[Bluez-users] Linux-2.6, Zaapa USB Dongle - can't find near devices

[Bluez-users] Linux-2.6, Zaapa USB Dongle - can't find near devices

[Filipe Veloza]

[-- Attachment #1: Type: text/plain, Size: 1143 bytes --]

Hi all,

I'm trying to use Bluetooth, I've start by acquiring a Zaapa USB Dongle
( I think it uses Zeevo Chipset ) here goes tech info :

Distribution : Fedora 1
Kernel : 2.6 with bluetooth built as modules
Bluez rpm's:
bluez-utils-2.4-1
bluez-pan-1.1-2
bluez-sdp-1.5-1
bluez-hcidump-1.5-3
bluez-libs-2.5-1
bluez-bluefw-1.0-1

Connecting the device dmesg returns :

Bluetooth: Core ver 2.4
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.5
usbcore: registered new driver hci_usb

hciconfig :

hci0:   Type: USB
        BD Address: 00:00:00:00:00:00 ACL MTU: 0:0  SCO MTU: 0:0
        DOWN
        RX bytes:0 acl:0 sco:0 events:0 errors:0
        TX bytes:0 acl:0 sco:0 commands:0 errors:0

( I start to find strange that here returns null HW address )

The problem I had was after this but I now cannot replicate , so now
lets start here ...

Why can't I set the device up #hciconfig up hci0

Thanxs
-- 
Filipe Veloza <fmvel@rnl.ist.utl.pt>

PGP ( ID:0xB8ED711C SERVER:pgp.mit.edu )

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [Bluez-users] Linux-2.6, Zaapa USB Dongle - can't find near devices

[Michal Semler]

send 
hciconfig -a

But Zeevo is shit. You better buy CSR based dongle.

Michal

On Friday 04 of June 2004 20:00, Filipe Veloza wrote:
> Hi all,
>
> I'm trying to use Bluetooth, I've start by acquiring a Zaapa USB Dongle
> ( I think it uses Zeevo Chipset ) here goes tech info :
>
> Distribution : Fedora 1
> Kernel : 2.6 with bluetooth built as modules
> Bluez rpm's:
> bluez-utils-2.4-1
> bluez-pan-1.1-2
> bluez-sdp-1.5-1
> bluez-hcidump-1.5-3
> bluez-libs-2.5-1
> bluez-bluefw-1.0-1
>
> Connecting the device dmesg returns :
>
> Bluetooth: Core ver 2.4
> NET: Registered protocol family 31
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> Bluetooth: HCI USB driver ver 2.5
> usbcore: registered new driver hci_usb
>
> hciconfig :
>
> hci0:   Type: USB
>         BD Address: 00:00:00:00:00:00 ACL MTU: 0:0  SCO MTU: 0:0
>         DOWN
>         RX bytes:0 acl:0 sco:0 events:0 errors:0
>         TX bytes:0 acl:0 sco:0 commands:0 errors:0
>
> ( I start to find strange that here returns null HW address )
>
> The problem I had was after this but I now cannot replicate , so now
> lets start here ...
>
> Why can't I set the device up #hciconfig up hci0
>
> Thanxs


-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
>From Windows to Linux, servers to mobile, InstallShield X is the one
installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Linux-2.6, Zaapa USB Dongle - can't find near devices

[Marcel Holtmann]

Hi Michal,

> send 
> hciconfig -a

this won't help if you can't bring the device up. You must show us
/proc/bus/usb/devices.

> But Zeevo is shit. You better buy CSR based dongle.

Let me put into perspective. The TC2001 is not a Bluetooth chip that
should ever been used in any end products. The upcoming ZV4002 is much
better and it looks like that Zeevo had learned many things. However
buying a CSR based device is the best decision at the moment.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
>From Windows to Linux, servers to mobile, InstallShield X is the one
installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Linux-2.6, Zaapa USB Dongle - can't find near devices

[Marcel Holtmann]

Hi Filipe,

> here goes anyway :P
> 
> [~]hciconfig -a
> hci0:   Type: USB
>         BD Address: 00:00:00:00:00:00 ACL MTU: 0:0  SCO MTU: 0:0
>         DOWN
>         RX bytes:0 acl:0 sco:0 events:0 errors:0
>         TX bytes:0 acl:0 sco:0 commands:0 errors:0
>         Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
>         Packet type: DM1 DH1 HV1
>         Link policy:
>         Link mode: SLAVE ACCEPT

you said you've tried to bring up the device. Try again, because
"hciconfig hci0 up" should bring it at least up.

If it still fails look at dmesg or the syslog for any errors.

> T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
> D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs=  1
> P:  Vendor=0b7a ProdID=07d0 Rev= 1.34
> S:  SerialNumber=3E402C78
> C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=100mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=hci_usb
> E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=1ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=03(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> I:  If#= 1 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)

You are right this is a Zeevo chip, but it is the old TC2001. I don't
know if it helps, but try 2.6.6-mh3 or at 2.6.7-rc2-bk5.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
>From Windows to Linux, servers to mobile, InstallShield X is the one
installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Linux-2.6, Zaapa USB Dongle - can't find near devices

[Filipe Veloza]

[-- Attachment #1: Type: text/plain, Size: 2465 bytes --]

Apperently now I can bring the device up ( maybe the command was worng
:P SORRY ). but there's still something that's doesn't feel right but
that would be another issue.

This is solved thanks for the help ppl.

I take the chance to annouce ( if anyone is interested ) I got a linux
box l2ping with a Nokia Ngage mogile using a Zaapa USB dongle.

Maybe you can add to the support page in order to help others finding
this info.

On Sat, 2004-06-05 at 12:25, Marcel Holtmann wrote:
> Hi Filipe,
> 
> > here goes anyway :P
> > 
> > [~]hciconfig -a
> > hci0:   Type: USB
> >         BD Address: 00:00:00:00:00:00 ACL MTU: 0:0  SCO MTU: 0:0
> >         DOWN
> >         RX bytes:0 acl:0 sco:0 events:0 errors:0
> >         TX bytes:0 acl:0 sco:0 commands:0 errors:0
> >         Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
> >         Packet type: DM1 DH1 HV1
> >         Link policy:
> >         Link mode: SLAVE ACCEPT
> 
> you said you've tried to bring up the device. Try again, because
> "hciconfig hci0 up" should bring it at least up.
> 
> If it still fails look at dmesg or the syslog for any errors.
> 
> > T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
> > D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs=  1
> > P:  Vendor=0b7a ProdID=07d0 Rev= 1.34
> > S:  SerialNumber=3E402C78
> > C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=100mA
> > I:  If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=hci_usb
> > E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=1ms
> > E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > E:  Ad=03(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > I:  If#= 1 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)
> 
> You are right this is a Zeevo chip, but it is the old TC2001. I don't
> know if it helps, but try 2.6.6-mh3 or at 2.6.7-rc2-bk5.
> 
> Regards
> 
> Marcel
> 
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by the new InstallShield X.
> >From Windows to Linux, servers to mobile, InstallShield X is the one
> installation-authoring solution that does it all. Learn more and
> evaluate today! http://www.installshield.com/Dev2Dev/0504
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
-- 
Filipe Veloza <fmvel@rnl.ist.utl.pt>

PGP ( ID:0xB8ED711C SERVER:pgp.mit.edu )

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [Bluez-users] Linux-2.6, Zaapa USB Dongle - can't find near devices

[Marcel Holtmann]

Hi Filipe,

> Apperently now I can bring the device up ( maybe the command was worng
> :P SORRY ). but there's still something that's doesn't feel right but
> that would be another issue.
> 
> This is solved thanks for the help ppl.
> 
> I take the chance to annouce ( if anyone is interested ) I got a linux
> box l2ping with a Nokia Ngage mogile using a Zaapa USB dongle.
> 
> Maybe you can add to the support page in order to help others finding
> this info.

send us the output of "hciconfig -a" and "hcitool info <ngage>" as root.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
>From Windows to Linux, servers to mobile, InstallShield X is the one
installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users