* [Bluez-users] hci_acldata_packet error in a Palm connection.
@ 2004-06-10 12:43 Eduardo Moreno
2004-06-10 13:01 ` Nicholas A. Preyss
2004-06-10 13:15 ` Marcel Holtmann
0 siblings, 2 replies; 6+ messages in thread
From: Eduardo Moreno @ 2004-06-10 12:43 UTC (permalink / raw)
To: bluez-users
Hi list.
I'm starting in the bluetooth world, and i'm trying to connect my Palm
Tungsten T2 with my Kernel 2.6.6 + usb dongle.
I followed all the clasical howtos of Palm+BlueZ (of course, using the
2.6.6 modules).
I start hcid, sdpd, without problem, the communication with the palm
works great, I can also l2ping the palm device.
But when I try a ppp connection (using dund) I receive the following
message in /var/log/messages:
kernel: hci_acldata_packet: hci0 ACL packet for unknown connection handle 1
Searching "ACL packet for unknown connection handle 1" in google, I
found 3 very old messages (2001) of this mailing list speaking about a
bug.....
Anybody can help me? thanks.
-------------------------------------------------------
This SF.Net email is sponsored by: GNOME Foundation
Hackers Unite! GUADEC: The world's #1 Open Source Desktop Event.
GNOME Users and Developers European Conference, 28-30th June in Norway
http://2004/guadec.org
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] hci_acldata_packet error in a Palm connection.
2004-06-10 12:43 [Bluez-users] hci_acldata_packet error in a Palm connection Eduardo Moreno
@ 2004-06-10 13:01 ` Nicholas A. Preyss
2004-06-10 14:01 ` Eduardo Moreno A
2004-06-10 13:15 ` Marcel Holtmann
1 sibling, 1 reply; 6+ messages in thread
From: Nicholas A. Preyss @ 2004-06-10 13:01 UTC (permalink / raw)
To: bluez-users
On 0, Eduardo Moreno <emoreno@dim.uchile.cl> wrote:
> [Tungsten T2 and 2.6.6]
> I start hcid, sdpd, without problem, the communication with the palm
> works great, I can also l2ping the palm device.
>
> But when I try a ppp connection (using dund) I receive the following
> message in /var/log/messages:
>
> kernel: hci_acldata_packet: hci0 ACL packet for unknown connection handle 1
>
> Searching "ACL packet for unknown connection handle 1" in google, I
> found 3 very old messages (2001) of this mailing list speaking about a
> bug.....
>
> Anybody can help me? thanks.
Post a hcidump of the connection, while this appears. You are not so
clear about, how dund behaves. Does it exit? What does it show if you
don't detach the daemon.
nicholas
-------------------------------------------------------
This SF.Net email is sponsored by: GNOME Foundation
Hackers Unite! GUADEC: The world's #1 Open Source Desktop Event.
GNOME Users and Developers European Conference, 28-30th June in Norway
http://2004/guadec.org
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] hci_acldata_packet error in a Palm connection.
2004-06-10 13:01 ` Nicholas A. Preyss
@ 2004-06-10 14:01 ` Eduardo Moreno A
0 siblings, 0 replies; 6+ messages in thread
From: Eduardo Moreno A @ 2004-06-10 14:01 UTC (permalink / raw)
To: Nicholas A. Preyss; +Cc: bluez-users@lists.sourceforge.net
First of all, thanks for this help.
> Post a hcidump of the connection, while this appears. You are not so
> clear about, how dund behaves. Does it exit? What does it show if you
> don't detach the daemon.
Here it goes:
> HCI Event: Max Slots Change(0x1b) plen 3
> ACL data: handle 0x0001 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
> HCI Event: Connect Complete(0x03) plen 11
< HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4
> HCI Event: Max Slots Change(0x1b) plen 3
> HCI Event: Command Complete(0x0e) plen 6
< HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Connection Packet Type Changed(0x1d) plen 5
# In this step, it's stay 1-2 minutes...
# then, the connection fails at the palm.
# and this is the hcidump continuation
> ACL data: handle 0x0001 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< ACL data: handle 0x0001 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0001 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
< ACL data: handle 0x0001 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0001 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0001 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0001 flags 0x02 dlen 17
L2CAP(d): cid 0x40 len 13 [psm 1]
SDP SS Req: tid 0x0 len 0x8
pat uuid-16 0x1103 (DUN)
max 0x1
cont 00
< ACL data: handle 0x0001 flags 0x02 dlen 14
L2CAP(d): cid 0x40 len 10 [psm 1]
SDP SS Rsp: tid 0x0 len 0x5
tot 0x0 cur 0x0
cont 00
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0001 flags 0x02 dlen 21
L2CAP(d): cid 0x40 len 17 [psm 1]
SDP SA Req: tid 0x1 len 0xc
hndl 0x0
max 0xffff
aid(s) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 0x0001 flags 0x02 dlen 30
L2CAP(d): cid 0x40 len 26 [psm 1]
SDP SA Rsp: tid 0x1 len 0x15
cnt 0x12
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) uint 0x1 uint 0x1 > >
cont 00
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0001 flags 0x02 dlen 21
L2CAP(d): cid 0x40 len 17 [psm 1]
SDP SA Req: tid 0x2 len 0xc
hndl 0x0
max 0xffff
aid(s) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 0x0001 flags 0x02 dlen 30
L2CAP(d): cid 0x40 len 26 [psm 1]
SDP SA Rsp: tid 0x2 len 0x15
cnt 0x12
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) uint 0x1 uint 0x1 > >
cont 00
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0001 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 0x0001 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0001 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< ACL data: handle 0x0001 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0001 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
< ACL data: handle 0x0001 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0001 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0001 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0001 flags 0x02 dlen 17
L2CAP(d): cid 0x40 len 13 [psm 1]
SDP SS Req: tid 0x3 len 0x8
pat uuid-16 0x1101 (SP)
max 0x1
cont 00
< ACL data: handle 0x0001 flags 0x02 dlen 14
L2CAP(d): cid 0x40 len 10 [psm 1]
SDP SS Rsp: tid 0x3 len 0x5
tot 0x0 cur 0x0
cont 00
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0001 flags 0x02 dlen 21
L2CAP(d): cid 0x40 len 17 [psm 1]
SDP SA Req: tid 0x4 len 0xc
hndl 0x0
max 0xffff
aid(s) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 0x0001 flags 0x02 dlen 30
L2CAP(d): cid 0x40 len 26 [psm 1]
SDP SA Rsp: tid 0x4 len 0x15
cnt 0x12
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) uint 0x1 uint 0x1 > >
cont 00
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0001 flags 0x02 dlen 21
L2CAP(d): cid 0x40 len 17 [psm 1]
SDP SA Req: tid 0x5 len 0xc
hndl 0x0
max 0xffff
aid(s) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 0x0001 flags 0x02 dlen 30
L2CAP(d): cid 0x40 len 26 [psm 1]
SDP SA Rsp: tid 0x5 len 0x15
cnt 0x12
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) uint 0x1 uint 0x1 > >
cont 00
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0001 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 0x0001 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Disconn Complete(0x05) plen 4
THANKS!
-------------------------------------------------------
This SF.Net email is sponsored by: GNOME Foundation
Hackers Unite! GUADEC: The world's #1 Open Source Desktop Event.
GNOME Users and Developers European Conference, 28-30th June in Norway
http://2004/guadec.org
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] hci_acldata_packet error in a Palm connection.
2004-06-10 12:43 [Bluez-users] hci_acldata_packet error in a Palm connection Eduardo Moreno
2004-06-10 13:01 ` Nicholas A. Preyss
@ 2004-06-10 13:15 ` Marcel Holtmann
2004-06-10 13:34 ` Eduardo Moreno A
1 sibling, 1 reply; 6+ messages in thread
From: Marcel Holtmann @ 2004-06-10 13:15 UTC (permalink / raw)
To: Eduardo Moreno; +Cc: BlueZ Mailing List
Hi Eduardo,
> I'm starting in the bluetooth world, and i'm trying to connect my Palm
> Tungsten T2 with my Kernel 2.6.6 + usb dongle.
>
> I followed all the clasical howtos of Palm+BlueZ (of course, using the
> 2.6.6 modules).
>
> I start hcid, sdpd, without problem, the communication with the palm
> works great, I can also l2ping the palm device.
>
> But when I try a ppp connection (using dund) I receive the following
> message in /var/log/messages:
>
> kernel: hci_acldata_packet: hci0 ACL packet for unknown connection handle 1
>
> Searching "ACL packet for unknown connection handle 1" in google, I
> found 3 very old messages (2001) of this mailing list speaking about a
> bug.....
what kind of dongle are you using (hciconfig -a)? Maybe you need a
firmware update for your Palm or you have to buy yourself another
dongle.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: GNOME Foundation
Hackers Unite! GUADEC: The world's #1 Open Source Desktop Event.
GNOME Users and Developers European Conference, 28-30th June in Norway
http://2004/guadec.org
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] hci_acldata_packet error in a Palm connection.
2004-06-10 13:15 ` Marcel Holtmann
@ 2004-06-10 13:34 ` Eduardo Moreno A
2004-06-10 13:42 ` Marcel Holtmann
0 siblings, 1 reply; 6+ messages in thread
From: Eduardo Moreno A @ 2004-06-10 13:34 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: BlueZ Mailing List
On Thu, 10 Jun 2004, Marcel Holtmann wrote:
> Hi Eduardo,
>
>> I'm starting in the bluetooth world, and i'm trying to connect my Palm
>> Tungsten T2 with my Kernel 2.6.6 + usb dongle.
>>
>> I followed all the clasical howtos of Palm+BlueZ (of course, using the
>> 2.6.6 modules).
>>
>> I start hcid, sdpd, without problem, the communication with the palm
>> works great, I can also l2ping the palm device.
>>
>> But when I try a ppp connection (using dund) I receive the following
>> message in /var/log/messages:
>>
>> kernel: hci_acldata_packet: hci0 ACL packet for unknown connection handle 1
>>
>> Searching "ACL packet for unknown connection handle 1" in google, I
>> found 3 very old messages (2001) of this mailing list speaking about a
>> bug.....
>
> what kind of dongle are you using (hciconfig -a)? Maybe you need a
> firmware update for your Palm or you have to buy yourself another
> dongle.
>
> Regards
>
> Marcel
>
>
>
I have a "freeControl" usb dongle using chipset Broadcom (it's supported
in http://www.holtmann.org/linux/bluetooth/devices.html using
hci_usb+bluefw). I tried using bluefw and bcm203x module but I don't know
if the firmware was loaded (there is no message in any log, how can I
see if it was loaded or not?), and if it was loaded, I still have the
same problem.
My hciconfig -a:
hci0: Type: USB
BD Address: 00:0A:9A:00:68:AC ACL MTU: 339:4 SCO MTU: 64:0
UP RUNNING PSCAN ISCAN
RX bytes:3203 acl:69 sco:0 events:171 errors:0
TX bytes:2658 acl:65 sco:0 commands:56 errors:0
Features: 0xff 0xff 0x3d 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: ACCEPT MASTER
Name: 'BlueZ (0)'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x8a LMP Ver: 1.1 (0x1) LMP Subver:
0x8a
Manufacturer: Transilica, Inc. (24)
Thanks.
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [Bluez-users] hci_acldata_packet error in a Palm connection.
2004-06-10 13:34 ` Eduardo Moreno A
@ 2004-06-10 13:42 ` Marcel Holtmann
0 siblings, 0 replies; 6+ messages in thread
From: Marcel Holtmann @ 2004-06-10 13:42 UTC (permalink / raw)
To: Eduardo Moreno A; +Cc: BlueZ Mailing List
Hi Eduardo,
> I have a "freeControl" usb dongle using chipset Broadcom (it's supported
> in http://www.holtmann.org/linux/bluetooth/devices.html using
> hci_usb+bluefw). I tried using bluefw and bcm203x module but I don't know
> if the firmware was loaded (there is no message in any log, how can I
> see if it was loaded or not?), and if it was loaded, I still have the
> same problem.
>
> My hciconfig -a:
>
> hci0: Type: USB
> BD Address: 00:0A:9A:00:68:AC ACL MTU: 339:4 SCO MTU: 64:0
> UP RUNNING PSCAN ISCAN
> RX bytes:3203 acl:69 sco:0 events:171 errors:0
> TX bytes:2658 acl:65 sco:0 commands:56 errors:0
> Features: 0xff 0xff 0x3d 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: ACCEPT MASTER
> Name: 'BlueZ (0)'
> Class: 0x000100
> Service Classes: Unspecified
> Device Class: Computer, Uncategorized
> HCI Ver: 1.1 (0x1) HCI Rev: 0x8a LMP Ver: 1.1 (0x1) LMP Subver:
> 0x8a
> Manufacturer: Transilica, Inc. (24)
this is not a Broadcom dongle and so it don't need bluefw. I must update
my devices list, because it seems freeControl has changed the Bluetooth
chip on their dongles. Do you have some more information about your
device for me?
Try to buy yourself CSR based dongle. You will have less problems,
because this Transilicia chip are not so good.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: GNOME Foundation
Hackers Unite! GUADEC: The world's #1 Open Source Desktop Event.
GNOME Users and Developers European Conference, 28-30th June in Norway
http://2004/guadec.org
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2004-06-10 14:01 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-06-10 12:43 [Bluez-users] hci_acldata_packet error in a Palm connection Eduardo Moreno
2004-06-10 13:01 ` Nicholas A. Preyss
2004-06-10 14:01 ` Eduardo Moreno A
2004-06-10 13:15 ` Marcel Holtmann
2004-06-10 13:34 ` Eduardo Moreno A
2004-06-10 13:42 ` Marcel Holtmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox