[Bluez-users] Presentation slides are online

[Bluez-users] Presentation slides are online

[Marcel Holtmann]

Hi Folks,

I made the presentation slides of my talks at the LinuxTag 2004 and the
GUUG-Fr=FChjahrsfachgespr=E4ch 2004 available as PDF. I collect all these
information on the BlueZ talks page at=20

	http://www.bluez.org/talks.html

Both talks were in German and so the slides are also in German, but the
slides from the LinuxTag contains many graphics and the GUUG-FFG talk
has some command outputs in it, too. Even if you are not a German native
speaker you will find them helpful, I think.

If there is anyone who is talking about Bluetooth and Linux or something
that is BlueZ related I am happy to extend this list. Drop me a quick
note with the details.

Regards

Marcel




-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Presentation slides are online

[Nicholas A. Preyss]

On  0, Marcel Holtmann <marcel@holtmann.org> wrote:
> I made the presentation slides of my talks at the LinuxTag 2004 and the
> GUUG-Frühjahrsfachgespräch 2004 available as PDF. I collect all these
> information on the BlueZ talks page at 
> 
> 	http://www.bluez.org/talks.html
> 
> Both talks were in German and so the slides are also in German, but the
> slides from the LinuxTag contains many graphics and the GUUG-FFG talk
> has some command outputs in it, too. Even if you are not a German native
> speaker you will find them helpful, I think.

You now have some experience based data, which dongles accept the signed
apple hciproxy firmware and which one render unusable?

nicholas


-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Presentation slides are online

[Marcel Holtmann]

Hi Nicholas,

> You now have some experience based data, which dongles accept the signed
> apple hciproxy firmware and which one render unusable?

the D-Link revision B3 and the Allnet ALL1575 seem to work fine. There
was another one that I've tested successfully on the LinuxTag, but I
can't remember from what manufacturer it was. The revision B4 of the
D-Link is not working at the moment. Looks like an USB chip or flash
timing problem.

Some other dongles can be updated with the same file, but in the case of
only 4 Mbit flash you will get HCI 16.14 firmware and not the HCI 18.1
with HID proxy support.

Regards

Marcel




-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Presentation slides are online

[Bc. Michal Semler]

On Monday 28 of June 2004 16:02, Marcel Holtmann wrote:
> Hi Nicholas,
>
> > You now have some experience based data, which dongles accept the signed
> > apple hciproxy firmware and which one render unusable?
>
> the D-Link revision B3 and the Allnet ALL1575 seem to work fine. There
> was another one that I've tested successfully on the LinuxTag, but I
> can't remember from what manufacturer it was. The revision B4 of the
> D-Link is not working at the moment. Looks like an USB chip or flash
> timing problem.
>
> Some other dongles can be updated with the same file, but in the case of
> only 4 Mbit flash you will get HCI 16.14 firmware and not the HCI 18.1
> with HID proxy support.

And Marcel,

is it possible to flash Microsoft Wireless Transceiver?

Michal


-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Presentation slides are online

[Diego Liziero]

I've upgraded D-Link revision B3 and B2 with a iMac
and both of them seem to work fine.

Regards,
Diego.

# hciconfig -a
hci0:   Type: USB
        BD Address: x:x:x:x:x:x ACL MTU: 192:8  SCO MTU: 64:8
        UP RUNNING PSCAN ISCAN
        RX bytes:32302431 acl:220940 sco:0 events:370334 errors:0
        TX bytes:91175966 acl:515971 sco:0 commands:108 errors:0
        Features: 0xff 0xff 0x8f 0x78 0x18 0x18 0x00 0x80
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: SLAVE ACCEPT
        Name: 'igno-0'
        Class: 0x000100
        Service Classes: Unspecified
        Device Class: Computer, Uncategorized
        HCI Ver: 1.2 (0x2) HCI Rev: 0x4d9 LMP Ver: 1.2 (0x2) LMP Subver:
0x4d9
        Manufacturer: Cambridge Silicon Radio (10)

# hciconfig hci0 revision
hci0:   Type: USB
        BD Address: x:x:x:x:x:x ACL MTU: 192:8  SCO MTU: 64:8
        Build 1241
        Chip version: BlueCore02
        Max key size: 128 bit
        SCO mapping:  HCI
# hciconfig hci0 version
hci0:   Type: USB
        BD Address: x:x:x:x:x:x ACL MTU: 192:8  SCO MTU: 64:8
        HCI Ver: 1.2 (0x2) HCI Rev: 0x4d9 LMP Ver: 1.2 (0x2) LMP Subver:
0x4d9
        Manufacturer: Cambridge Silicon Radio (10)

Il lun, 2004-06-28 alle 16:02, Marcel Holtmann ha scritto:
> Hi Nicholas,
> 
> > You now have some experience based data, which dongles accept the
signed
> > apple hciproxy firmware and which one render unusable?
> 
> the D-Link revision B3 and the Allnet ALL1575 seem to work fine.

Re: [Bluez-users] Presentation slides are online

[Marcel Holtmann]

Hi Michal,

> is it possible to flash Microsoft Wireless Transceiver?

no way. I checked it and I broke one of mine. I can't even flash back
the original firmware.

Regards

Marcel




-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Presentation slides are online

[Marcel Holtmann]

Hi Diego,

> I've upgraded D-Link revision B3 and B2 with a iMac
> and both of them seem to work fine.

but the update of B4 is not working for me.

Regards

Marcel




-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users