* [Bluez-users] Invalid Exchange..
@ 2004-08-21 11:24 George Tarantilis
2004-08-21 11:51 ` Bc. Michal Semler
2004-08-21 11:52 ` Marcel Holtmann
0 siblings, 2 replies; 4+ messages in thread
From: George Tarantilis @ 2004-08-21 11:24 UTC (permalink / raw)
To: bluez-users
Hi all,
I'm trying to connect my Logitech MX900 mouse and I'm
getting a "Can't create HID control channel: Invalid
exchange" message.
Specifically:
[gtaranti@fedora gtaranti]$ /sbin/hciconfig
hci0: Type: USB
BD Address: 00:10:60:A5:11:3E ACL MTU: 192:8
SCO MTU: 64:8
UP RUNNING PSCAN ISCAN AUTH ENCRYPT
RX bytes:1063 acl:0 sco:0 events:110 errors:0
TX bytes:828 acl:0 sco:0 commands:55 errors:0
[gtaranti@fedora gtaranti]$ hidd --search
Searching ...
Connecting to device 00:07:61:05:65:22
Can't create HID control channel: Invalid exchange
[gtaranti@fedora gtaranti]$ hidd --connect
00:07:61:05:65:22
Can't create HID control channel: Invalid exchange
The hcidump logs the previous commands as:
HCIDump - HCI packet analyzer ver 1.10
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Inquiry Result (0x02) plen 15
> HCI Event: Inquiry Complete (0x01) plen 1
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Command Complete (0x0e) plen 10
> HCI Event: Command Complete (0x0e) plen 10
> HCI Event: Connect Complete (0x03) plen 11
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Command Complete (0x0e) plen 10
> HCI Event: Command Complete (0x0e) plen 10
> HCI Event: Connect Complete (0x03) plen 11
...
It seems that the server can see the device but cannot
connect to it.
I'm using the fedora core 2.6.8-1.521smp kernel and
the 2.9 bluez-libs and bluez-utils.
What am I doing wrong?
_______________________________
Do you Yahoo!?
Win 1 of 4,000 free domain names from Yahoo! Enter now.
http://promotions.yahoo.com/goldrush
-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [Bluez-users] Invalid Exchange..
2004-08-21 11:24 [Bluez-users] Invalid Exchange George Tarantilis
@ 2004-08-21 11:51 ` Bc. Michal Semler
2004-08-21 11:52 ` Marcel Holtmann
1 sibling, 0 replies; 4+ messages in thread
From: Bc. Michal Semler @ 2004-08-21 11:51 UTC (permalink / raw)
To: bluez-users
Look if you have hidp modprobed, also try upgrade to libs and utils 2.10
M.
Dne so 21. srpna 2004 13:24 George Tarantilis napsal(a):
> Hi all,
>
> I'm trying to connect my Logitech MX900 mouse and I'm
> getting a "Can't create HID control channel: Invalid
> exchange" message.
> Specifically:
>
> [gtaranti@fedora gtaranti]$ /sbin/hciconfig
> hci0: Type: USB
> BD Address: 00:10:60:A5:11:3E ACL MTU: 192:8
> SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN AUTH ENCRYPT
> RX bytes:1063 acl:0 sco:0 events:110 errors:0
> TX bytes:828 acl:0 sco:0 commands:55 errors:0
>
> [gtaranti@fedora gtaranti]$ hidd --search
> Searching ...
> Connecting to device 00:07:61:05:65:22
> Can't create HID control channel: Invalid exchange
> [gtaranti@fedora gtaranti]$ hidd --connect
> 00:07:61:05:65:22
> Can't create HID control channel: Invalid exchange
>
> The hcidump logs the previous commands as:
>
> HCIDump - HCI packet analyzer ver 1.10
> device: hci0 snap_len: 1028 filter: 0xffffffff
>
> > HCI Event: Command Status (0x0f) plen 4
> > HCI Event: Inquiry Result (0x02) plen 15
> > HCI Event: Inquiry Complete (0x01) plen 1
> > HCI Event: Command Status (0x0f) plen 4
> > HCI Event: Command Complete (0x0e) plen 10
> > HCI Event: Command Complete (0x0e) plen 10
> > HCI Event: Connect Complete (0x03) plen 11
> > HCI Event: Command Status (0x0f) plen 4
> > HCI Event: Command Complete (0x0e) plen 10
> > HCI Event: Command Complete (0x0e) plen 10
> > HCI Event: Connect Complete (0x03) plen 11
>
> ...
>
>
> It seems that the server can see the device but cannot
> connect to it.
>
> I'm using the fedora core 2.6.8-1.521smp kernel and
> the 2.9 bluez-libs and bluez-utils.
>
> What am I doing wrong?
>
>
>
>
> _______________________________
> Do you Yahoo!?
> Win 1 of 4,000 free domain names from Yahoo! Enter now.
> http://promotions.yahoo.com/goldrush
>
>
> -------------------------------------------------------
> SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
> 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
> Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
> http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Bluez-users] Invalid Exchange..
2004-08-21 11:24 [Bluez-users] Invalid Exchange George Tarantilis
2004-08-21 11:51 ` Bc. Michal Semler
@ 2004-08-21 11:52 ` Marcel Holtmann
2004-08-21 12:26 ` George Tarantilis
1 sibling, 1 reply; 4+ messages in thread
From: Marcel Holtmann @ 2004-08-21 11:52 UTC (permalink / raw)
To: George Tarantilis; +Cc: bluez-users
Hi George,
> I'm trying to connect my Logitech MX900 mouse and I'm
> getting a "Can't create HID control channel: Invalid
> exchange" message.
> Specifically:
>
> [gtaranti@fedora gtaranti]$ /sbin/hciconfig
> hci0: Type: USB
> BD Address: 00:10:60:A5:11:3E ACL MTU: 192:8
> SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN AUTH ENCRYPT
> RX bytes:1063 acl:0 sco:0 events:110 errors:0
> TX bytes:828 acl:0 sco:0 commands:55 errors:0
>
> [gtaranti@fedora gtaranti]$ hidd --search
> Searching ...
> Connecting to device 00:07:61:05:65:22
> Can't create HID control channel: Invalid exchange
> [gtaranti@fedora gtaranti]$ hidd --connect
> 00:07:61:05:65:22
> Can't create HID control channel: Invalid exchange
>
> The hcidump logs the previous commands as:
>
> HCIDump - HCI packet analyzer ver 1.10
> device: hci0 snap_len: 1028 filter: 0xffffffff
> > HCI Event: Command Status (0x0f) plen 4
> > HCI Event: Inquiry Result (0x02) plen 15
> > HCI Event: Inquiry Complete (0x01) plen 1
> > HCI Event: Command Status (0x0f) plen 4
> > HCI Event: Command Complete (0x0e) plen 10
> > HCI Event: Command Complete (0x0e) plen 10
> > HCI Event: Connect Complete (0x03) plen 11
> > HCI Event: Command Status (0x0f) plen 4
> > HCI Event: Command Complete (0x0e) plen 10
> > HCI Event: Command Complete (0x0e) plen 10
> > HCI Event: Connect Complete (0x03) plen 11
> ...
>
>
> It seems that the server can see the device but cannot
> connect to it.
>
> I'm using the fedora core 2.6.8-1.521smp kernel and
> the 2.9 bluez-libs and bluez-utils.
run "hcidump -x" as root and lets see what it shows. Do you enabled
security mode 3? It won't work with a CSR based mouse.
Regards
Marcel
-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Bluez-users] Invalid Exchange..
2004-08-21 11:52 ` Marcel Holtmann
@ 2004-08-21 12:26 ` George Tarantilis
0 siblings, 0 replies; 4+ messages in thread
From: George Tarantilis @ 2004-08-21 12:26 UTC (permalink / raw)
To: Marcel Holtmann, Bluez List
Hello Marcel,
As always I found out what the problem was after
posting.
I had a bad link for bluepin in hcifd.conf
(/usr/bin/bluepin _vs_ /bin/bluepin).
After creating the required link, all seems to work
nicely. Both the MX900 and the Apple BT Keyboard are
connected and operating flawlessly.
The only hitch was this message after the succesful
connection of both devices:
HID create error 13 (Permission denied)
I don't know what this error means, but it doesn't
seem to create any problems.
Thank you.
--- Marcel Holtmann <marcel@holtmann.org> wrote:
> Hi George,
>
> > I'm trying to connect my Logitech MX900 mouse and
> I'm
> > getting a "Can't create HID control channel:
> Invalid
> > exchange" message.
> > Specifically:
> >
> > [gtaranti@fedora gtaranti]$ /sbin/hciconfig
> > hci0: Type: USB
> > BD Address: 00:10:60:A5:11:3E ACL MTU:
> 192:8
> > SCO MTU: 64:8
> > UP RUNNING PSCAN ISCAN AUTH ENCRYPT
> > RX bytes:1063 acl:0 sco:0 events:110
> errors:0
> > TX bytes:828 acl:0 sco:0 commands:55
> errors:0
> >
> > [gtaranti@fedora gtaranti]$ hidd --search
> > Searching ...
> > Connecting to device 00:07:61:05:65:22
> > Can't create HID control channel: Invalid exchange
> > [gtaranti@fedora gtaranti]$ hidd --connect
> > 00:07:61:05:65:22
> > Can't create HID control channel: Invalid exchange
> >
> > The hcidump logs the previous commands as:
> >
> > HCIDump - HCI packet analyzer ver 1.10
> > device: hci0 snap_len: 1028 filter: 0xffffffff
> > > HCI Event: Command Status (0x0f) plen 4
> > > HCI Event: Inquiry Result (0x02) plen 15
> > > HCI Event: Inquiry Complete (0x01) plen 1
> > > HCI Event: Command Status (0x0f) plen 4
> > > HCI Event: Command Complete (0x0e) plen 10
> > > HCI Event: Command Complete (0x0e) plen 10
> > > HCI Event: Connect Complete (0x03) plen 11
> > > HCI Event: Command Status (0x0f) plen 4
> > > HCI Event: Command Complete (0x0e) plen 10
> > > HCI Event: Command Complete (0x0e) plen 10
> > > HCI Event: Connect Complete (0x03) plen 11
> > ...
> >
> >
> > It seems that the server can see the device but
> cannot
> > connect to it.
> >
> > I'm using the fedora core 2.6.8-1.521smp kernel
> and
> > the 2.9 bluez-libs and bluez-utils.
>
> run "hcidump -x" as root and lets see what it shows.
> Do you enabled
> security mode 3? It won't work with a CSR based
> mouse.
>
> Regards
>
> Marcel
>
>
>
>
>
-------------------------------------------------------
> SF.Net email is sponsored by Shop4tech.com-Lowest
> price on Blank Media
> 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R
> for only $33
> Save 50% off Retail on Ink & Toner - Free Shipping
> and Free Gift.
>
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
>
https://lists.sourceforge.net/lists/listinfo/bluez-users
>
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
http://promotions.yahoo.com/new_mail
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2004-08-21 12:26 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-08-21 11:24 [Bluez-users] Invalid Exchange George Tarantilis
2004-08-21 11:51 ` Bc. Michal Semler
2004-08-21 11:52 ` Marcel Holtmann
2004-08-21 12:26 ` George Tarantilis
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox