AW: [Bluez-users] Zaurus and PAN profile

AW: [Bluez-users] Zaurus and PAN profile

[Mateo, Jose-Luis]

Hallo Marcel,
hcidump hangs when I try to connect from the PC. hciconfig runs ok:

Type : UART
BD Adress: ... ACL MUT:192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
.....

but with the option "-a" hangs just before the filed "Name". Can it be because of the different MTU values on the two devices?

I'm using Kernel 2.4.6 (module bluez-zaurus_2.3b_arm) and a CSR BlueCore02 chipset.

Regards,
Jose


-----Ursprungliche Nachricht-----
Von: Marcel Holtmann [mailto:marcel@holtmann.org]
Gesendet: Mittwoch, 23. Juni 2004 18:10
An: Mateo, Jose-Luis
Cc: BlueZ Mailing List
Betreff: Re: [Bluez-users] Zaurus and PAN profile


Hi Jose,

> I'm trying to connect a Zaurus PDA with a Laptop using the PAN Profile. I can ping with l2ping and connect using hcitool, but not using pand. The message error is: Connection refused (111).

sounds like a PIN problem. Look with "hcidump -x" at it. What does
"hciconfig -a" say?

Regards

Marcel

Re: [Bluez-users] Zaurus and PAN profile

[Marcel Holtmann]

Hi Jose,

> hcidump hangs when I try to connect from the PC. hciconfig runs ok:
> 
> Type : UART
> BD Adress: ... ACL MUT:192:8 SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN
> .....
> 
> but with the option "-a" hangs just before the filed "Name". Can it be because of the different MTU values on the two devices?

No. This is must be because of H4 or BCSP troubles. What hciattach
command do you use? Try to install newer kernel modules.

Regards

Marcel




-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

[Bluez-users] Zaurus and PAN profile

[Mateo, Jose-Luis]

Hallo,
I'm trying to connect a Zaurus PDA with a Laptop using the PAN Profile. =
I can ping with l2ping and connect using hcitool, but not using pand. =
The message error is: Connection refused (111).

Any experiences?

Thanks,
Jos=E9



-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Zaurus and PAN profile

[Marcel Holtmann]

Hi Jose,

> I'm trying to connect a Zaurus PDA with a Laptop using the PAN Profile. I can ping with l2ping and connect using hcitool, but not using pand. The message error is: Connection refused (111).

sounds like a PIN problem. Look with "hcidump -x" at it. What does
"hciconfig -a" say?

Regards

Marcel




-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users