Again dund

Again dund

[Peter K. Martin]

[-- Attachment #1: Type: text/plain, Size: 3086 bytes --]

Hi Marcel,
I tried to start hcid by typing it at the command-line, but I don't know how
to control if this daemon runs.
 
Hcidump -x gives nearly no response, only the version-no
 
Some other informations, but I don't know how to step further in oredr to
get the BT connection
 
Linux-Notebook:~ # hcitool scan

Scanning ...

        00:0B:CE:00:01:8F       Bluetooth-Modul

Linux-Notebook:~ # hciconfig

hci0:   Type: USB

        BD Address: 00:03:7A:08:54:80 ACL MTU: 192:8  SCO MTU: 64:8

        UP RUNNING PSCAN ISCAN

        RX bytes:676 acl:0 sco:0 events:22 errors:0

        TX bytes:334 acl:0 sco:0 commands:16 errors:0

 

Linux-Notebook:~ # hciconfig hci0 up

Linux-Notebook:~ # hciconfig -a

hci0:   Type: USB

        BD Address: 00:03:7A:08:54:80 ACL MTU: 192:8  SCO MTU: 64:8

        UP RUNNING PSCAN ISCAN

        RX bytes:676 acl:0 sco:0 events:22 errors:0

        TX bytes:334 acl:0 sco:0 commands:16 errors:0

        Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00

        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3

        Link policy: RSWITCH HOLD SNIFF PARK

        Link mode: SLAVE ACCEPT

        Name: 'BlueZ (0)'

        Class: 0x000100

        Service Classes: Unspecified

        Device Class: Computer, Uncategorized

        HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver:
0x20d

        Manufacturer: Cambridge Silicon Radio (10)

 

 

Linux-Notebook:~ # hcitool scan

Scanning ...

        00:0B:CE:00:01:8F       Bluetooth-Modul

Linux-Notebook:~ # hcitool info 00:0B:CE:00:01:8F

Requesting information ...

        BD Address:  00:0B:CE:00:01:8F

        Device Name: Bluetooth-Modul

        LMP Version: 1.1 (0x1) LMP Subversion: 0x175

        Manufacturer: Cambridge Silicon Radio (10)

        Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00

                <3-slot packets> <5-slot packets> <encryption> <slot offset>

                <timing accuracy> <role switch> <hold mode> <sniff mode>

                <park state> <RSSI> <channel quality> <SCO link> <HV2
packets>

                <HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme>

                <power control> <transparent SCO>

Linux-Notebook:~ # rfcomm show

Linux-Notebook:~ # rfcomm bind 0 00:0B:CE:00:01:8F 1

Linux-Notebook:~ # rfcomm show

rfcomm0: 00:0B:CE:00:01:8F channel 1 clean

Linux-Notebook:~ # rfcomm release 0

Linux-Notebook:~ # rfcomm show

Linux-Notebook:~ # rfcomm connect 0 00:0B:CE:00:01:8F 1

Can't connect RFCOMM socket: Connection refused

 

 

Linux-Notebook:~ # sdptool browse 00:0B:CE:00:01:8F

Failed to connect to SDP server on 00:0B:CE:00:01:8F: Connection refused

 

Marcel, please be so kind to help me and give me some more ideas.

 

In the meantime I tried to change to kernel-version 2.6.8.1 --> the only
result was a KERNEL PANIC

I have a SuSE 9.1 Distri and now I met the wall, so I remove to the running
kernel

 

Thanks for help on BT

Peter


[-- Attachment #2: Type: text/html, Size: 16261 bytes --]

[Bluez-users] Re: Again dund

[Marcel Holtmann]

Hi Peter,

> I tried to start hcid by typing it at the command-line, but I don't
> know how to control if this daemon runs.

check with ps. You must run it as root and only one hcid process at the
same time is allowed.
 
> Hcidump -x gives nearly no response, only the version-no

Then there is something wrong. You must at least see something when you
run an inquiry or create a connection. Do this as root.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users