[Bluez-devel] testing Bleuz/SCO with hsplay

[Bluez-devel] testing Bleuz/SCO with hsplay

[Stefan de Konink]

Hello,

For the Asterisk PABX I'm testing the Bluetooth functionality of a Nokia 
phone to be used as phone channel. Still in the basic stage I allready 
have a problem.

attest works, I get the complete list of the phonenumbers and names. So 
heading straight for hsplay. The phone is connected by bluetooth, the 
little headset icon is on the phone's display, but when I call out with 
the phone I still have no MP3 playing on my ear.

Some output of hciconfig:
hci0:   Type: USB
         BD Address: 00:02:8A:DB:39:04 ACL MTU: 192:8  SCO MTU: 64:8
         Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
                 <3-slot packets> <5-slot packets> <encryption> <slot 
offset>
                 <timing accuracy> <role switch> <hold mode> <sniff mode>
                 <park state> <RSSI> <channel quality> <SCO link> <HV2 
packets>
                 <HV3 packets> <u-law log> <A-law log> <CVSD> <paging 
scheme>
                 <power control> <transparent SCO>

hci0:   Type: USB
         BD Address: 00:02:8A:DB:39:04 ACL MTU: 192:8  SCO MTU: 64:8
         HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP 
Subver: 0x20d
         Manufacturer: Cambridge Silicon Radio (10)

hci0:   Type: USB
         BD Address: 00:02:8A:DB:39:04 ACL MTU: 192:8  SCO MTU: 64:8
         HCI 16.4
         Chip version: BlueCore02
         Max key size: 56 bit
         SCO mapping:  HCI


Anyone some pointers to look at?


Greetings,

Stefan de Konink


-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] testing Bleuz/SCO with hsplay

[Marcel Holtmann]

Hi Stefan,

> For the Asterisk PABX I'm testing the Bluetooth functionality of a Nokia 
> phone to be used as phone channel. Still in the basic stage I allready 
> have a problem.
> 
> attest works, I get the complete list of the phonenumbers and names. So 
> heading straight for hsplay. The phone is connected by bluetooth, the 
> little headset icon is on the phone's display, but when I call out with 
> the phone I still have no MP3 playing on my ear.

I think this is a thinko. Pair your headset with your PC and then use
hstest or hsplay to get music on the headset.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] testing Bleuz/SCO with hsplay

[Marcel Holtmann]

Hi Stefan,

> > I think this is a thinko. Pair your headset with your PC and then use
> > hstest or hsplay to get music on the headset.
> 
> Probably I told it the wrong way, I want my pc to act as a headset for 
> my phone. I know I'm odd.
> 
> Does this Harry Potter stuff require some magic to the code or is this 
> not possible?

you can't do that with hstest.

Regards

Marcel




-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

[Bluez-devel] Compiling Bluez into suse 9.1 pro

[Massimiliano Cuccia]

I downloaded from cvs the source of bluez
I can compile only libs, sdp and hcidump
the others (pan, utils, obex, bluefw and hciemu) are
giving errors


1 --------------------- running bootstrap give an
error
"bad interpreter: no such file or directory"
So I proceded running the contents of the file itself
(copy-paste in the command line, excluding
"#!/bin/sh") for every bootstrap file.

doing so I obtain a configure file, so I can proceeds
running configure, than make and after make install.

These are the problems encountered during configure or
make phase of compilation.

2 --------------------- for pan and for hciemu, 
running configure I obtains "configure: error: cannot
run /bin/sh ./config.sub"
3 --------------------- for utils, 
make fails, this is the output:
make  all-recursive
make[1]: Entering directory `/home/maxc/prj/4/utils'
Making all in hcid
make[2]: Entering directory
`/home/maxc/prj/4/utils/hcid'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory
`/home/maxc/prj/4/utils/hcid'
Making all in tools
make[2]: Entering directory
`/home/maxc/prj/4/utils/tools'
gcc -DHAVE_CONFIG_H -I. -I. -I..    -I/usr/include 
-I/usr/include -Wall -O2 -c sdptool.c
sdptool.c: In function `add_audio_source':
sdptool.c:1583: error: `AUDIO_SOURCE_SVCLASS_ID'
undeclared (first use in this function)
sdptool.c:1583: error: (Each undeclared identifier is
reported only once
sdptool.c:1583: error: for each function it appears
in.)
sdptool.c:1587: error: `ADVANCED_AUDIO_PROFILE_ID'
undeclared (first use in this function)
sdptool.c:1598: error: `AVDTP_UUID' undeclared (first
use in this function)
sdptool.c: In function `add_audio_sink':
sdptool.c:1642: error: `AUDIO_SINK_SVCLASS_ID'
undeclared (first use in this function)
sdptool.c:1646: error: `ADVANCED_AUDIO_PROFILE_ID'
undeclared (first use in this function)
sdptool.c:1657: error: `AVDTP_UUID' undeclared (first
use in this function)
sdptool.c: At top level:
sdptool.c:1706: error: `AUDIO_SOURCE_SVCLASS_ID'
undeclared here (not in a function)
sdptool.c:1706: error: initializer element is not
constant
sdptool.c:1706: error: (near initialization for
`service[13].class')
sdptool.c:1706: error: initializer element is not
constant
sdptool.c:1706: error: (near initialization for
`service[13]')
sdptool.c:1707: error: `AUDIO_SINK_SVCLASS_ID'
undeclared here (not in a function)
sdptool.c:1707: error: initializer element is not
constant
sdptool.c:1707: error: (near initialization for
`service[14].class')
sdptool.c:1707: error: initializer element is not
constant
sdptool.c:1707: error: (near initialization for
`service[14]')
sdptool.c:1709: error: initializer element is not
constant
sdptool.c:1709: error: (near initialization for
`service[15]')
make[2]: *** [sdptool.o] Error 1
make[2]: Leaving directory
`/home/maxc/prj/4/utils/tools'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/maxc/prj/4/utils'
make: *** [all] Error 2

4 --------------------- for bluefw, 
doing make I obtain this output:
"/usr/src/linux/include/linux/usbdevice_fs.h:49
variable or field '__user' declared void"
5 --------------------- for obex,
during make, the "gcc ... -o btobex ..."
say: "./obex.c: undefined reference to
'OBEX_SetTransportMTU'"

How to solve these problems?
Can you help me?

thanks for your time

(sorry for cross posting, similar mails was sent to
bluez-users list, maybe this is a better place for
these problems)


		
__________________________________
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!
http://promotions.yahoo.com/new_mail


-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

[Bluez-devel] testing Bleuz/SCO with hsplay

[Suriyan]

Hi Stefan,

> > I think this is a thinko. Pair your headset with your PC and then use
> > hstest or hsplay to get music on the headset.
>
> Probably I told it the wrong way, I want my pc to act as a headset for
> my phone. I know I'm odd.
>
> Does this Harry Potter stuff require some magic to the code or is this
> not possible?

Try to visit
http://www.soft.uni-linz.ac.at/_wiki/tiki-index.php?page=ProjectBluezHandsfree

This maybe work for you.

Regards,

Suriyan.




-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel