.2: new USB bus
> registered, assigned bus number 1
> May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.2: detected 2 ports
> May 15 15:23:09 smith kernel: usb usb1: Product: VIA Technologies,
> Inc. USB
> May 15 15:23:09 smith kernel: usb usb1: Manufacturer: Linux
> 2.6.6-mh1 uhci_hcd
> May 15 15:23:09 smith kernel: usb usb1: SerialNumber: 0000:00:11.2
> May 15 15:23:09 smith kernel: hub 1-0:1.0: USB hub found
> May 15 15:23:09 smith kernel: hub 1-0:1.0: 2 ports detected
> May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.3: VIA
> Technologies, Inc. USB (#2)
> May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.3: irq 5, io base
> 0000dc00
> May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.3: new USB bus
> registered, assigned bus number 2
> May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.3: detected 2 ports
> May 15 15:23:09 smith kernel: usb usb2: Product: VIA Technologies,
> Inc. USB (#2)
> May 15 15:23:09 smith kernel: usb usb2: Manufacturer: Linux
> 2.6.6-mh1 uhci_hcd
> May 15 15:23:09 smith kernel: usb usb2: SerialNumber: 0000:00:11.3
> May 15 15:23:09 smith kernel: hub 2-0:1.0: USB hub found
> May 15 15:23:09 smith kernel: hub 2-0:1.0: 2 ports detected
> May 15 15:23:09 smith kernel: usb 1-1: new full speed USB device
> using address 2
> May 15 15:23:09 smith kernel: usb 1-1: Product: DeskJet 930C
> May 15 15:23:09 smith kernel: usb 1-1: Manufacturer: Hewlett-Packard
> May 15 15:23:09 smith kernel: usb 1-1: SerialNumber: ES05F1804RJJ
> May 15 15:23:09 smith kernel: drivers/usb/class/usblp.c: usblp0: USB
> Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1204
> May 15 15:23:09 smith kernel: usbcore: registered new driver usblp
> May 15 15:23:09 smith kernel: drivers/usb/class/usblp.c: v0.13: USB
> Printer Device Class driver
> May 15 15:23:09 smith kernel: usb 1-2: new full speed USB device
> using address 3
> May 15 15:23:09 smith kernel: usb 1-2: Product: General Purpose USB
> Hub May 15 15:23:09 smith kernel: hub 1-2:1.0: USB hub found
> May 15 15:23:09 smith kernel: hub 1-2:1.0: 2 ports detected
> May 15 15:23:09 smith kernel: usb 1-2.1: new low speed USB device
> using address 4
> May 15 15:23:09 smith kernel: usb 1-2.1: Product: USB Receiver
> May 15 15:23:09 smith kernel: usb 1-2.1: Manufacturer: Logitech
> May 15 15:23:09 smith kernel: usb 1-2.1: SerialNumber: 0C58B6
> May 15 15:23:09 smith modprobe: FATAL: Module usbhid already in
> kernel. May 15 15:23:09 smith usb.agent[861]: ... can't load module
> usbhid May 15 15:23:09 smith usb.agent[861]: missing kernel or user
> mode driver usbhid=20
> May 15 15:23:09 smith modprobe: FATAL: Module mousedev not found.=20
> May 15 15:23:09 smith kernel: usbcore: registered new driver hiddev
> May 15 15:23:09 smith kernel: input: USB HID v1.10 Keyboard
> [Logitech USB Receiver] on usb-0000:00:11.2-2.1
> May 15 15:23:09 smith modprobe: FATAL: Module keybdev not found.=20
> May 15 15:23:09 smith kernel: input,hiddev96: USB HID v1.10 Mouse
> [Logitech USB Receiver] on usb-0000:00:11.2-2.1
> May 15 15:23:09 smith kernel: usbcore: registered new driver hid
> May 15 15:23:09 smith kernel: drivers/usb/input/hid-core.c: v2.0:USB
> HID core driver
>=20
> And my question is:
> What do I wrong? Why doesn=B4t it work?=20
>=20
> Waldemar
>=20
>=20
>=20
>=20
> -------------------------------------------------------
> This SF.Net email is sponsored by: SourceForge.net Broadband
> Sign-up now for SourceForge Broadband and get the fastest
> 6.0/768 connection for only $19.95/mo for the first 3 months!
> http://ads.osdn.com/?ad_id%62&alloc_ida84&op=CCk
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
--=20
Charles Bueche <charles@bueche.ch>
sand, snow, wave, wind and net -surfer
-------------------------------------------------------
This SF.Net email is sponsored by: SourceForge.net Broadband
Sign-up now for SourceForge Broadband and get the fastest
6.0/768 connection for only $19.95/mo for the first 3 months!
http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Bluez-users] Bluez+2.6+Logitech bluetooth
2004-05-16 6:10 ` Charles Bueche
@ 2004-05-16 11:54 ` Marcel Holtmann
2004-05-16 15:49 ` Charles Bueche
2004-05-17 20:43 ` Di Pietro Nicolas
0 siblings, 2 replies; 11+ messages in thread
From: Marcel Holtmann @ 2004-05-16 11:54 UTC (permalink / raw)
To: Charles Bueche; +Cc: BlueZ Mailing List
Hi Charles,
> you may want to try my cookbook at
> http://www.bueche.ch/comp/mx900/mx900.html
maybe you wanna play with the new hidd from bluez-utils-2.7 and the hidp
kernel module from patch-2.6.6-mh1 ;)
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: SourceForge.net Broadband
Sign-up now for SourceForge Broadband and get the fastest
6.0/768 connection for only $19.95/mo for the first 3 months!
http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Bluez-users] Bluez+2.6+Logitech bluetooth
2004-05-16 11:54 ` Marcel Holtmann
@ 2004-05-16 15:49 ` Charles Bueche
2004-05-16 16:25 ` Michal Semler
2004-05-17 20:43 ` Di Pietro Nicolas
1 sibling, 1 reply; 11+ messages in thread
From: Charles Bueche @ 2004-05-16 15:49 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: BlueZ Mailing List
Hi Marcel,
yes, I know I'm a bit off the bleeding edge since some weeks, but I'm
not alone at fault : gentoo-dev-sources is still at 2.6.5, and I don't
want to switch to another kernel for now.
When 2.6.6 is out, I will try your patch and the new user-space daemons.
Meanwhile, thank for your support to us all bluez users.
Charles
On Sun, 16 May 2004 13:54:17 +0200
Marcel Holtmann <marcel@holtmann.org> wrote:
> Hi Charles,
>
> > you may want to try my cookbook at
> > http://www.bueche.ch/comp/mx900/mx900.html
>
> maybe you wanna play with the new hidd from bluez-utils-2.7 and the
> hidp kernel module from patch-2.6.6-mh1 ;)
>
> Regards
>
> Marcel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Bluez-users] Bluez+2.6+Logitech bluetooth
2004-05-16 15:49 ` Charles Bueche
@ 2004-05-16 16:25 ` Michal Semler
2004-05-16 16:58 ` Marcel Holtmann
0 siblings, 1 reply; 11+ messages in thread
From: Michal Semler @ 2004-05-16 16:25 UTC (permalink / raw)
To: bluez-users
On Sunday 16 of May 2004 17:49, Charles Bueche wrote:
> Hi Marcel,
>
> yes, I know I'm a bit off the bleeding edge since some weeks, but I'm
> not alone at fault : gentoo-dev-sources is still at 2.6.5, and I don't
> want to switch to another kernel for now.
>
> When 2.6.6 is out, I will try your patch and the new user-space daemons.
> Meanwhile, thank for your support to us all bluez users.
>
> Charles
I can write it, coz I use it :)
Michal
-------------------------------------------------------
This SF.Net email is sponsored by: SourceForge.net Broadband
Sign-up now for SourceForge Broadband and get the fastest
6.0/768 connection for only $19.95/mo for the first 3 months!
http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Bluez-users] Bluez+2.6+Logitech bluetooth
2004-05-16 16:25 ` Michal Semler
@ 2004-05-16 16:58 ` Marcel Holtmann
0 siblings, 0 replies; 11+ messages in thread
From: Marcel Holtmann @ 2004-05-16 16:58 UTC (permalink / raw)
To: cijoml; +Cc: BlueZ Mailing List
Hi Michal,
> I can write it, coz I use it :)
actually I like to have a full BlueZ user howto so it can be added to
the Linux Documentation Project (www.tldp.org). My time for writing this
is very limited, but I already wrote some articles and papers in german.
If anyone is willing to translate them into english, I think we have a
good starting point. Maybe you wanna start a new thread with this topic
and coordinate this effort. I know that there are many people out there
that have enough experience with BlueZ to wrote a chapter or a paragraph
about it. So the first goal should be to make a content table and then
get people to write something.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: SourceForge.net Broadband
Sign-up now for SourceForge Broadband and get the fastest
6.0/768 connection for only $19.95/mo for the first 3 months!
http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Bluez-users] Bluez+2.6+Logitech bluetooth
2004-05-16 11:54 ` Marcel Holtmann
2004-05-16 15:49 ` Charles Bueche
@ 2004-05-17 20:43 ` Di Pietro Nicolas
2004-05-17 23:04 ` Marcel Holtmann
1 sibling, 1 reply; 11+ messages in thread
From: Di Pietro Nicolas @ 2004-05-17 20:43 UTC (permalink / raw)
To: bluez
Le dim 16/05/2004 =E0 13:54, Marcel Holtmann a =E9crit :=20
> Hi Charles,
>=20
> > you may want to try my cookbook at
> > http://www.bueche.ch/comp/mx900/mx900.html
>=20
> maybe you wanna play with the new hidd from bluez-utils-2.7 and the hidp
> kernel module from patch-2.6.6-mh1 ;)
>=20
> Regards
>=20
> Marcel
Hi all,
Just to say to you that, I've tried the new hidd and hidp modules
(from a patched against patch-2.6.6-mh1 2.6.6 kernel)
but it change a few (the only thing that has changed is when I halt
or reboot the computer after have done hid2hci, there is no more
Ooops when stopping usb
darthvader root # hidd
Can't open HIDP control socket: Address family not supported by protocol
darthvader root # modprobe hidp
darthvader root # May 17 22:19:41 darthvader Bluetooth: Core ver 2.4
May 17 22:19:41 darthvader NET: Registered protocol family 31
May 17 22:19:41 darthvader Bluetooth: HCI device and connection manager
initialized
May 17 22:19:41 darthvader Bluetooth: HCI socket layer initialized
May 17 22:19:41 darthvader Bluetooth: L2CAP ver 2.1
May 17 22:19:41 darthvader Bluetooth: L2CAP socket layer initialized
May 17 22:19:41 darthvader Bluetooth: HIDP (Human Interface Emulation)
ver 0.1
=20
darthvader root # hidd --server
darthvader root # May 17 22:33:48 darthvader hidd[14177]: Bluetooth HID
daemon
darthvader root #
darthvader root # lsmod
hidp 24000 0
l2cap 20676 1 hidp
bluetooth 41124 2 hidp,l2cap
nvidia 2074376 12
(...) net modules
usbhid 29952 0
ohci1394 30532 0
ieee1394 293688 2 eth1394,ohci1394
snd_intel8x0 29060 0
snd_mpu401_uart 6144 1 snd_intel8x0
ehci_hcd 24324 0
ohci_hcd 16644 0
evdev 7360 0
(...) sound modules
usbcore 91932 5 usbhid,ehci_hcd,ohci_hcd
processor 13872 0
fan 2828 0
button 4760 0
darthvader root # hid2hci
Switching device 046d:c704 to HCI mode was successful
darthvader root # May 17 22:26:22 darthvader usb 2-2.2: new full speed
USB device using address 5
<I switch to another keyboard>
darthvader root # lsmod
Module Size Used by
hci_usb 11456 0
hidp 24000 0
l2cap 20676 1 hidp
bluetooth 41124 2 hidp,l2cap
nvidia 2074376 12
usbhid 29952 0
ohci1394 30532 0
ieee1394 293688 2 eth1394,ohci1394
snd_intel8x0 29060 0
snd_mpu401_uart 6144 1 snd_intel8x0
ehci_hcd 24324 0
ohci_hcd 16644 0
evdev 7360 0
(...)
soundcore 7456 3 snd
usbcore 91932 5 usbhid,ehci_hcd,ohci_hcd
processor 13872 0
fan 2828 0
button 4760 0
darthvader bluetooth # lsusb
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 005: ID 046d:c707 Logitech, Inc.
Bus 002 Device 004: ID 046d:c704 Logitech, Inc.
Bus 002 Device 003: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 002 Device 002: ID 0451:2036 Texas Instruments, Inc. TUSB2036 Hub
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
darthvader bluetooth # hcitool hci0 up
darthvader bluetooth # hidd -i hci0
darthvader bluetooth # hidd --search
Searching ...
darthvader bluetooth #
darthvader bluetooth # hidd --show
darthvader bluetooth # hcitool dev
Devices:
darthvader bluetooth # hcitool scan
Device is not available: Success
darthvader bluetooth #
Don't know what to do now... :'(
Any idea ??? Suggestions ?
It seems that the new hidp is not used...
Thanks in advance
Nicolas
PS:Thank a lot for the bluez stack under Linux...
:Is it something right tha when I switch to hci the blue button on =20
the bt hub doesn't work anymore ??? Until I disconnect the hub and=20
reboot the computer
-------------------------------------------------------
This SF.Net email is sponsored by: SourceForge.net Broadband
Sign-up now for SourceForge Broadband and get the fastest
6.0/768 connection for only $19.95/mo for the first 3 months!
http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Bluez-users] Bluez+2.6+Logitech bluetooth
2004-05-17 20:43 ` Di Pietro Nicolas
@ 2004-05-17 23:04 ` Marcel Holtmann
2004-05-18 16:53 ` Di Pietro Nicolas
0 siblings, 1 reply; 11+ messages in thread
From: Marcel Holtmann @ 2004-05-17 23:04 UTC (permalink / raw)
To: Di Pietro Nicolas; +Cc: BlueZ Mailing List
Hi Nicolas,
> Just to say to you that, I've tried the new hidd and hidp modules
> (from a patched against patch-2.6.6-mh1 2.6.6 kernel)
> but it change a few (the only thing that has changed is when I halt
> or reboot the computer after have done hid2hci, there is no more
> Ooops when stopping usb
>
> darthvader root # hidd
> Can't open HIDP control socket: Address family not supported by protocol
this shouldn't happen, because the kernel knows which module it has to
load.
> darthvader root # hidd --server
> darthvader root # May 17 22:33:48 darthvader hidd[14177]: Bluetooth HID
> daemon
> darthvader root #
> darthvader root # lsmod
>
> hidp 24000 0
> l2cap 20676 1 hidp
> bluetooth 41124 2 hidp,l2cap
This is problematic, because after the start of hidd, the hidp must hold
a reference count of 2. Check the syslog for any errors.
> darthvader root # hid2hci
> Switching device 046d:c704 to HCI mode was successful
> darthvader root # May 17 22:26:22 darthvader usb 2-2.2: new full speed
> USB device using address 5
At this point hciconfig should report your device.
> darthvader bluetooth # lsusb
> Bus 003 Device 001: ID 0000:0000
> Bus 002 Device 005: ID 046d:c707 Logitech, Inc.
> Bus 002 Device 004: ID 046d:c704 Logitech, Inc.
> Bus 002 Device 003: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
> Bus 002 Device 002: ID 0451:2036 Texas Instruments, Inc. TUSB2036 Hub
> Bus 002 Device 001: ID 0000:0000
> Bus 001 Device 001: ID 0000:0000
The Bluetooth dongle hasn't changed from HID mode to HCI mode.
> PS:Thank a lot for the bluez stack under Linux...
> :Is it something right tha when I switch to hci the blue button on
> the bt hub doesn't work anymore ??? Until I disconnect the hub and
> reboot the computer
How should it work if you are in HCI mode ;)
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: SourceForge.net Broadband
Sign-up now for SourceForge Broadband and get the fastest
6.0/768 connection for only $19.95/mo for the first 3 months!
http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Bluez-users] Bluez+2.6+Logitech bluetooth
2004-05-17 23:04 ` Marcel Holtmann
@ 2004-05-18 16:53 ` Di Pietro Nicolas
0 siblings, 0 replies; 11+ messages in thread
From: Di Pietro Nicolas @ 2004-05-18 16:53 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: BlueZ Mailing List
Le mar 18/05/2004 =E0 01:04, Marcel Holtmann a =E9crit :
> Hi Nicolas,
>=20
> > Just to say to you that, I've tried the new hidd and hidp modules
> > (from a patched against patch-2.6.6-mh1 2.6.6 kernel)
> > but it change a few (the only thing that has changed is when I halt
> > or reboot the computer after have done hid2hci, there is no more
> > Ooops when stopping usb
> >=20
> > darthvader root # hidd
> > Can't open HIDP control socket: Address family not supported by protoco=
l
>=20
> this shouldn't happen, because the kernel knows which module it has to
> load.
huuu ? What have I to do with the kernel then ?
> > darthvader root # hidd --server
> > darthvader root # May 17 22:33:48 darthvader hidd[14177]: Bluetooth HID
> > daemon
> > darthvader root #
> > darthvader root # lsmod
> >=20
> > hidp 24000 0
> > l2cap 20676 1 hidp
> > bluetooth 41124 2 hidp,l2cap
>=20
> This is problematic, because after the start of hidd, the hidp must hold
> a reference count of 2. Check the syslog for any errors.
It was what I tougth, it's the reason why I've put the output of my
lsmod.
I've included all the output of my kernel messages (I've done a=20
"tail -f /var/log/messages &" before begining)
> > darthvader root # hid2hci
> > Switching device 046d:c704 to HCI mode was successful
> > darthvader root # May 17 22:26:22 darthvader usb 2-2.2: new full speed
> > USB device using address 5
>=20
> At this point hciconfig should report your device.
>=20
> > darthvader bluetooth # lsusb
> > Bus 003 Device 001: ID 0000:0000
> > Bus 002 Device 005: ID 046d:c707 Logitech, Inc.
> > Bus 002 Device 004: ID 046d:c704 Logitech, Inc.
> > Bus 002 Device 003: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
> > Bus 002 Device 002: ID 0451:2036 Texas Instruments, Inc. TUSB2036 Hub
> > Bus 002 Device 001: ID 0000:0000
> > Bus 001 Device 001: ID 0000:0000
>=20
> The Bluetooth dongle hasn't changed from HID mode to HCI mode.
>=20
What's this "Bus 002 Device 005: ID 046d:c707 Logitech, Inc." mean ?=20
I tought that is I got a new usb device, it was good
nic@darthvader nic $ /usr/sbin/lsusb
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 003: ID 046d:c704 Logitech, Inc.
Bus 002 Device 002: ID 0451:2036 Texas Instruments, Inc. TUSB2036 Hub
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
> > PS:Thank a lot for the bluez stack under Linux...
> > :Is it something right tha when I switch to hci the blue button on =20
> > the bt hub doesn't work anymore ??? Until I disconnect the hub and=20
> > reboot the computer
>=20
> How should it work if you are in HCI mode ;)
I'm trying to get it :-D
Cheers and thank you for your answer
Nicolas
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Bluez-users] Bluez+2.6+Logitech bluetooth
2004-05-15 16:39 [Bluez-users] Bluez+2.6+Logitech bluetooth de Laurent
2004-05-16 6:10 ` Charles Bueche
@ 2004-05-16 7:35 ` Frederic Detienne
2004-05-16 11:57 ` Marcel Holtmann
1 sibling, 1 reply; 11+ messages in thread
From: Frederic Detienne @ 2004-05-16 7:35 UTC (permalink / raw)
To: de Laurent; +Cc: bluez-users
Hi
I think this is normal. When you boot, the USB/BT hub (the mouse base
station) acts as a dumb RF<->HID in plain USB mode. I.e. Linux
recognizes the base station as a USB hub with plain USB keyboard and
mouse attached to it.
When you switch over to HCI mode with hid2hci, the USB hub, mouse and
keyboards disappear and a USB/BT dongle appears instead (i.e. a HCI
"hub"). The USB/BT piece is not connected to any device yet. You
normally have to pair the keyboard and mouse and start bthid to do the
HCI<->HID conversion in order to make Linux see your BT devices... You
can't type these commands since the kernel can't see your keyboard
during that phase :-) It's a catch chicken and egg problem.
Try connecting a secondary keyboard for the initial pairing and make
sure you start bthid automatically after hid2hci next time (you don't
have to pair each time).
Fred
On Sat, 2004-05-15 at 18:39, de Laurent wrote:
> Hi!
> I'll try to describe my problem. Please forgive me if the answer is
> simple, but I have been searching for a week for the solution...
>=20
> So, I bought Logitech Desktop MX for Bluetooth (mouse, keyboard and
> bluetooth hub as you probably know).=20
> My distro is Slackware 9.1.
> Kernel 2.6.6 (patched from 2.6.4 to 2.6.5 and to 2.6.6).
>=20
> I patched the kernel first(as above). Then I downloaded the patch
> from BlueZ site: patch-2.6.6-mh1 (all without errors). I added
> aliases to modules.conf:
> alias net-pf-31 bluez
> alias bt-proto-0 l2cap
> (and others for rfcomm, bnep and sco)
> This is how my /proc/.../devices looks like:
>=20
> T: Bus=3D02 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 =
MxCh=3D 2
> B: Alloc=3D 0/900 us ( 0%), #Int=3D 0, #Iso=3D 0
> D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D =
1
> P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06
> S: Manufacturer=3DLinux 2.6.6-mh1 uhci_hcd
> S: Product=3DVIA Technologies, Inc. USB (#2)
> S: SerialNumber=3D0000:00:11.3
> C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
> I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driv=
er=3Dhub
> E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D255ms
>=20
> T: Bus=3D01 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 =
MxCh=3D 2
> B: Alloc=3D247/900 us (27%), #Int=3D 3, #Iso=3D 0
> D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D =
1
> P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06
> S: Manufacturer=3DLinux 2.6.6-mh1 uhci_hcd
> S: Product=3DVIA Technologies, Inc. USB
> S: SerialNumber=3D0000:00:11.2
> C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
> I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driv=
er=3Dhub
> E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D255ms
>=20
> T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D01 Cnt=3D02 Dev#=3D 3 Spd=3D12 =
MxCh=3D 2
> D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D =
1
> P: Vendor=3D0451 ProdID=3D2036 Rev=3D 1.01
> S: Product=3DGeneral Purpose USB Hub
> C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3Da0 MxPwr=3D100mA
> I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driv=
er=3Dhub
> E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 1 Ivl=3D255ms
>=20
> T: Bus=3D01 Lev=3D02 Prnt=3D03 Port=3D00 Cnt=3D01 Dev#=3D 4 Spd=3D1.5=
MxCh=3D 0
> D: Ver=3D 1.10 Cls=3D00(>ifc ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D =
1
> P: Vendor=3D046d ProdID=3Dc703 Rev=3D24.04
> S: Manufacturer=3DLogitech
> S: Product=3DUSB Receiver
> S: SerialNumber=3D0C58B6
> C:* #Ifs=3D 2 Cfg#=3D 1 Atr=3Da0 MxPwr=3D 98mA
> I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D03(HID ) Sub=3D01 Prot=3D01 Driv=
er=3Dhid
> E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 8 Ivl=3D10ms
> I: If#=3D 1 Alt=3D 0 #EPs=3D 1 Cls=3D03(HID ) Sub=3D01 Prot=3D02 Driv=
er=3Dhid
> E: Ad=3D82(I) Atr=3D03(Int.) MxPS=3D 8 Ivl=3D10ms
>=20
> my lsmod give:
> Module Size Used by
> l2cap 21120 0=20
> bluetooth 41956 1 l2cap
> usbhid 30336 0=20
> usblp 10944 0=20
> uhci_hcd 29064 0=20
> usbcore 104084 5 usbhid,usblp,uhci_hcd
> and
> hci_usb
> sound modules, and so on.
> If I tried to modprobe bluez (before modprobe bluetooth and l2cap) I=20
> received "no bluez find"...
> I did of course first compiled newest bluez-libs, utils and hciemu.
> When I tried to hciconfig hci0 up it shows:
> Can't get device info: No such device
> When I tried to hid2hci, it hangs and I can't use the keyboard and
> mouse.
> I can use them normaly even without bluetooth, via usb.
> This is my messages:
> May 15 15:23:09 smith kernel: usbcore: registered new driver usbfs
> May 15 15:23:09 smith kernel: usbcore: registered new driver hub
> May 15 15:23:09 smith kernel: USB Universal Host Controller
> Interface driver v2.2
> May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.2: VIA
> Technologies, Inc. USB
> May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.2: irq 5, io base
> 0000d800
> May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.2: new USB bus
> registered, assigned bus number 1
> May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.2: detected 2 ports
> May 15 15:23:09 smith kernel: usb usb1: Product: VIA Technologies,
> Inc. USB
> May 15 15:23:09 smith kernel: usb usb1: Manufacturer: Linux
> 2.6.6-mh1 uhci_hcd
> May 15 15:23:09 smith kernel: usb usb1: SerialNumber: 0000:00:11.2
> May 15 15:23:09 smith kernel: hub 1-0:1.0: USB hub found
> May 15 15:23:09 smith kernel: hub 1-0:1.0: 2 ports detected
> May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.3: VIA
> Technologies, Inc. USB (#2)
> May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.3: irq 5, io base
> 0000dc00
> May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.3: new USB bus
> registered, assigned bus number 2
> May 15 15:23:09 smith kernel: uhci_hcd 0000:00:11.3: detected 2 ports
> May 15 15:23:09 smith kernel: usb usb2: Product: VIA Technologies,
> Inc. USB (#2)
> May 15 15:23:09 smith kernel: usb usb2: Manufacturer: Linux
> 2.6.6-mh1 uhci_hcd
> May 15 15:23:09 smith kernel: usb usb2: SerialNumber: 0000:00:11.3
> May 15 15:23:09 smith kernel: hub 2-0:1.0: USB hub found
> May 15 15:23:09 smith kernel: hub 2-0:1.0: 2 ports detected
> May 15 15:23:09 smith kernel: usb 1-1: new full speed USB device
> using address 2
> May 15 15:23:09 smith kernel: usb 1-1: Product: DeskJet 930C
> May 15 15:23:09 smith kernel: usb 1-1: Manufacturer: Hewlett-Packard
> May 15 15:23:09 smith kernel: usb 1-1: SerialNumber: ES05F1804RJJ
> May 15 15:23:09 smith kernel: drivers/usb/class/usblp.c: usblp0: USB
> Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1204
> May 15 15:23:09 smith kernel: usbcore: registered new driver usblp
> May 15 15:23:09 smith kernel: drivers/usb/class/usblp.c: v0.13: USB
> Printer Device Class driver
> May 15 15:23:09 smith kernel: usb 1-2: new full speed USB device
> using address 3
> May 15 15:23:09 smith kernel: usb 1-2: Product: General Purpose USB Hub
> May 15 15:23:09 smith kernel: hub 1-2:1.0: USB hub found
> May 15 15:23:09 smith kernel: hub 1-2:1.0: 2 ports detected
> May 15 15:23:09 smith kernel: usb 1-2.1: new low speed USB device
> using address 4
> May 15 15:23:09 smith kernel: usb 1-2.1: Product: USB Receiver
> May 15 15:23:09 smith kernel: usb 1-2.1: Manufacturer: Logitech
> May 15 15:23:09 smith kernel: usb 1-2.1: SerialNumber: 0C58B6
> May 15 15:23:09 smith modprobe: FATAL: Module usbhid already in kernel.=
=20
> May 15 15:23:09 smith usb.agent[861]: ... can't load module usbhid
> May 15 15:23:09 smith usb.agent[861]: missing kernel or user mode
> driver usbhid=20
> May 15 15:23:09 smith modprobe: FATAL: Module mousedev not found.=20
> May 15 15:23:09 smith kernel: usbcore: registered new driver hiddev
> May 15 15:23:09 smith kernel: input: USB HID v1.10 Keyboard
> [Logitech USB Receiver] on usb-0000:00:11.2-2.1
> May 15 15:23:09 smith modprobe: FATAL: Module keybdev not found.=20
> May 15 15:23:09 smith kernel: input,hiddev96: USB HID v1.10 Mouse
> [Logitech USB Receiver] on usb-0000:00:11.2-2.1
> May 15 15:23:09 smith kernel: usbcore: registered new driver hid
> May 15 15:23:09 smith kernel: drivers/usb/input/hid-core.c: v2.0:USB
> HID core driver
>=20
> And my question is:
> What do I wrong? Why doesn=B4t it work?=20
>=20
> Waldemar
>=20
>=20
>=20
>=20
> -------------------------------------------------------
> This SF.Net email is sponsored by: SourceForge.net Broadband
> Sign-up now for SourceForge Broadband and get the fastest
> 6.0/768 connection for only $19.95/mo for the first 3 months!
> http://ads.osdn.com/?ad_id%62&alloc_ida84&op=CCk
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
This SF.Net email is sponsored by: SourceForge.net Broadband
Sign-up now for SourceForge Broadband and get the fastest
6.0/768 connection for only $19.95/mo for the first 3 months!
http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Bluez-users] Bluez+2.6+Logitech bluetooth
2004-05-16 7:35 ` Frederic Detienne
@ 2004-05-16 11:57 ` Marcel Holtmann
0 siblings, 0 replies; 11+ messages in thread
From: Marcel Holtmann @ 2004-05-16 11:57 UTC (permalink / raw)
To: fd; +Cc: de Laurent, BlueZ Mailing List
Hi Fred,
> I think this is normal. When you boot, the USB/BT hub (the mouse base
> station) acts as a dumb RF<->HID in plain USB mode. I.e. Linux
> recognizes the base station as a USB hub with plain USB keyboard and
> mouse attached to it.
>
> When you switch over to HCI mode with hid2hci, the USB hub, mouse and
> keyboards disappear and a USB/BT dongle appears instead (i.e. a HCI
> "hub"). The USB/BT piece is not connected to any device yet. You
> normally have to pair the keyboard and mouse and start bthid to do the
> HCI<->HID conversion in order to make Linux see your BT devices... You
> can't type these commands since the kernel can't see your keyboard
> during that phase :-) It's a catch chicken and egg problem.
>
> Try connecting a secondary keyboard for the initial pairing and make
> sure you start bthid automatically after hid2hci next time (you don't
> have to pair each time).
actually this isn't a chicken and egg problem. You only must ensure that
the hidd is correctly started. When you then run hid2hci the mouse and
keyboard will be disconnected and they will reconnect, but now the BlueZ
is running the HID profile.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: SourceForge.net Broadband
Sign-up now for SourceForge Broadband and get the fastest
6.0/768 connection for only $19.95/mo for the first 3 months!
http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2004-05-18 16:53 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-05-15 16:39 [Bluez-users] Bluez+2.6+Logitech bluetooth de Laurent
2004-05-16 6:10 ` Charles Bueche
2004-05-16 11:54 ` Marcel Holtmann
2004-05-16 15:49 ` Charles Bueche
2004-05-16 16:25 ` Michal Semler
2004-05-16 16:58 ` Marcel Holtmann
2004-05-17 20:43 ` Di Pietro Nicolas
2004-05-17 23:04 ` Marcel Holtmann
2004-05-18 16:53 ` Di Pietro Nicolas
2004-05-16 7:35 ` Frederic Detienne
2004-05-16 11:57 ` Marcel Holtmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox