* [Bluez-users] Packages to Use For Zaurus SL-6000L
@ 2004-10-16 6:50 Murat Bog
2004-10-16 11:55 ` Marcel Holtmann
2004-10-18 9:21 ` Stephen Crane
0 siblings, 2 replies; 6+ messages in thread
From: Murat Bog @ 2004-10-16 6:50 UTC (permalink / raw)
To: bluez-users
Hello,
I am wondering which combination of Bluez packages I
should be installing on a Zaurus 6000L with factory
configuration(2.4.18-rml7-pxa3-embedix with ROM
version 1.12) to work with an AmbiCom BT2000CF card.
The latest set of packages do not seem to be working
together. When I install bluez-utils-2.10_arm.ipk, it
reports a dependency error when used with
bluez-kernel-2.4.18-mh15_arm.ipk and
bluez-libs-2.10_arm.ipk.
I also see that when I run "/etc/rc.d/init.d/bluetooth
start" command, I get the following message:
"Starting Bluetooth subsystem:/usr/sbin/hcid: error
while loading shared libraries: libsdp.so.2: cannot
load shared object file: No such file or directory"
Thanks,
Murat Bog
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] Packages to Use For Zaurus SL-6000L
2004-10-16 6:50 [Bluez-users] Packages to Use For Zaurus SL-6000L Murat Bog
@ 2004-10-16 11:55 ` Marcel Holtmann
2004-10-18 9:21 ` Stephen Crane
1 sibling, 0 replies; 6+ messages in thread
From: Marcel Holtmann @ 2004-10-16 11:55 UTC (permalink / raw)
To: murat_bog; +Cc: BlueZ Mailing List
Hi Murat,
> I am wondering which combination of Bluez packages I
> should be installing on a Zaurus 6000L with factory
> configuration(2.4.18-rml7-pxa3-embedix with ROM
> version 1.12) to work with an AmbiCom BT2000CF card.
>
> The latest set of packages do not seem to be working
> together. When I install bluez-utils-2.10_arm.ipk, it
> reports a dependency error when used with
> bluez-kernel-2.4.18-mh15_arm.ipk and
> bluez-libs-2.10_arm.ipk.
>
> I also see that when I run "/etc/rc.d/init.d/bluetooth
> start" command, I get the following message:
>
> "Starting Bluetooth subsystem:/usr/sbin/hcid: error
> while loading shared libraries: libsdp.so.2: cannot
> load shared object file: No such file or directory"
you need an updated kernel, because the Bluetooth support of the 2.4.18
kernel is outdated. However I don't own a Zaurus and I have no idea how
to fix this the right way.
Regards
Marcel
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] Packages to Use For Zaurus SL-6000L
2004-10-16 6:50 [Bluez-users] Packages to Use For Zaurus SL-6000L Murat Bog
2004-10-16 11:55 ` Marcel Holtmann
@ 2004-10-18 9:21 ` Stephen Crane
2004-10-18 19:29 ` Murat Bog
1 sibling, 1 reply; 6+ messages in thread
From: Stephen Crane @ 2004-10-18 9:21 UTC (permalink / raw)
To: murat_bog; +Cc: bluez-users
Hi,
On Sat, 2004-10-16 at 07:50, Murat Bog wrote:
> Hello,
>
> I am wondering which combination of Bluez packages I
> should be installing on a Zaurus 6000L with factory
> configuration(2.4.18-rml7-pxa3-embedix with ROM
> version 1.12) to work with an AmbiCom BT2000CF card.
>
> The latest set of packages do not seem to be working
> together. When I install bluez-utils-2.10_arm.ipk, it
> reports a dependency error when used with
> bluez-kernel-2.4.18-mh15_arm.ipk and
> bluez-libs-2.10_arm.ipk.
>
> I also see that when I run "/etc/rc.d/init.d/bluetooth
> start" command, I get the following message:
>
> "Starting Bluetooth subsystem:/usr/sbin/hcid: error
> while loading shared libraries: libsdp.so.2: cannot
> load shared object file: No such file or directory"
Pretty much all you need to know is described here:
http://bluez.sourceforge.net/download/zaurus/README.txt
Regards,
Steve
--
Stephen Crane, Rococo Software Ltd. http://www.rococosoft.com
steve.crane@rococosoft.com +353-1-6601315 (ext 209)
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] Packages to Use For Zaurus SL-6000L
2004-10-18 9:21 ` Stephen Crane
@ 2004-10-18 19:29 ` Murat Bog
2004-10-19 9:08 ` Stephen Crane
0 siblings, 1 reply; 6+ messages in thread
From: Murat Bog @ 2004-10-18 19:29 UTC (permalink / raw)
To: Stephen Crane; +Cc: bluez-users
Thanks for the reply.
Before I sent my query, I had tried using the
following combination of packages specified in your
readme file:
bluez-kernel-2.4.18-mh14_arm.ipk
bluez-libs-2.8_arm.ipk
bluez-utils-2.8_arm.ipk
They had installed without errors. I initially got
the following message when I started the bluetooth
services
Starting Bluetooth subsystem: hcid sdpdCan't open
RFCOMM control socket: No such file or directory
rfcomm.
It looked like the rfcomm bluez modules were not
installed by the kernel, so I did
insmod l2cap
insmod rfcomm
depmod -a
and restarted bluetooth successfully.
Next, I ran
hciattach /dev/ttyS3 bt2000c
which also executed successfully and returned the
following response
CSR build ID 0x02-0x0D
The problem is when I tried running hciconfig after
this, I got
hci0: Type: UART
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0
SCO MTU: 0:0
DOWN INIT RUNNING
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:4 acl:0 sco:0 commands:1 errors:0
but after a short while the status changed to just
"DOWN".
If I tried to reset or bring up hci0 at this point, I
got the following error.
Can't init device hci0. Connection timed out(110)
I don't know if I'm missing something basic but I had
thought that perhaps there was a driver issue which
may have been fixed in the later versions of the bluez
packages under the zaurus download directory.
Regards,
Murat
--- Stephen Crane <steve.crane@rococosoft.com> wrote:
> Hi,
>
> On Sat, 2004-10-16 at 07:50, Murat Bog wrote:
> > Hello,
> >
> > I am wondering which combination of Bluez packages
> I
> > should be installing on a Zaurus 6000L with
> factory
> > configuration(2.4.18-rml7-pxa3-embedix with ROM
> > version 1.12) to work with an AmbiCom BT2000CF
> card.
> >
> > The latest set of packages do not seem to be
> working
> > together. When I install
> bluez-utils-2.10_arm.ipk, it
> > reports a dependency error when used with
> > bluez-kernel-2.4.18-mh15_arm.ipk and
> > bluez-libs-2.10_arm.ipk.
> >
> > I also see that when I run
> "/etc/rc.d/init.d/bluetooth
> > start" command, I get the following message:
> >
> > "Starting Bluetooth subsystem:/usr/sbin/hcid:
> error
> > while loading shared libraries: libsdp.so.2:
> cannot
> > load shared object file: No such file or
> directory"
>
> Pretty much all you need to know is described here:
>
http://bluez.sourceforge.net/download/zaurus/README.txt
>
> Regards,
> Steve
> --
> Stephen Crane, Rococo Software Ltd.
> http://www.rococosoft.com
> steve.crane@rococosoft.com +353-1-6601315 (ext 209)
>
>
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [Bluez-users] Packages to Use For Zaurus SL-6000L
2004-10-18 19:29 ` Murat Bog
@ 2004-10-19 9:08 ` Stephen Crane
2004-10-19 16:38 ` Murat Bog
0 siblings, 1 reply; 6+ messages in thread
From: Stephen Crane @ 2004-10-19 9:08 UTC (permalink / raw)
To: murat_bog; +Cc: bluez-users
Hi,
On Mon, 2004-10-18 at 20:29, Murat Bog wrote:
> Before I sent my query, I had tried using the
> following combination of packages specified in your
> readme file:
>
> bluez-kernel-2.4.18-mh14_arm.ipk
> bluez-libs-2.8_arm.ipk
> bluez-utils-2.8_arm.ipk
>
> They had installed without errors. I initially got
> the following message when I started the bluetooth
> services
>
> Starting Bluetooth subsystem: hcid sdpdCan't open
> RFCOMM control socket: No such file or directory
> rfcomm.
You need to edit modules.conf:
alias net-pf-31 bluez
alias bt-proto-0 l2cap
alias bt-proto-1 hci
alias bt-proto-2 sco
alias bt-proto-3 rfcomm
alias bt-proto-4 bnep
> It looked like the rfcomm bluez modules were not
> installed by the kernel, so I did
>
> insmod l2cap
> insmod rfcomm
> depmod -a
>
> and restarted bluetooth successfully.
>
> Next, I ran
>
> hciattach /dev/ttyS3 bt2000c
>
> which also executed successfully and returned the
> following response
>
> CSR build ID 0x02-0x0D
>
> The problem is when I tried running hciconfig after
> this, I got
>
> hci0: Type: UART
> BD Address: 00:00:00:00:00:00 ACL MTU: 0:0
> SCO MTU: 0:0
> DOWN INIT RUNNING
> RX bytes:0 acl:0 sco:0 events:0 errors:0
> TX bytes:4 acl:0 sco:0 commands:1 errors:0
>
> but after a short while the status changed to just
> "DOWN".
>
> If I tried to reset or bring up hci0 at this point, I
> got the following error.
>
> Can't init device hci0. Connection timed out(110)
>
> I don't know if I'm missing something basic but I had
> thought that perhaps there was a driver issue which
> may have been fixed in the later versions of the bluez
> packages under the zaurus download directory.
This does indeed look like a driver issue. Try installing the -mh15
package; however I don't know if it will help or not.
> Regards,
> Murat
Steve
--
Stephen Crane, Rococo Software Ltd. http://www.rococosoft.com
steve.crane@rococosoft.com +353-1-6601315 (ext 209)
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] Packages to Use For Zaurus SL-6000L
2004-10-19 9:08 ` Stephen Crane
@ 2004-10-19 16:38 ` Murat Bog
0 siblings, 0 replies; 6+ messages in thread
From: Murat Bog @ 2004-10-19 16:38 UTC (permalink / raw)
To: Stephen Crane; +Cc: bluez-users
Well, good news :).
I tried using dmesg to see if I can get any more clues
to my problem. I saw some errors about unknown H4 (?)
protocol, which reminded me of a message I had seen in
the archive about using the flow control option. So I
tried hciattach with the flow control option specified
and the interface came up!
Thanks for the patient help,
Murat
--- Stephen Crane <steve.crane@rococosoft.com> wrote:
> Hi,
>
> On Mon, 2004-10-18 at 20:29, Murat Bog wrote:
> > Before I sent my query, I had tried using the
> > following combination of packages specified in
> your
> > readme file:
> >
> > bluez-kernel-2.4.18-mh14_arm.ipk
> > bluez-libs-2.8_arm.ipk
> > bluez-utils-2.8_arm.ipk
> >
> > They had installed without errors. I initially
> got
> > the following message when I started the bluetooth
> > services
> >
> > Starting Bluetooth subsystem: hcid sdpdCan't open
> > RFCOMM control socket: No such file or directory
> > rfcomm.
>
> You need to edit modules.conf:
>
> alias net-pf-31 bluez
> alias bt-proto-0 l2cap
> alias bt-proto-1 hci
> alias bt-proto-2 sco
> alias bt-proto-3 rfcomm
> alias bt-proto-4 bnep
>
> > It looked like the rfcomm bluez modules were not
> > installed by the kernel, so I did
> >
> > insmod l2cap
> > insmod rfcomm
> > depmod -a
> >
> > and restarted bluetooth successfully.
> >
> > Next, I ran
> >
> > hciattach /dev/ttyS3 bt2000c
> >
> > which also executed successfully and returned the
> > following response
> >
> > CSR build ID 0x02-0x0D
> >
> > The problem is when I tried running hciconfig
> after
> > this, I got
> >
> > hci0: Type: UART
> > BD Address: 00:00:00:00:00:00 ACL MTU: 0:0
>
> > SCO MTU: 0:0
> > DOWN INIT RUNNING
> > RX bytes:0 acl:0 sco:0 events:0 errors:0
> > TX bytes:4 acl:0 sco:0 commands:1 errors:0
> >
> > but after a short while the status changed to just
> > "DOWN".
> >
> > If I tried to reset or bring up hci0 at this
> point, I
> > got the following error.
> >
> > Can't init device hci0. Connection timed out(110)
> >
> > I don't know if I'm missing something basic but I
> had
> > thought that perhaps there was a driver issue
> which
> > may have been fixed in the later versions of the
> bluez
> > packages under the zaurus download directory.
>
> This does indeed look like a driver issue. Try
> installing the -mh15
> package; however I don't know if it will help or
> not.
>
> > Regards,
> > Murat
>
> Steve
> --
> Stephen Crane, Rococo Software Ltd.
> http://www.rococosoft.com
> steve.crane@rococosoft.com +353-1-6601315 (ext 209)
>
>
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2004-10-19 16:38 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-10-16 6:50 [Bluez-users] Packages to Use For Zaurus SL-6000L Murat Bog
2004-10-16 11:55 ` Marcel Holtmann
2004-10-18 9:21 ` Stephen Crane
2004-10-18 19:29 ` Murat Bog
2004-10-19 9:08 ` Stephen Crane
2004-10-19 16:38 ` Murat Bog
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox